[OpenWrt-Devel] [PATCH 00/23] add 3.14 kernel support for ar71xx

Zhao, Gang

2014-07-26 02:48:36 UTC

Signed-off-by: Zhao, Gang <***@gmail.com>
---
target/linux/ar71xx/config-3.14 | 292 ++++
.../files-3.14/arch/mips/ath79/dev-ap9x-pci.c | 159 +++
.../files-3.14/arch/mips/ath79/dev-ap9x-pci.h | 48 +
.../ar71xx/files-3.14/arch/mips/ath79/dev-dsa.c | 36 +
.../ar71xx/files-3.14/arch/mips/ath79/dev-dsa.h | 21 +
.../ar71xx/files-3.14/arch/mips/ath79/dev-eth.c | 1209 ++++++++++++++++
.../ar71xx/files-3.14/arch/mips/ath79/dev-eth.h | 52 +
.../ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.c | 118 ++
.../ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.h | 17 +
.../ar71xx/files-3.14/arch/mips/ath79/dev-nfc.c | 141 ++
.../ar71xx/files-3.14/arch/mips/ath79/dev-nfc.h | 34 +
.../files-3.14/arch/mips/ath79/mach-alfa-ap96.c | 154 ++
.../files-3.14/arch/mips/ath79/mach-alfa-nx.c | 113 ++
.../files-3.14/arch/mips/ath79/mach-all0258n.c | 88 ++
.../files-3.14/arch/mips/ath79/mach-all0315n.c | 85 ++
.../ar71xx/files-3.14/arch/mips/ath79/mach-ap113.c | 84 ++
.../ar71xx/files-3.14/arch/mips/ath79/mach-ap132.c | 189 +++
.../ar71xx/files-3.14/arch/mips/ath79/mach-ap83.c | 275 ++++
.../ar71xx/files-3.14/arch/mips/ath79/mach-ap96.c | 142 ++
.../files-3.14/arch/mips/ath79/mach-archer-c7.c | 257 ++++
.../files-3.14/arch/mips/ath79/mach-aw-nr580.c | 107 ++
.../arch/mips/ath79/mach-bhu-bxu2000n2-a.c | 120 ++
.../files-3.14/arch/mips/ath79/mach-cap4200ag.c | 131 ++
.../files-3.14/arch/mips/ath79/mach-carambola2.c | 114 ++
.../files-3.14/arch/mips/ath79/mach-dir-505-a1.c | 116 ++
.../files-3.14/arch/mips/ath79/mach-dir-600-a1.c | 159 +++
.../files-3.14/arch/mips/ath79/mach-dir-615-c1.c | 133 ++
.../files-3.14/arch/mips/ath79/mach-dir-825-b1.c | 191 +++
.../files-3.14/arch/mips/ath79/mach-dir-825-c1.c | 241 ++++
.../files-3.14/arch/mips/ath79/mach-dragino2.c | 127 ++
.../files-3.14/arch/mips/ath79/mach-eap7660d.c | 181 +++
.../files-3.14/arch/mips/ath79/mach-el-m150.c | 112 ++
.../files-3.14/arch/mips/ath79/mach-el-mini.c | 86 ++
.../files-3.14/arch/mips/ath79/mach-esr1750.c | 176 +++
.../files-3.14/arch/mips/ath79/mach-ew-dorin.c | 144 ++
.../files-3.14/arch/mips/ath79/mach-gl-inet.c | 104 ++
.../files-3.14/arch/mips/ath79/mach-gs-oolite.c | 103 ++
.../arch/mips/ath79/mach-hiwifi-hc6361.c | 115 ++
.../files-3.14/arch/mips/ath79/mach-hornet-ub.c | 137 ++
.../files-3.14/arch/mips/ath79/mach-ja76pf.c | 190 +++
.../files-3.14/arch/mips/ath79/mach-jwap003.c | 95 ++
.../ar71xx/files-3.14/arch/mips/ath79/mach-mr600.c | 176 +++
.../files-3.14/arch/mips/ath79/mach-mynet-n600.c | 202 +++
.../files-3.14/arch/mips/ath79/mach-mynet-n750.c | 226 +++
.../files-3.14/arch/mips/ath79/mach-mynet-rext.c | 178 +++
.../files-3.14/arch/mips/ath79/mach-mzk-w04nu.c | 124 ++
.../files-3.14/arch/mips/ath79/mach-mzk-w300nh.c | 115 ++
.../files-3.14/arch/mips/ath79/mach-nbg460n.c | 220 +++
.../files-3.14/arch/mips/ath79/mach-nbg6716.c | 268 ++++
.../ar71xx/files-3.14/arch/mips/ath79/mach-om2p.c | 225 +++
.../ar71xx/files-3.14/arch/mips/ath79/mach-pb42.c | 83 ++
.../ar71xx/files-3.14/arch/mips/ath79/mach-pb92.c | 70 +
.../files-3.14/arch/mips/ath79/mach-rb2011.c | 331 +++++
.../ar71xx/files-3.14/arch/mips/ath79/mach-rb4xx.c | 465 ++++++
.../ar71xx/files-3.14/arch/mips/ath79/mach-rb750.c | 346 +++++
.../ar71xx/files-3.14/arch/mips/ath79/mach-rb91x.c | 349 +++++
.../ar71xx/files-3.14/arch/mips/ath79/mach-rb95x.c | 258 ++++
.../files-3.14/arch/mips/ath79/mach-rbsxtlite.c | 238 ++++
.../files-3.14/arch/mips/ath79/mach-rw2458n.c | 91 ++
.../files-3.14/arch/mips/ath79/mach-tew-632brp.c | 111 ++
.../files-3.14/arch/mips/ath79/mach-tew-673gru.c | 198 +++
.../files-3.14/arch/mips/ath79/mach-tew-712br.c | 153 ++
.../files-3.14/arch/mips/ath79/mach-tew-732br.c | 127 ++
.../files-3.14/arch/mips/ath79/mach-tl-mr11u.c | 183 +++
.../files-3.14/arch/mips/ath79/mach-tl-mr13u.c | 107 ++
.../files-3.14/arch/mips/ath79/mach-tl-mr3020.c | 126 ++
.../files-3.14/arch/mips/ath79/mach-tl-mr3x20.c | 147 ++
.../arch/mips/ath79/mach-tl-wa830re-v2.c | 132 ++
.../arch/mips/ath79/mach-tl-wa901nd-v2.c | 104 ++
.../files-3.14/arch/mips/ath79/mach-tl-wa901nd.c | 127 ++
.../files-3.14/arch/mips/ath79/mach-tl-wax50re.c | 313 ++++
.../files-3.14/arch/mips/ath79/mach-tl-wdr3500.c | 169 +++
.../files-3.14/arch/mips/ath79/mach-tl-wdr4300.c | 205 +++
.../arch/mips/ath79/mach-tl-wr1041n-v2.c | 138 ++
.../arch/mips/ath79/mach-tl-wr1043nd-v2.c | 217 +++
.../files-3.14/arch/mips/ath79/mach-tl-wr1043nd.c | 141 ++
.../files-3.14/arch/mips/ath79/mach-tl-wr2543n.c | 156 ++
.../files-3.14/arch/mips/ath79/mach-tl-wr703n.c | 118 ++
.../files-3.14/arch/mips/ath79/mach-tl-wr720n-v3.c | 109 ++
.../arch/mips/ath79/mach-tl-wr741nd-v4.c | 187 +++
.../files-3.14/arch/mips/ath79/mach-tl-wr741nd.c | 130 ++
.../files-3.14/arch/mips/ath79/mach-tl-wr841n-v8.c | 225 +++
.../files-3.14/arch/mips/ath79/mach-tl-wr841n-v9.c | 138 ++
.../files-3.14/arch/mips/ath79/mach-tl-wr841n.c | 140 ++
.../files-3.14/arch/mips/ath79/mach-tl-wr941nd.c | 121 ++
.../ar71xx/files-3.14/arch/mips/ath79/mach-ubnt.c | 205 +++
.../files-3.14/arch/mips/ath79/mach-whr-hp-g300n.c | 155 ++
.../files-3.14/arch/mips/ath79/mach-wlae-ag300n.c | 114 ++
.../files-3.14/arch/mips/ath79/mach-wlr8100.c | 205 +++
.../files-3.14/arch/mips/ath79/mach-wndap360.c | 105 ++
.../files-3.14/arch/mips/ath79/mach-wndr3700.c | 172 +++
.../files-3.14/arch/mips/ath79/mach-wndr4300.c | 208 +++
.../files-3.14/arch/mips/ath79/mach-wnr2000-v3.c | 115 ++
.../files-3.14/arch/mips/ath79/mach-wnr2000.c | 145 ++
.../files-3.14/arch/mips/ath79/mach-wnr2200.c | 137 ++
.../ar71xx/files-3.14/arch/mips/ath79/mach-wp543.c | 109 ++
.../ar71xx/files-3.14/arch/mips/ath79/mach-wpe72.c | 97 ++
.../files-3.14/arch/mips/ath79/mach-wrt160nl.c | 126 ++
.../files-3.14/arch/mips/ath79/mach-wrt400n.c | 161 +++
.../arch/mips/ath79/mach-wzr-hp-ag300h.c | 205 +++
.../arch/mips/ath79/mach-wzr-hp-g300nh.c | 279 ++++
.../arch/mips/ath79/mach-wzr-hp-g300nh2.c | 170 +++
.../files-3.14/arch/mips/ath79/mach-wzr-hp-g450h.c | 165 +++
.../files-3.14/arch/mips/ath79/mach-zcn-1523h.c | 154 ++
.../ar71xx/files-3.14/arch/mips/ath79/nvram.c | 80 ++
.../ar71xx/files-3.14/arch/mips/ath79/nvram.h | 19 +
.../files-3.14/arch/mips/ath79/pci-ath9k-fixup.c | 123 ++
.../files-3.14/arch/mips/ath79/pci-ath9k-fixup.h | 6 +
.../ar71xx/files-3.14/arch/mips/ath79/routerboot.c | 249 ++++
.../ar71xx/files-3.14/arch/mips/ath79/routerboot.h | 57 +
.../arch/mips/include/asm/fw/myloader/myloader.h | 34 +
.../mips/include/asm/mach-ath79/ag71xx_platform.h | 65 +
.../arch/mips/include/asm/mach-ath79/mach-rb750.h | 84 ++
.../arch/mips/include/asm/mach-ath79/rb4xx_cpld.h | 48 +
.../ar71xx/files-3.14/drivers/gpio/gpio-latch.c | 219 +++
.../files-3.14/drivers/gpio/gpio-nxp-74hc153.c | 247 ++++
.../ar71xx/files-3.14/drivers/leds/leds-rb750.c | 144 ++
.../files-3.14/drivers/leds/leds-wndr3700-usb.c | 76 +
.../files-3.14/drivers/mtd/nand/ar934x_nfc.c | 1504 ++++++++++++++++++++
.../files-3.14/drivers/mtd/nand/rb4xx_nand.c | 305 ++++
.../files-3.14/drivers/mtd/nand/rb750_nand.c | 354 +++++
.../files-3.14/drivers/mtd/nand/rb91x_nand.c | 377 +++++
.../ar71xx/files-3.14/drivers/mtd/tplinkpart.c | 199 +++
.../ar71xx/files-3.14/drivers/mtd/wrt160nl_part.c | 207 +++
.../ar71xx/files-3.14/drivers/net/dsa/mv88e6063.c | 294 ++++
.../drivers/net/ethernet/atheros/ag71xx/Kconfig | 33 +
.../drivers/net/ethernet/atheros/ag71xx/Makefile | 15 +
.../drivers/net/ethernet/atheros/ag71xx/ag71xx.h | 476 +++++++
.../net/ethernet/atheros/ag71xx/ag71xx_ar7240.c | 1202 ++++++++++++++++
.../net/ethernet/atheros/ag71xx/ag71xx_ar8216.c | 44 +
.../net/ethernet/atheros/ag71xx/ag71xx_debugfs.c | 284 ++++
.../net/ethernet/atheros/ag71xx/ag71xx_ethtool.c | 124 ++
.../net/ethernet/atheros/ag71xx/ag71xx_main.c | 1325 +++++++++++++++++
.../net/ethernet/atheros/ag71xx/ag71xx_mdio.c | 318 +++++
.../net/ethernet/atheros/ag71xx/ag71xx_phy.c | 235 +++
.../linux/ar71xx/files-3.14/drivers/spi/spi-ap83.c | 283 ++++
.../ar71xx/files-3.14/drivers/spi/spi-rb4xx-cpld.c | 441 ++++++
.../ar71xx/files-3.14/drivers/spi/spi-rb4xx.c | 507 +++++++
.../ar71xx/files-3.14/drivers/spi/spi-vsc7385.c | 621 ++++++++
.../ar71xx/files-3.14/include/linux/nxp_74hc153.h | 24 +
.../files-3.14/include/linux/platform/ar934x_nfc.h | 38 +
.../include/linux/platform_data/gpio-latch.h | 14 +
.../include/linux/platform_data/rb91x_nand.h | 16 +
.../ar71xx/files-3.14/include/linux/spi/vsc7385.h | 19 +
target/linux/ar71xx/files-3.14/net/dsa/mv88e6063.c | 294 ++++
...S-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch | 31 +
...simplify-platform_get_resource_byname-dev.patch | 70 +
...th79-Avoid-using-unitialized-reg-variable.patch | 42 +
...r933x_uart-convert-to-use-devm_-functions.patch | 72 +
...h79-wdt-avoid-spurious-restarts-on-AR934x.patch | 48 +
...ath79-make-chipselect-logic-more-flexible.patch | 310 ++++
.../213-MIPS-ath79-fix-ar933x-wmac-reset.patch | 31 +
.../220-add_cpu_feature_overrides.patch | 28 +
.../300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch | 21 +
.../310-lib-add-rle-decompression.patch | 124 ++
.../401-mtd-physmap-add-lock-unlock.patch | 94 ++
.../402-mtd-SST39VF6401B-support.patch | 29 +
.../403-mtd_fix_cfi_cmdset_0002_status_check.patch | 69 +
.../patches-3.14/404-mtd-wrt160nl-trx-parser.patch | 25 +
.../405-mtd-tp-link-partition-parser.patch | 34 +
...mtd-m25p80-allow-to-specify-max-read-size.patch | 109 ++
...low-to-pass-probe-types-via-platform-data.patch | 23 +
.../408-mtd-redboot_partition_scan.patch | 44 +
.../patches-3.14/409-mtd-rb4xx_nand_driver.patch | 21 +
.../patches-3.14/410-mtd-rb750-nand-driver.patch | 21 +
.../411-mtd-cfi_cmdset_0002-force-word-write.patch | 61 +
...412-mtd-m25p80-zero-partition-parser-data.patch | 10 +
.../patches-3.14/413-mtd-ar934x-nand-driver.patch | 25 +
.../patches-3.14/414-mtd-rb91x-nand-driver.patch | 23 +
.../patches-3.14/420-net-ar71xx_mac_driver.patch | 28 +
.../422-dsa-trailer-tag-validation-fix.patch | 11 +
.../patches-3.14/423-dsa-add-88e6063-driver.patch | 24 +
...-net-phy-add-phy_mmd_read_write-functions.patch | 40 +
...t-phy-at803x-allow-to-configure-via-pdata.patch | 134 ++
.../430-drivers-link-spi-before-mtd.patch | 12 +
.../patches-3.14/431-spi-add-various-flags.patch | 19 +
.../patches-3.14/432-spi-rb4xx-spi-driver.patch | 25 +
.../patches-3.14/433-spi-rb4xx-cpld-driver.patch | 26 +
.../patches-3.14/434-spi-ap83_spi_controller.patch | 27 +
.../patches-3.14/435-spi-vsc7385_driver.patch | 23 +
.../440-leds-wndr3700-usb-led-driver.patch | 26 +
.../patches-3.14/441-leds-rb750-led-driver.patch | 23 +
.../450-gpio-nxp-74hc153-gpio-chip-driver.patch | 25 +
...io-74x164-improve-platform-device-support.patch | 74 +
.../452-gpio-add-gpio-latch-driver.patch | 22 +
.../460-spi-bitbang-export-spi_bitbang_bufs.patch | 28 +
.../461-spi-add-type-field-to-spi_transfer.patch | 23 +
.../462-mtd-m25p80-set-spi-transfer-type.patch | 15 +
.../463-spi-ath79-add-fast-flash-read.patch | 185 +++
...MIPS-ath79-swizzle-pci-address-for-ar71xx.patch | 111 ++
.../480-ar913x_wmac_external_reset.patch | 31 +
.../490-usb-ehci-add-quirks-for-qca-socs.patch | 101 ++
.../ar71xx/patches-3.14/500-MIPS-fw-myloader.patch | 22 +
...9-add-mac-argument-to-ath79_register_wmac.patch | 81 ++
.../502-MIPS-ath79-export-ath79_gpio_base.patch | 23 +
.../503-MIPS-ath79-add-flash-acquire-release.patch | 37 +
...504-MIPS-ath79-add-ath79_device_reset_get.patch | 45 +
...MIPS-ath79-add-ath79_gpio_function_select.patch | 47 +
.../506-MIPS-ath79-prom-parse-redboot-args.patch | 86 ++
.../507-MIPS-ath79-prom-add-myloader-support.patch | 58 +
...8-MIPS-ath79-prom-image-command-line-hack.patch | 57 +
...09-MIPS-ath79-process-board-kernel-option.patch | 11 +
...0-MIPS-ath79-init-gpio-pin-of-wmac-device.patch | 14 +
.../520-MIPS-ath79-enable-UART-function.patch | 18 +
...1-MIPS-ath79-enable-UART-for-early_serial.patch | 61 +
...h79-add-ath79_wmac_register_simple-helper.patch | 21 +
.../patches-3.14/523-MIPS-ath79-OTP-support.patch | 166 +++
...th79-add-ath79_wmac_disable_25ghz-helpers.patch | 31 +
.../525-MIPS-ath79-enable-qca-usb-quirks.patch | 101 ++
.../601-MIPS-ath79-add-more-register-defines.patch | 358 +++++
.../602-MIPS-ath79-add-openwrt-stuff.patch | 76 +
.../patches-3.14/603-MIPS-ath79-ap121-fixes.patch | 163 +++
.../patches-3.14/604-MIPS-ath79-ap81-fixes.patch | 128 ++
.../patches-3.14/605-MIPS-ath79-db120-fixes.patch | 209 +++
.../patches-3.14/606-MIPS-ath79-pb44-fixes.patch | 153 ++
.../607-MIPS-ath79-ubnt-xm-fixes.patch | 109 ++
.../608-MIPS-ath79-ubnt-xm-add-more-boards.patch | 347 +++++
.../patches-3.14/609-MIPS-ath79-ap136-fixes.patch | 317 +++++
.../610-MIPS-ath79-openwrt-machines.patch | 1167 +++++++++++++++
.../patches-3.14/611-MIPS-ath79-wdt-timeout.patch | 25 +
.../612-MIPS-ath79-set-buffalo-txgain.patch | 24 +
...-add-ath79_wmac_setup_ext_lna_gpio-helper.patch | 76 +
...614-MIPS-ath79-ap81-remove-mtd-partitions.patch | 49 +
...615-MIPS-ath79-ap83-remove-mtd-partitions.patch | 44 +
.../patches-3.14/616-MIPS-ath79-ubnt-xw.patch | 73 +
.../700-MIPS-ath79-add-TL-WA801NDv2-suport.patch | 10 +
.../701-MIPS-ath79-add-TL-WA901ND-v3-support.patch | 10 +
.../702-MIPS-ath79-add-MyNet-N750-support.patch | 39 +
.../703-MIPS-ath79-add-RB91x-support.patch | 39 +
.../704-MIPS-ath79-TL-WDR4900v2-support.patch | 23 +
.../705-MIPS-ath79-add-RB951Ui-2HnD-support.patch | 10 +
.../706-MIPS-ath79-oolite-v1-support.patch | 39 +
...07-MIPS-ath79-add-support-for-QCA953x-SoC.patch | 426 ++++++
.../708-MIPS-ath79-TL-WR841v9-support.patch | 38 +
.../709-MIPS-ath79-HiWiFi-HC6361-support.patch | 39 +
.../patches-3.14/709-MIPS-ath79-add-NBG6716.patch | 37 +
.../patches-3.14/710-MIPS-ath79-add-OM2Pv2.patch | 10 +
.../711-MIPS-ath79-add-OM2P-HSv2.patch | 10 +
.../712-MIPS-ath79-add-EasyLink-support.patch | 51 +
.../713-MIPS-ath79-add-RBSXTLite-support.patch | 38 +
.../714-MIPS-ath79-add-TL-WA830REv2-support.patch | 39 +
.../715-MIPS-ath79-add-TL-WA860RE-support.patch | 10 +
.../716-MIPS-ath79-add_mikrotik_rb2011uias.patch | 26 +
.../717-MIPS-ath79-add-gl-inet-v1-support.patch | 39 +
.../718-MIPS-ath79-add-ESR1750-support.patch | 39 +
.../901-mdio_bitbang_ignore_ta_value.patch | 20 +
.../patches-3.14/902-unaligned_access_hacks.patch | 920 ++++++++++++
247 files changed, 36921 insertions(+)
create mode 100644 target/linux/ar71xx/config-3.14
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-ap96.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-nx.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0258n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0315n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap113.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap132.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap83.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap96.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-archer-c7.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-aw-nr580.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-bhu-bxu2000n2-a.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-cap4200ag.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-carambola2.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-505-a1.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-600-a1.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-615-c1.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-b1.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-c1.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dragino2.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-eap7660d.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-m150.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-mini.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-esr1750.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ew-dorin.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gl-inet.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gs-oolite.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hiwifi-hc6361.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hornet-ub.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ja76pf.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-jwap003.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mr600.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n600.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n750.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-rext.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w04nu.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w300nh.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg460n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg6716.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-om2p.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb42.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb92.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb2011.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb4xx.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb750.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb91x.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb95x.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rbsxtlite.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rw2458n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-632brp.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-673gru.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-712br.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-732br.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr11u.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr13u.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3020.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3x20.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa830re-v2.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd-v2.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wax50re.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr3500.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr4300.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1041n-v2.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd-v2.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr2543n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr703n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr720n-v3.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd-v4.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v8.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v9.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr941nd.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ubnt.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-whr-hp-g300n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlae-ag300n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlr8100.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndap360.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr3700.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr4300.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000-v3.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2200.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wp543.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wpe72.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt160nl.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt400n.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-ag300h.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh2.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g450h.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-zcn-1523h.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.c
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/include/asm/fw/myloader/myloader.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/mach-rb750.h
create mode 100644 target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
create mode 100644 target/linux/ar71xx/files-3.14/drivers/gpio/gpio-latch.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/gpio/gpio-nxp-74hc153.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/leds/leds-rb750.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/leds/leds-wndr3700-usb.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/mtd/nand/ar934x_nfc.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb4xx_nand.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb750_nand.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb91x_nand.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/mtd/tplinkpart.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/mtd/wrt160nl_part.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/dsa/mv88e6063.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Kconfig
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Makefile
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx.h
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/spi/spi-ap83.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx-cpld.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx.c
create mode 100644 target/linux/ar71xx/files-3.14/drivers/spi/spi-vsc7385.c
create mode 100644 target/linux/ar71xx/files-3.14/include/linux/nxp_74hc153.h
create mode 100644 target/linux/ar71xx/files-3.14/include/linux/platform/ar934x_nfc.h
create mode 100644 target/linux/ar71xx/files-3.14/include/linux/platform_data/gpio-latch.h
create mode 100644 target/linux/ar71xx/files-3.14/include/linux/platform_data/rb91x_nand.h
create mode 100644 target/linux/ar71xx/files-3.14/include/linux/spi/vsc7385.h
create mode 100644 target/linux/ar71xx/files-3.14/net/dsa/mv88e6063.c
create mode 100644 target/linux/ar71xx/patches-3.14/100-MIPS-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch
create mode 100644 target/linux/ar71xx/patches-3.14/101-MIPS-ath79-simplify-platform_get_resource_byname-dev.patch
create mode 100644 target/linux/ar71xx/patches-3.14/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch
create mode 100644 target/linux/ar71xx/patches-3.14/103-tty-ar933x_uart-convert-to-use-devm_-functions.patch
create mode 100644 target/linux/ar71xx/patches-3.14/104-watchdog-ath79-wdt-avoid-spurious-restarts-on-AR934x.patch
create mode 100644 target/linux/ar71xx/patches-3.14/206-spi-ath79-make-chipselect-logic-more-flexible.patch
create mode 100644 target/linux/ar71xx/patches-3.14/213-MIPS-ath79-fix-ar933x-wmac-reset.patch
create mode 100644 target/linux/ar71xx/patches-3.14/220-add_cpu_feature_overrides.patch
create mode 100644 target/linux/ar71xx/patches-3.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch
create mode 100644 target/linux/ar71xx/patches-3.14/310-lib-add-rle-decompression.patch
create mode 100644 target/linux/ar71xx/patches-3.14/401-mtd-physmap-add-lock-unlock.patch
create mode 100644 target/linux/ar71xx/patches-3.14/402-mtd-SST39VF6401B-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/403-mtd_fix_cfi_cmdset_0002_status_check.patch
create mode 100644 target/linux/ar71xx/patches-3.14/404-mtd-wrt160nl-trx-parser.patch
create mode 100644 target/linux/ar71xx/patches-3.14/405-mtd-tp-link-partition-parser.patch
create mode 100644 target/linux/ar71xx/patches-3.14/406-mtd-m25p80-allow-to-specify-max-read-size.patch
create mode 100644 target/linux/ar71xx/patches-3.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
create mode 100644 target/linux/ar71xx/patches-3.14/408-mtd-redboot_partition_scan.patch
create mode 100644 target/linux/ar71xx/patches-3.14/409-mtd-rb4xx_nand_driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/410-mtd-rb750-nand-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/411-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ar71xx/patches-3.14/412-mtd-m25p80-zero-partition-parser-data.patch
create mode 100644 target/linux/ar71xx/patches-3.14/413-mtd-ar934x-nand-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/414-mtd-rb91x-nand-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/420-net-ar71xx_mac_driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/422-dsa-trailer-tag-validation-fix.patch
create mode 100644 target/linux/ar71xx/patches-3.14/423-dsa-add-88e6063-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/424-net-phy-add-phy_mmd_read_write-functions.patch
create mode 100644 target/linux/ar71xx/patches-3.14/425-net-phy-at803x-allow-to-configure-via-pdata.patch
create mode 100644 target/linux/ar71xx/patches-3.14/430-drivers-link-spi-before-mtd.patch
create mode 100644 target/linux/ar71xx/patches-3.14/431-spi-add-various-flags.patch
create mode 100644 target/linux/ar71xx/patches-3.14/432-spi-rb4xx-spi-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/433-spi-rb4xx-cpld-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/434-spi-ap83_spi_controller.patch
create mode 100644 target/linux/ar71xx/patches-3.14/435-spi-vsc7385_driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/440-leds-wndr3700-usb-led-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/441-leds-rb750-led-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/451-gpio-74x164-improve-platform-device-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/452-gpio-add-gpio-latch-driver.patch
create mode 100644 target/linux/ar71xx/patches-3.14/460-spi-bitbang-export-spi_bitbang_bufs.patch
create mode 100644 target/linux/ar71xx/patches-3.14/461-spi-add-type-field-to-spi_transfer.patch
create mode 100644 target/linux/ar71xx/patches-3.14/462-mtd-m25p80-set-spi-transfer-type.patch
create mode 100644 target/linux/ar71xx/patches-3.14/463-spi-ath79-add-fast-flash-read.patch
create mode 100644 target/linux/ar71xx/patches-3.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
create mode 100644 target/linux/ar71xx/patches-3.14/480-ar913x_wmac_external_reset.patch
create mode 100644 target/linux/ar71xx/patches-3.14/490-usb-ehci-add-quirks-for-qca-socs.patch
create mode 100644 target/linux/ar71xx/patches-3.14/500-MIPS-fw-myloader.patch
create mode 100644 target/linux/ar71xx/patches-3.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
create mode 100644 target/linux/ar71xx/patches-3.14/502-MIPS-ath79-export-ath79_gpio_base.patch
create mode 100644 target/linux/ar71xx/patches-3.14/503-MIPS-ath79-add-flash-acquire-release.patch
create mode 100644 target/linux/ar71xx/patches-3.14/504-MIPS-ath79-add-ath79_device_reset_get.patch
create mode 100644 target/linux/ar71xx/patches-3.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch
create mode 100644 target/linux/ar71xx/patches-3.14/506-MIPS-ath79-prom-parse-redboot-args.patch
create mode 100644 target/linux/ar71xx/patches-3.14/507-MIPS-ath79-prom-add-myloader-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/508-MIPS-ath79-prom-image-command-line-hack.patch
create mode 100644 target/linux/ar71xx/patches-3.14/509-MIPS-ath79-process-board-kernel-option.patch
create mode 100644 target/linux/ar71xx/patches-3.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
create mode 100644 target/linux/ar71xx/patches-3.14/520-MIPS-ath79-enable-UART-function.patch
create mode 100644 target/linux/ar71xx/patches-3.14/521-MIPS-ath79-enable-UART-for-early_serial.patch
create mode 100644 target/linux/ar71xx/patches-3.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
create mode 100644 target/linux/ar71xx/patches-3.14/523-MIPS-ath79-OTP-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
create mode 100644 target/linux/ar71xx/patches-3.14/525-MIPS-ath79-enable-qca-usb-quirks.patch
create mode 100644 target/linux/ar71xx/patches-3.14/601-MIPS-ath79-add-more-register-defines.patch
create mode 100644 target/linux/ar71xx/patches-3.14/602-MIPS-ath79-add-openwrt-stuff.patch
create mode 100644 target/linux/ar71xx/patches-3.14/603-MIPS-ath79-ap121-fixes.patch
create mode 100644 target/linux/ar71xx/patches-3.14/604-MIPS-ath79-ap81-fixes.patch
create mode 100644 target/linux/ar71xx/patches-3.14/605-MIPS-ath79-db120-fixes.patch
create mode 100644 target/linux/ar71xx/patches-3.14/606-MIPS-ath79-pb44-fixes.patch
create mode 100644 target/linux/ar71xx/patches-3.14/607-MIPS-ath79-ubnt-xm-fixes.patch
create mode 100644 target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
create mode 100644 target/linux/ar71xx/patches-3.14/609-MIPS-ath79-ap136-fixes.patch
create mode 100644 target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch
create mode 100644 target/linux/ar71xx/patches-3.14/611-MIPS-ath79-wdt-timeout.patch
create mode 100644 target/linux/ar71xx/patches-3.14/612-MIPS-ath79-set-buffalo-txgain.patch
create mode 100644 target/linux/ar71xx/patches-3.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch
create mode 100644 target/linux/ar71xx/patches-3.14/614-MIPS-ath79-ap81-remove-mtd-partitions.patch
create mode 100644 target/linux/ar71xx/patches-3.14/615-MIPS-ath79-ap83-remove-mtd-partitions.patch
create mode 100644 target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch
create mode 100644 target/linux/ar71xx/patches-3.14/700-MIPS-ath79-add-TL-WA801NDv2-suport.patch
create mode 100644 target/linux/ar71xx/patches-3.14/701-MIPS-ath79-add-TL-WA901ND-v3-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/702-MIPS-ath79-add-MyNet-N750-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/703-MIPS-ath79-add-RB91x-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/704-MIPS-ath79-TL-WDR4900v2-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/705-MIPS-ath79-add-RB951Ui-2HnD-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/706-MIPS-ath79-oolite-v1-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch
create mode 100644 target/linux/ar71xx/patches-3.14/708-MIPS-ath79-TL-WR841v9-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/709-MIPS-ath79-HiWiFi-HC6361-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/709-MIPS-ath79-add-NBG6716.patch
create mode 100644 target/linux/ar71xx/patches-3.14/710-MIPS-ath79-add-OM2Pv2.patch
create mode 100644 target/linux/ar71xx/patches-3.14/711-MIPS-ath79-add-OM2P-HSv2.patch
create mode 100644 target/linux/ar71xx/patches-3.14/712-MIPS-ath79-add-EasyLink-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/713-MIPS-ath79-add-RBSXTLite-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/714-MIPS-ath79-add-TL-WA830REv2-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/715-MIPS-ath79-add-TL-WA860RE-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/716-MIPS-ath79-add_mikrotik_rb2011uias.patch
create mode 100644 target/linux/ar71xx/patches-3.14/717-MIPS-ath79-add-gl-inet-v1-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/718-MIPS-ath79-add-ESR1750-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/901-mdio_bitbang_ignore_ta_value.patch
create mode 100644 target/linux/ar71xx/patches-3.14/902-unaligned_access_hacks.patch

diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14
new file mode 100644
index 0000000..aa5eb7e
--- /dev/null
+++ b/target/linux/ar71xx/config-3.14
@@ -0,0 +1,292 @@
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_AR8216_PHY_LEDS=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ATH79=y
+CONFIG_ATH79_DEV_AP9X_PCI=y
+CONFIG_ATH79_DEV_DSA=y
+CONFIG_ATH79_DEV_ETH=y
+CONFIG_ATH79_DEV_GPIO_BUTTONS=y
+CONFIG_ATH79_DEV_LEDS_GPIO=y
+CONFIG_ATH79_DEV_M25P80=y
+CONFIG_ATH79_DEV_NFC=y
+CONFIG_ATH79_DEV_SPI=y
+CONFIG_ATH79_DEV_USB=y
+CONFIG_ATH79_DEV_WMAC=y
+CONFIG_ATH79_MACH_ALFA_AP96=y
+CONFIG_ATH79_MACH_ALFA_NX=y
+CONFIG_ATH79_MACH_ALL0258N=y
+CONFIG_ATH79_MACH_ALL0315N=y
+CONFIG_ATH79_MACH_AP113=y
+CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP132=y
+CONFIG_ATH79_MACH_AP136=y
+CONFIG_ATH79_MACH_AP81=y
+CONFIG_ATH79_MACH_AP83=y
+CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C7=y
+CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
+CONFIG_ATH79_MACH_CAP4200AG=y
+CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DIR_505_A1=y
+CONFIG_ATH79_MACH_DIR_600_A1=y
+CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_825_B1=y
+CONFIG_ATH79_MACH_DIR_825_C1=y
+CONFIG_ATH79_MACH_DRAGINO2=y
+CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_EL_M150=y
+CONFIG_ATH79_MACH_EL_MINI=y
+CONFIG_ATH79_MACH_ESR1750=y
+CONFIG_ATH79_MACH_EW_DORIN=y
+CONFIG_ATH79_MACH_GL_INET=y
+CONFIG_ATH79_MACH_GS_OOLITE=y
+CONFIG_ATH79_MACH_HIWIFI_HC6361=y
+CONFIG_ATH79_MACH_HORNET_UB=y
+CONFIG_ATH79_MACH_JA76PF=y
+CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_MR600=y
+CONFIG_ATH79_MACH_MYNET_N600=y
+CONFIG_ATH79_MACH_MYNET_N750=y
+CONFIG_ATH79_MACH_MYNET_REXT=y
+CONFIG_ATH79_MACH_MZK_W04NU=y
+CONFIG_ATH79_MACH_MZK_W300NH=y
+CONFIG_ATH79_MACH_NBG460N=y
+CONFIG_ATH79_MACH_NBG6716=y
+CONFIG_ATH79_MACH_OM2P=y
+CONFIG_ATH79_MACH_PB42=y
+CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PB92=y
+# CONFIG_ATH79_MACH_RB2011 is not set
+# CONFIG_ATH79_MACH_RB4XX is not set
+# CONFIG_ATH79_MACH_RB750 is not set
+# CONFIG_ATH79_MACH_RB91X is not set
+# CONFIG_ATH79_MACH_RB95X is not set
+# CONFIG_ATH79_MACH_RBSXTLITE is not set
+CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_TEW_632BRP=y
+CONFIG_ATH79_MACH_TEW_673GRU=y
+CONFIG_ATH79_MACH_TEW_712BR=y
+CONFIG_ATH79_MACH_TEW_732BR=y
+CONFIG_ATH79_MACH_TL_MR11U=y
+CONFIG_ATH79_MACH_TL_MR13U=y
+CONFIG_ATH79_MACH_TL_MR3020=y
+CONFIG_ATH79_MACH_TL_MR3X20=y
+CONFIG_ATH79_MACH_TL_WA830RE_V2=y
+CONFIG_ATH79_MACH_TL_WA901ND=y
+CONFIG_ATH79_MACH_TL_WA901ND_V2=y
+CONFIG_ATH79_MACH_TL_WAX50RE=y
+CONFIG_ATH79_MACH_TL_WDR3500=y
+CONFIG_ATH79_MACH_TL_WDR4300=y
+CONFIG_ATH79_MACH_TL_WR1041N_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND=y
+CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
+CONFIG_ATH79_MACH_TL_WR2543N=y
+CONFIG_ATH79_MACH_TL_WR703N=y
+CONFIG_ATH79_MACH_TL_WR720N_V3=y
+CONFIG_ATH79_MACH_TL_WR741ND=y
+CONFIG_ATH79_MACH_TL_WR741ND_V4=y
+CONFIG_ATH79_MACH_TL_WR841N_V1=y
+CONFIG_ATH79_MACH_TL_WR841N_V8=y
+CONFIG_ATH79_MACH_TL_WR841N_V9=y
+CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_UBNT=y
+CONFIG_ATH79_MACH_UBNT_XM=y
+CONFIG_ATH79_MACH_WHR_HP_G300N=y
+CONFIG_ATH79_MACH_WLAE_AG300N=y
+CONFIG_ATH79_MACH_WLR8100=y
+CONFIG_ATH79_MACH_WNDAP360=y
+CONFIG_ATH79_MACH_WNDR3700=y
+CONFIG_ATH79_MACH_WNDR4300=y
+CONFIG_ATH79_MACH_WNR2000=y
+CONFIG_ATH79_MACH_WNR2000_V3=y
+CONFIG_ATH79_MACH_WNR2200=y
+CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPE72=y
+CONFIG_ATH79_MACH_WRT160NL=y
+CONFIG_ATH79_MACH_WRT400N=y
+CONFIG_ATH79_MACH_WZR_HP_AG300H=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
+CONFIG_ATH79_MACH_WZR_HP_G450H=y
+CONFIG_ATH79_MACH_ZCN_1523H=y
+CONFIG_ATH79_NVRAM=y
+CONFIG_ATH79_PCI_ATH9K_FIXUP=y
+# CONFIG_ATH79_ROUTERBOOT is not set
+CONFIG_ATH79_WDT=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+# CONFIG_GPIO_LATCH is not set
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_WNDR3700_USB is not set
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_LZMA_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_MTD_WRT160NL_PARTS=y
+CONFIG_MYLOADER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_AR71XX=y
+CONFIG_SOC_AR724X=y
+CONFIG_SOC_AR913X=y
+CONFIG_SOC_AR933X=y
+CONFIG_SOC_AR934X=y
+CONFIG_SOC_QCA953X=y
+CONFIG_SOC_QCA955X=y
+CONFIG_SPI=y
+CONFIG_SPI_AP83=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_VSC7385 is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.c
new file mode 100644
index 0000000..d382453
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.c
@@ -0,0 +1,159 @@
+/*
+ * Atheros AP9X reference board PCI initialization
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "pci-ath9k-fixup.h"
+#include "pci.h"
+
+static struct ath9k_platform_data ap9x_wmac0_data = {
+ .led_pin = -1,
+};
+static struct ath9k_platform_data ap9x_wmac1_data = {
+ .led_pin = -1,
+};
+static char ap9x_wmac0_mac[6];
+static char ap9x_wmac1_mac[6];
+
+__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.led_pin = pin;
+ break;
+ case 1:
+ ap9x_wmac1_data.led_pin = pin;
+ break;
+ }
+}
+
+__init struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
+{
+ switch (wmac) {
+ case 0:
+ return &ap9x_wmac0_data;
+
+ case 1:
+ return &ap9x_wmac1_data;
+ }
+
+ return NULL;
+}
+
+__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.gpio_mask = mask;
+ ap9x_wmac0_data.gpio_val = val;
+ break;
+ case 1:
+ ap9x_wmac1_data.gpio_mask = mask;
+ ap9x_wmac1_data.gpio_val = val;
+ break;
+ }
+}
+
+__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
+ int num_leds)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.leds = leds;
+ ap9x_wmac0_data.num_leds = num_leds;
+ break;
+ case 1:
+ ap9x_wmac1_data.leds = leds;
+ ap9x_wmac1_data.num_leds = num_leds;
+ break;
+ }
+}
+
+static int ap91_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0:
+ dev->dev.platform_data = &ap9x_wmac0_data;
+ break;
+ }
+
+ return 0;
+}
+
+__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr)
+{
+ if (cal_data)
+ memcpy(ap9x_wmac0_data.eeprom_data, cal_data,
+ sizeof(ap9x_wmac0_data.eeprom_data));
+
+ if (mac_addr) {
+ memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac));
+ ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init);
+ ath79_register_pci();
+
+ pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data);
+}
+
+__init void ap91_pci_init_simple(void)
+{
+ ap91_pci_init(NULL, NULL);
+ ap9x_wmac0_data.eeprom_name = "pci_wmac0.eeprom";
+}
+
+static int ap94_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 17:
+ dev->dev.platform_data = &ap9x_wmac0_data;
+ break;
+
+ case 18:
+ dev->dev.platform_data = &ap9x_wmac1_data;
+ break;
+ }
+
+ return 0;
+}
+
+__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+ if (cal_data0)
+ memcpy(ap9x_wmac0_data.eeprom_data, cal_data0,
+ sizeof(ap9x_wmac0_data.eeprom_data));
+
+ if (cal_data1)
+ memcpy(ap9x_wmac1_data.eeprom_data, cal_data1,
+ sizeof(ap9x_wmac1_data.eeprom_data));
+
+ if (mac_addr0) {
+ memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac));
+ ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
+ }
+
+ if (mac_addr1) {
+ memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac));
+ ap9x_wmac1_data.macaddr = ap9x_wmac1_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init);
+ ath79_register_pci();
+
+ pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data);
+ pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data);
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.h
new file mode 100644
index 0000000..ad288cb
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-ap9x-pci.h
@@ -0,0 +1,48 @@
+/*
+ * Atheros AP9X reference board PCI initialization
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_AP9X_PCI_H
+#define _ATH79_DEV_AP9X_PCI_H
+
+struct gpio_led;
+struct ath9k_platform_data;
+
+#if defined(CONFIG_ATH79_DEV_AP9X_PCI)
+void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
+void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
+void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
+ int num_leds);
+struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac);
+
+void ap91_pci_init(u8 *cal_data, u8 *mac_addr);
+void ap91_pci_init_simple(void);
+void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1);
+
+#else
+static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {}
+static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
+ u32 mask, u32 val) {}
+static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
+ struct gpio_led *leds,
+ int num_leds) {}
+static inline struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
+{
+ return NULL;
+}
+
+static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {}
+static inline void ap91_pci_init_simple(void) {}
+static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1) {}
+#endif
+
+#endif /* _ATH79_DEV_AP9X_PCI_H */
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.c
new file mode 100644
index 0000000..1764147
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.c
@@ -0,0 +1,36 @@
+/*
+ * Atheros AR71xx DSA switch device support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+
+static struct platform_device ar71xx_dsa_switch_device = {
+ .name = "dsa",
+ .id = 0,
+};
+
+void __init ath79_register_dsa(struct device *netdev,
+ struct device *miidev,
+ struct dsa_platform_data *d)
+{
+ int i;
+
+ d->netdev = netdev;
+ for (i = 0; i < d->nr_chips; i++)
+ d->chip[i].mii_bus = miidev;
+
+ ar71xx_dsa_switch_device.dev.platform_data = d;
+ platform_device_register(&ar71xx_dsa_switch_device);
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.h
new file mode 100644
index 0000000..3730202
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-dsa.h
@@ -0,0 +1,21 @@
+/*
+ * Atheros AR71xx DSA switch device support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_DSA_H
+#define _ATH79_DEV_DSA_H
+
+#include <net/dsa.h>
+
+void ath79_register_dsa(struct device *netdev,
+ struct device *miidev,
+ struct dsa_platform_data *d);
+
+#endif /* _ATH79_DEV_DSA_H */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.c
new file mode 100644
index 0000000..227f16e
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.c
@@ -0,0 +1,1209 @@
+/*
+ * Atheros AR71xx SoC platform devices
+ *
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <***@atheros.com>
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * Parts of this file are based on Atheros 2.6.15 BSP
+ * Parts of this file are based on Atheros 2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/sizes.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/irq.h>
+
+#include "common.h"
+#include "dev-eth.h"
+
+unsigned char ath79_mac_base[ETH_ALEN] __initdata;
+
+static struct resource ath79_mdio0_resources[] = {
+ {
+ .name = "mdio_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE0_BASE,
+ .end = AR71XX_GE0_BASE + 0x200 - 1,
+ }
+};
+
+struct ag71xx_mdio_platform_data ath79_mdio0_data;
+
+struct platform_device ath79_mdio0_device = {
+ .name = "ag71xx-mdio",
+ .id = 0,
+ .resource = ath79_mdio0_resources,
+ .num_resources = ARRAY_SIZE(ath79_mdio0_resources),
+ .dev = {
+ .platform_data = &ath79_mdio0_data,
+ },
+};
+
+static struct resource ath79_mdio1_resources[] = {
+ {
+ .name = "mdio_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE1_BASE,
+ .end = AR71XX_GE1_BASE + 0x200 - 1,
+ }
+};
+
+struct ag71xx_mdio_platform_data ath79_mdio1_data;
+
+struct platform_device ath79_mdio1_device = {
+ .name = "ag71xx-mdio",
+ .id = 1,
+ .resource = ath79_mdio1_resources,
+ .num_resources = ARRAY_SIZE(ath79_mdio1_resources),
+ .dev = {
+ .platform_data = &ath79_mdio1_data,
+ },
+};
+
+static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+
+ t = __raw_readl(base + cfg_reg);
+ t &= ~(3 << shift);
+ t |= (2 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ __raw_writel(pll_val, base + pll_reg);
+
+ t |= (3 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ t &= ~(3 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
+ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
+
+ iounmap(base);
+}
+
+static void __init ath79_mii_ctrl_set_if(unsigned int reg,
+ unsigned int mii_if)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
+
+ t = __raw_readl(base + reg);
+ t &= ~(AR71XX_MII_CTRL_IF_MASK);
+ t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
+ __raw_writel(t, base + reg);
+
+ iounmap(base);
+}
+
+static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
+{
+ void __iomem *base;
+ unsigned int mii_speed;
+ u32 t;
+
+ switch (speed) {
+ case SPEED_10:
+ mii_speed = AR71XX_MII_CTRL_SPEED_10;
+ break;
+ case SPEED_100:
+ mii_speed = AR71XX_MII_CTRL_SPEED_100;
+ break;
+ case SPEED_1000:
+ mii_speed = AR71XX_MII_CTRL_SPEED_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
+
+ t = __raw_readl(base + reg);
+ t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
+ t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT;
+ __raw_writel(t, base + reg);
+
+ iounmap(base);
+}
+
+static unsigned long ar934x_get_mdio_ref_clock(void)
+{
+ void __iomem *base;
+ unsigned long ret;
+ u32 t;
+
+ base = ioremap(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+
+ ret = 0;
+ t = __raw_readl(base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
+ if (t & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) {
+ ret = 100 * 1000 * 1000;
+ } else {
+ struct clk *clk;
+
+ clk = clk_get(NULL, "ref");
+ if (!IS_ERR(clk))
+ ret = clk_get_rate(clk);
+ }
+
+ iounmap(base);
+
+ return ret;
+}
+
+void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
+{
+ struct platform_device *mdio_dev;
+ struct ag71xx_mdio_platform_data *mdio_data;
+ unsigned int max_id;
+
+ if (ath79_soc == ATH79_SOC_AR9341 ||
+ ath79_soc == ATH79_SOC_AR9342 ||
+ ath79_soc == ATH79_SOC_AR9344 ||
+ ath79_soc == ATH79_SOC_QCA9556 ||
+ ath79_soc == ATH79_SOC_QCA9558)
+ max_id = 1;
+ else
+ max_id = 0;
+
+ if (id > max_id) {
+ printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
+ return;
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
+ mdio_dev = &ath79_mdio1_device;
+ mdio_data = &ath79_mdio1_data;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+ if (id == 0) {
+ mdio_dev = &ath79_mdio0_device;
+ mdio_data = &ath79_mdio0_data;
+ } else {
+ mdio_dev = &ath79_mdio1_device;
+ mdio_data = &ath79_mdio1_data;
+ }
+ break;
+
+ case ATH79_SOC_AR7242:
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
+ AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
+ AR71XX_ETH0_PLL_SHIFT);
+ /* fall through */
+ default:
+ mdio_dev = &ath79_mdio0_device;
+ mdio_data = &ath79_mdio0_data;
+ break;
+ }
+
+ mdio_data->phy_mask = phy_mask;
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7240:
+ mdio_data->is_ar7240 = 1;
+ /* fall through */
+ case ATH79_SOC_AR7241:
+ mdio_data->builtin_switch = 1;
+ break;
+
+ case ATH79_SOC_AR9330:
+ mdio_data->is_ar9330 = 1;
+ /* fall through */
+ case ATH79_SOC_AR9331:
+ mdio_data->builtin_switch = 1;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 1) {
+ mdio_data->builtin_switch = 1;
+ mdio_data->ref_clock = ar934x_get_mdio_ref_clock();
+ mdio_data->mdio_clock = 6250000;
+ }
+ mdio_data->is_ar934x = 1;
+ break;
+
+ case ATH79_SOC_QCA9533:
+ mdio_data->builtin_switch = 1;
+ break;
+
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+ mdio_data->is_ar934x = 1;
+ break;
+
+ default:
+ break;
+ }
+
+ platform_device_register(mdio_dev);
+}
+
+struct ath79_eth_pll_data ath79_eth0_pll_data;
+struct ath79_eth_pll_data ath79_eth1_pll_data;
+
+static u32 ath79_get_eth_pll(unsigned int mac, int speed)
+{
+ struct ath79_eth_pll_data *pll_data;
+ u32 pll_val;
+
+ switch (mac) {
+ case 0:
+ pll_data = &ath79_eth0_pll_data;
+ break;
+ case 1:
+ pll_data = &ath79_eth1_pll_data;
+ break;
+ default:
+ BUG();
+ }
+
+ switch (speed) {
+ case SPEED_10:
+ pll_val = pll_data->pll_10;
+ break;
+ case SPEED_100:
+ pll_val = pll_data->pll_100;
+ break;
+ case SPEED_1000:
+ pll_val = pll_data->pll_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ return pll_val;
+}
+
+static void ath79_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
+ val, AR71XX_ETH0_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
+}
+
+static void ath79_set_speed_ge1(int speed)
+{
+ u32 val = ath79_get_eth_pll(1, speed);
+
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
+ val, AR71XX_ETH1_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
+}
+
+static void ar7242_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+ void __iomem *base;
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+ __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
+ iounmap(base);
+}
+
+static void ar91xx_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
+ val, AR913X_ETH0_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
+}
+
+static void ar91xx_set_speed_ge1(int speed)
+{
+ u32 val = ath79_get_eth_pll(1, speed);
+
+ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
+ val, AR913X_ETH1_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
+}
+
+static void ar934x_set_speed_ge0(int speed)
+{
+ void __iomem *base;
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+ __raw_writel(val, base + AR934X_PLL_ETH_XMII_CONTROL_REG);
+ iounmap(base);
+}
+
+static void qca955x_set_speed_xmii(int speed)
+{
+ void __iomem *base;
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+ __raw_writel(val, base + QCA955X_PLL_ETH_XMII_CONTROL_REG);
+ iounmap(base);
+}
+
+static void qca955x_set_speed_sgmii(int speed)
+{
+ void __iomem *base;
+ u32 val = ath79_get_eth_pll(1, speed);
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+ __raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG);
+ iounmap(base);
+}
+
+static void ath79_set_speed_dummy(int speed)
+{
+}
+
+static void ath79_ddr_no_flush(void)
+{
+}
+
+static void ath79_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
+}
+
+static void ath79_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1);
+}
+
+static void ar724x_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar724x_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar91xx_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar91xx_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar933x_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar933x_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
+}
+
+static struct resource ath79_eth0_resources[] = {
+ {
+ .name = "mac_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE0_BASE,
+ .end = AR71XX_GE0_BASE + 0x200 - 1,
+ }, {
+ .name = "mac_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = ATH79_CPU_IRQ(4),
+ .end = ATH79_CPU_IRQ(4),
+ },
+};
+
+struct ag71xx_platform_data ath79_eth0_data = {
+ .reset_bit = AR71XX_RESET_GE0_MAC,
+};
+
+struct platform_device ath79_eth0_device = {
+ .name = "ag71xx",
+ .id = 0,
+ .resource = ath79_eth0_resources,
+ .num_resources = ARRAY_SIZE(ath79_eth0_resources),
+ .dev = {
+ .platform_data = &ath79_eth0_data,
+ },
+};
+
+static struct resource ath79_eth1_resources[] = {
+ {
+ .name = "mac_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE1_BASE,
+ .end = AR71XX_GE1_BASE + 0x200 - 1,
+ }, {
+ .name = "mac_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = ATH79_CPU_IRQ(5),
+ .end = ATH79_CPU_IRQ(5),
+ },
+};
+
+struct ag71xx_platform_data ath79_eth1_data = {
+ .reset_bit = AR71XX_RESET_GE1_MAC,
+};
+
+struct platform_device ath79_eth1_device = {
+ .name = "ag71xx",
+ .id = 1,
+ .resource = ath79_eth1_resources,
+ .num_resources = ARRAY_SIZE(ath79_eth1_resources),
+ .dev = {
+ .platform_data = &ath79_eth1_data,
+ },
+};
+
+struct ag71xx_switch_platform_data ath79_switch_data;
+
+#define AR71XX_PLL_VAL_1000 0x00110000
+#define AR71XX_PLL_VAL_100 0x00001099
+#define AR71XX_PLL_VAL_10 0x00991099
+
+#define AR724X_PLL_VAL_1000 0x00110000
+#define AR724X_PLL_VAL_100 0x00001099
+#define AR724X_PLL_VAL_10 0x00991099
+
+#define AR7242_PLL_VAL_1000 0x16000000
+#define AR7242_PLL_VAL_100 0x00000101
+#define AR7242_PLL_VAL_10 0x00001616
+
+#define AR913X_PLL_VAL_1000 0x1a000000
+#define AR913X_PLL_VAL_100 0x13000a44
+#define AR913X_PLL_VAL_10 0x00441099
+
+#define AR933X_PLL_VAL_1000 0x00110000
+#define AR933X_PLL_VAL_100 0x00001099
+#define AR933X_PLL_VAL_10 0x00991099
+
+#define AR934X_PLL_VAL_1000 0x16000000
+#define AR934X_PLL_VAL_100 0x00000101
+#define AR934X_PLL_VAL_10 0x00001616
+
+static void __init ath79_init_eth_pll_data(unsigned int id)
+{
+ struct ath79_eth_pll_data *pll_data;
+ u32 pll_10, pll_100, pll_1000;
+
+ switch (id) {
+ case 0:
+ pll_data = &ath79_eth0_pll_data;
+ break;
+ case 1:
+ pll_data = &ath79_eth1_pll_data;
+ break;
+ default:
+ BUG();
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ pll_10 = AR71XX_PLL_VAL_10;
+ pll_100 = AR71XX_PLL_VAL_100;
+ pll_1000 = AR71XX_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ pll_10 = AR724X_PLL_VAL_10;
+ pll_100 = AR724X_PLL_VAL_100;
+ pll_1000 = AR724X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR7242:
+ pll_10 = AR7242_PLL_VAL_10;
+ pll_100 = AR7242_PLL_VAL_100;
+ pll_1000 = AR7242_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ pll_10 = AR913X_PLL_VAL_10;
+ pll_100 = AR913X_PLL_VAL_100;
+ pll_1000 = AR913X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pll_10 = AR933X_PLL_VAL_10;
+ pll_100 = AR933X_PLL_VAL_100;
+ pll_1000 = AR933X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9533:
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+ pll_10 = AR934X_PLL_VAL_10;
+ pll_100 = AR934X_PLL_VAL_100;
+ pll_1000 = AR934X_PLL_VAL_1000;
+ break;
+
+ default:
+ BUG();
+ }
+
+ if (!pll_data->pll_10)
+ pll_data->pll_10 = pll_10;
+
+ if (!pll_data->pll_100)
+ pll_data->pll_100 = pll_100;
+
+ if (!pll_data->pll_1000)
+ pll_data->pll_1000 = pll_1000;
+}
+
+static int __init ath79_setup_phy_if_mode(unsigned int id,
+ struct ag71xx_platform_data *pdata)
+{
+ unsigned int mii_if;
+
+ switch (id) {
+ case 0:
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ mii_if = AR71XX_MII0_CTRL_IF_MII;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ mii_if = AR71XX_MII0_CTRL_IF_GMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ mii_if = AR71XX_MII0_CTRL_IF_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ mii_if = AR71XX_MII0_CTRL_IF_RMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
+ pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
+ break;
+
+ case ATH79_SOC_AR7242:
+ /* FIXME */
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_SGMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ BUG();
+ }
+ break;
+ case 1:
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+ mii_if = AR71XX_MII1_CTRL_IF_RMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ mii_if = AR71XX_MII1_CTRL_IF_RGMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
+ pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ break;
+
+ case ATH79_SOC_AR7242:
+ /* FIXME */
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_SGMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ BUG();
+ }
+ break;
+ }
+
+ return 0;
+}
+
+void __init ath79_setup_ar933x_phy4_switch(bool mac, bool mdio)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
+ t &= ~(AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ if (mac)
+ t |= AR933X_ETH_CFG_SW_PHY_SWAP;
+ if (mdio)
+ t |= AR933X_ETH_CFG_SW_PHY_ADDR_SWAP;
+ __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+void __init ath79_setup_ar934x_eth_cfg(u32 mask)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+
+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_MII_GMAC0 |
+ AR934X_ETH_CFG_GMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE |
+ AR934X_ETH_CFG_SW_PHY_SWAP);
+
+ t |= mask;
+
+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+ /* flush write */
+ __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+void __init ath79_setup_qca955x_eth_cfg(u32 mask)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+
+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
+
+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
+
+ t |= mask;
+
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static int ath79_eth_instance __initdata;
+void __init ath79_register_eth(unsigned int id)
+{
+ struct platform_device *pdev;
+ struct ag71xx_platform_data *pdata;
+ int err;
+
+ if (id > 1) {
+ printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
+ return;
+ }
+
+ ath79_init_eth_pll_data(id);
+
+ if (id == 0)
+ pdev = &ath79_eth0_device;
+ else
+ pdev = &ath79_eth1_device;
+
+ pdata = pdev->dev.platform_data;
+
+ pdata->max_frame_len = 1540;
+ pdata->desc_pktlen_mask = 0xfff;
+
+ err = ath79_setup_phy_if_mode(id, pdata);
+ if (err) {
+ printk(KERN_ERR
+ "ar71xx: invalid PHY interface mode for GE%u\n", id);
+ return;
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ if (id == 0) {
+ pdata->ddr_flush = ath79_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ath79_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_ge1;
+ }
+ break;
+
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ if (id == 0) {
+ pdata->ddr_flush = ath79_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ath79_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_ge1;
+ }
+ pdata->has_gbit = 1;
+ break;
+
+ case ATH79_SOC_AR7242:
+ if (id == 0) {
+ pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
+ AR71XX_RESET_GE0_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge0;
+ pdata->set_speed = ar7242_set_speed_ge0;
+ } else {
+ pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
+ AR71XX_RESET_GE1_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_dummy;
+ }
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR7241:
+ if (id == 0)
+ pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
+ else
+ pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
+ /* fall through */
+ case ATH79_SOC_AR7240:
+ if (id == 0) {
+ pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ }
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+ if (ath79_soc == ATH79_SOC_AR7240)
+ pdata->is_ar7240 = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR9130:
+ if (id == 0) {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
+ pdata->set_speed = ar91xx_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
+ pdata->set_speed = ar91xx_set_speed_ge1;
+ }
+ pdata->is_ar91xx = 1;
+ break;
+
+ case ATH79_SOC_AR9132:
+ if (id == 0) {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
+ pdata->set_speed = ar91xx_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
+ pdata->set_speed = ar91xx_set_speed_ge1;
+ }
+ pdata->is_ar91xx = 1;
+ pdata->has_gbit = 1;
+ break;
+
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ if (id == 0) {
+ pdata->reset_bit = AR933X_RESET_GE0_MAC |
+ AR933X_RESET_GE0_MDIO;
+ pdata->ddr_flush = ar933x_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit = AR933X_RESET_GE1_MAC |
+ AR933X_RESET_GE1_MDIO;
+ pdata->ddr_flush = ar933x_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ }
+
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 0) {
+ pdata->reset_bit = AR934X_RESET_GE0_MAC |
+ AR934X_RESET_GE0_MDIO;
+ pdata->set_speed = ar934x_set_speed_ge0;
+ } else {
+ pdata->reset_bit = AR934X_RESET_GE1_MAC |
+ AR934X_RESET_GE1_MDIO;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->switch_data = &ath79_switch_data;
+
+ /* reset the built-in switch */
+ ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
+ ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);
+ }
+
+ pdata->ddr_flush = ath79_ddr_no_flush;
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ pdata->max_frame_len = SZ_16K - 1;
+ pdata->desc_pktlen_mask = SZ_16K - 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_QCA9533:
+ if (id == 0) {
+ pdata->reset_bit = AR933X_RESET_GE0_MAC |
+ AR933X_RESET_GE0_MDIO;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit = AR933X_RESET_GE1_MAC |
+ AR933X_RESET_GE1_MDIO;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ }
+
+ pdata->ddr_flush = ath79_ddr_no_flush;
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+ if (id == 0) {
+ pdata->reset_bit = QCA955X_RESET_GE0_MAC |
+ QCA955X_RESET_GE0_MDIO;
+ pdata->set_speed = qca955x_set_speed_xmii;
+ } else {
+ pdata->reset_bit = QCA955X_RESET_GE1_MAC |
+ QCA955X_RESET_GE1_MDIO;
+ pdata->set_speed = qca955x_set_speed_sgmii;
+ }
+
+ pdata->ddr_flush = ath79_ddr_no_flush;
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ /*
+ * Limit the maximum frame length to 4095 bytes.
+ * Although the documentation says that the hardware
+ * limit is 16383 bytes but that does not work in
+ * practice. It seems that the hardware only updates
+ * the lowest 12 bits of the packet length field
+ * in the RX descriptor.
+ */
+ pdata->max_frame_len = SZ_4K - 1;
+ pdata->desc_pktlen_mask = SZ_16K - 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ default:
+ BUG();
+ }
+
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_SGMII:
+ if (!pdata->has_gbit) {
+ printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
+ id);
+ return;
+ }
+ /* fallthrough */
+ default:
+ break;
+ }
+
+ if (!is_valid_ether_addr(pdata->mac_addr)) {
+ random_ether_addr(pdata->mac_addr);
+ printk(KERN_DEBUG
+ "ar71xx: using random MAC address for eth%d\n",
+ ath79_eth_instance);
+ }
+
+ if (pdata->mii_bus_dev == NULL) {
+ switch (ath79_soc) {
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 0)
+ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
+ else
+ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ break;
+
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
+ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ break;
+
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+ /* don't assign any MDIO device by default */
+ break;
+
+ default:
+ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
+ break;
+ }
+ }
+
+ /* Reset the device */
+ ath79_device_reset_set(pdata->reset_bit);
+ mdelay(100);
+
+ ath79_device_reset_clear(pdata->reset_bit);
+ mdelay(100);
+
+ platform_device_register(pdev);
+ ath79_eth_instance++;
+}
+
+void __init ath79_set_mac_base(unsigned char *mac)
+{
+ memcpy(ath79_mac_base, mac, ETH_ALEN);
+}
+
+void __init ath79_parse_ascii_mac(char *mac_str, u8 *mac)
+{
+ int t;
+
+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
+
+ if (t != ETH_ALEN)
+ t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
+ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
+
+ if (t != ETH_ALEN || !is_valid_ether_addr(mac)) {
+ memset(mac, 0, ETH_ALEN);
+ printk(KERN_DEBUG "ar71xx: invalid mac address \"%s\"\n",
+ mac_str);
+ }
+}
+
+static void __init ath79_set_mac_base_ascii(char *str)
+{
+ u8 mac[ETH_ALEN];
+
+ ath79_parse_ascii_mac(str, mac);
+ ath79_set_mac_base(mac);
+}
+
+static int __init ath79_ethaddr_setup(char *str)
+{
+ ath79_set_mac_base_ascii(str);
+ return 1;
+}
+__setup("ethaddr=", ath79_ethaddr_setup);
+
+static int __init ath79_kmac_setup(char *str)
+{
+ ath79_set_mac_base_ascii(str);
+ return 1;
+}
+__setup("kmac=", ath79_kmac_setup);
+
+void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
+ int offset)
+{
+ int t;
+
+ if (!dst)
+ return;
+
+ if (!src || !is_valid_ether_addr(src)) {
+ memset(dst, '\0', ETH_ALEN);
+ return;
+ }
+
+ t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
+ t += offset;
+
+ dst[0] = src[0];
+ dst[1] = src[1];
+ dst[2] = src[2];
+ dst[3] = (t >> 16) & 0xff;
+ dst[4] = (t >> 8) & 0xff;
+ dst[5] = t & 0xff;
+}
+
+void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
+{
+ int i;
+
+ if (!dst)
+ return;
+
+ if (!src || !is_valid_ether_addr(src)) {
+ memset(dst, '\0', ETH_ALEN);
+ return;
+ }
+
+ for (i = 0; i < ETH_ALEN; i++)
+ dst[i] = src[i];
+ dst[0] |= 0x02;
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.h
new file mode 100644
index 0000000..e1517b7
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-eth.h
@@ -0,0 +1,52 @@
+/*
+ * Atheros AR71xx SoC device definitions
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_ETH_H
+#define _ATH79_DEV_ETH_H
+
+#include <asm/mach-ath79/ag71xx_platform.h>
+
+struct platform_device;
+
+extern unsigned char ath79_mac_base[] __initdata;
+void ath79_parse_ascii_mac(char *mac_str, u8 *mac);
+void ath79_init_mac(unsigned char *dst, const unsigned char *src,
+ int offset);
+void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
+
+struct ath79_eth_pll_data {
+ u32 pll_10;
+ u32 pll_100;
+ u32 pll_1000;
+};
+
+extern struct ath79_eth_pll_data ath79_eth0_pll_data;
+extern struct ath79_eth_pll_data ath79_eth1_pll_data;
+
+extern struct ag71xx_platform_data ath79_eth0_data;
+extern struct ag71xx_platform_data ath79_eth1_data;
+extern struct platform_device ath79_eth0_device;
+extern struct platform_device ath79_eth1_device;
+void ath79_register_eth(unsigned int id);
+
+extern struct ag71xx_switch_platform_data ath79_switch_data;
+
+extern struct ag71xx_mdio_platform_data ath79_mdio0_data;
+extern struct ag71xx_mdio_platform_data ath79_mdio1_data;
+extern struct platform_device ath79_mdio0_device;
+extern struct platform_device ath79_mdio1_device;
+void ath79_register_mdio(unsigned int id, u32 phy_mask);
+
+void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio);
+void ath79_setup_ar934x_eth_cfg(u32 mask);
+void ath79_setup_qca955x_eth_cfg(u32 mask);
+
+#endif /* _ATH79_DEV_ETH_H */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.c
new file mode 100644
index 0000000..9323b31
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
+
+#include "dev-spi.h"
+#include "dev-m25p80.h"
+
+static struct ath79_spi_controller_data ath79_spi0_cdata =
+{
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
+static struct ath79_spi_controller_data ath79_spi1_cdata =
+{
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 1,
+};
+
+static struct spi_board_info ath79_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ath79_spi0_cdata,
+ },
+ {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ath79_spi1_cdata,
+ }
+};
+
+static struct ath79_spi_platform_data ath79_spi_data;
+
+void __init ath79_register_m25p80(struct flash_platform_data *pdata)
+{
+ ath79_spi_data.bus_num = 0;
+ ath79_spi_data.num_chipselect = 1;
+ ath79_spi0_cdata.is_flash = true;
+ ath79_spi_info[0].platform_data = pdata;
+ ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1);
+}
+
+static struct flash_platform_data *multi_pdata;
+
+static struct mtd_info *concat_devs[2] = { NULL, NULL };
+static struct work_struct mtd_concat_work;
+
+static void mtd_concat_add_work(struct work_struct *work)
+{
+ struct mtd_info *mtd;
+
+ mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash");
+
+ mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts);
+}
+
+static void mtd_concat_add(struct mtd_info *mtd)
+{
+ static bool registered = false;
+
+ if (registered)
+ return;
+
+ if (!strcmp(mtd->name, "spi0.0"))
+ concat_devs[0] = mtd;
+ else if (!strcmp(mtd->name, "spi0.1"))
+ concat_devs[1] = mtd;
+ else
+ return;
+
+ if (!concat_devs[0] || !concat_devs[1])
+ return;
+
+ registered = true;
+ INIT_WORK(&mtd_concat_work, mtd_concat_add_work);
+ schedule_work(&mtd_concat_work);
+}
+
+static void mtd_concat_remove(struct mtd_info *mtd)
+{
+}
+
+static void add_mtd_concat_notifier(void)
+{
+ static struct mtd_notifier not = {
+ .add = mtd_concat_add,
+ .remove = mtd_concat_remove,
+ };
+
+ register_mtd_user(&not);
+}
+
+
+void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
+{
+ multi_pdata = pdata;
+ add_mtd_concat_notifier();
+ ath79_spi_data.bus_num = 0;
+ ath79_spi_data.num_chipselect = 2;
+ ath79_spi0_cdata.is_flash = true;
+ ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.h
new file mode 100644
index 0000000..637b41a
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-m25p80.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_M25P80_H
+#define _ATH79_DEV_M25P80_H
+
+#include <linux/spi/flash.h>
+
+void ath79_register_m25p80(struct flash_platform_data *pdata) __init;
+void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init;
+
+#endif /* _ATH79_DEV_M25P80_H */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.c
new file mode 100644
index 0000000..9b5256e
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.c
@@ -0,0 +1,141 @@
+/*
+ * Atheros AR934X SoCs built-in NAND flash controller support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/platform/ar934x_nfc.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-nfc.h"
+
+static struct resource ath79_nfc_resources[2];
+static u64 ar934x_nfc_dmamask = DMA_BIT_MASK(32);
+static struct ar934x_nfc_platform_data ath79_nfc_data;
+
+static struct platform_device ath79_nfc_device = {
+ .name = AR934X_NFC_DRIVER_NAME,
+ .id = -1,
+ .resource = ath79_nfc_resources,
+ .num_resources = ARRAY_SIZE(ath79_nfc_resources),
+ .dev = {
+ .dma_mask = &ar934x_nfc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ath79_nfc_data,
+ },
+};
+
+static void __init ath79_nfc_init_resource(struct resource res[2],
+ unsigned long base,
+ unsigned long size,
+ int irq)
+{
+ memset(res, 0, sizeof(struct resource) * 2);
+
+ res[0].flags = IORESOURCE_MEM;
+ res[0].start = base;
+ res[0].end = base + size - 1;
+
+ res[1].flags = IORESOURCE_IRQ;
+ res[1].start = irq;
+ res[1].end = irq;
+}
+
+static void ar934x_nfc_hw_reset(bool active)
+{
+ if (active) {
+ ath79_device_reset_set(AR934X_RESET_NANDF);
+ udelay(100);
+
+ ath79_device_reset_set(AR934X_RESET_ETH_SWITCH_ANALOG);
+ udelay(250);
+ } else {
+ ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH_ANALOG);
+ udelay(250);
+
+ ath79_device_reset_clear(AR934X_RESET_NANDF);
+ udelay(100);
+ }
+}
+
+static void ar934x_nfc_setup(void)
+{
+ ath79_nfc_data.hw_reset = ar934x_nfc_hw_reset;
+
+ ath79_nfc_init_resource(ath79_nfc_resources,
+ AR934X_NFC_BASE, AR934X_NFC_SIZE,
+ ATH79_MISC_IRQ(21));
+
+ platform_device_register(&ath79_nfc_device);
+}
+
+static void qca955x_nfc_hw_reset(bool active)
+{
+ if (active) {
+ ath79_device_reset_set(QCA955X_RESET_NANDF);
+ udelay(250);
+ } else {
+ ath79_device_reset_clear(QCA955X_RESET_NANDF);
+ udelay(100);
+ }
+}
+
+static void qca955x_nfc_setup(void)
+{
+ ath79_nfc_data.hw_reset = qca955x_nfc_hw_reset;
+
+ ath79_nfc_init_resource(ath79_nfc_resources,
+ QCA955X_NFC_BASE, QCA955X_NFC_SIZE,
+ ATH79_MISC_IRQ(21));
+
+ platform_device_register(&ath79_nfc_device);
+}
+
+void __init ath79_nfc_set_select_chip(void (*f)(int chip_no))
+{
+ ath79_nfc_data.select_chip = f;
+}
+
+void __init ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd))
+{
+ ath79_nfc_data.scan_fixup = f;
+}
+
+void __init ath79_nfc_set_swap_dma(bool enable)
+{
+ ath79_nfc_data.swap_dma = enable;
+}
+
+void __init ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode)
+{
+ ath79_nfc_data.ecc_mode = mode;
+}
+
+void __init ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts)
+{
+ ath79_nfc_data.parts = parts;
+ ath79_nfc_data.nr_parts = nr_parts;
+}
+
+void __init ath79_register_nfc(void)
+{
+ if (soc_is_ar934x())
+ ar934x_nfc_setup();
+ else if (soc_is_qca955x())
+ qca955x_nfc_setup();
+ else
+ BUG();
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.h
new file mode 100644
index 0000000..3a1c88f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/dev-nfc.h
@@ -0,0 +1,34 @@
+/*
+ * Atheros AR934X SoCs built-in NAND Flash Controller support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_NFC_H
+#define _ATH79_DEV_NFC_H
+
+struct mtd_partition;
+enum ar934x_nfc_ecc_mode;
+
+#ifdef CONFIG_ATH79_DEV_NFC
+void ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts);
+void ath79_nfc_set_select_chip(void (*f)(int chip_no));
+void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd));
+void ath79_nfc_set_swap_dma(bool enable);
+void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode);
+void ath79_register_nfc(void);
+#else
+static inline void ath79_nfc_set_parts(struct mtd_partition *parts,
+ int nr_parts) {}
+static inline void ath79_nfc_set_select_chip(void (*f)(int chip_no)) {}
+static inline void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd)) {}
+static inline void ath79_nfc_set_swap_dma(bool enable) {}
+static inline void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode) {}
+static inline void ath79_register_nfc(void) {}
+#endif
+
+#endif /* _ATH79_DEV_NFC_H */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-ap96.c
new file mode 100644
index 0000000..15abb08
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-ap96.c
@@ -0,0 +1,154 @@
+/*
+ * ALFA Network AP96 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define ALFA_AP96_GPIO_PCIE_RESET 2
+#define ALFA_AP96_GPIO_SIM_DETECT 3
+#define ALFA_AP96_GPIO_MICROSD_CD 4
+#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
+
+#define ALFA_AP96_GPIO_BUTTON_RESET 11
+
+#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALFA_AP96_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }
+};
+
+static int alfa_ap96_mmc_get_cd(struct device *dev)
+{
+ return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD);
+}
+
+static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
+ .get_cd = alfa_ap96_mmc_get_cd,
+ .caps = MMC_CAP_NEEDS_POLL,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct ath79_spi_controller_data ap96_spi0_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+ .is_flash = true,
+};
+
+static struct ath79_spi_controller_data ap96_spi1_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 1,
+};
+
+static struct ath79_spi_controller_data ap96_spi2_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 2,
+};
+
+static struct spi_board_info alfa_ap96_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ap96_spi0_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "mmc_spi",
+ .platform_data = &alfa_ap96_mmc_data,
+ .controller_data = &ap96_spi1_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 2,
+ .max_speed_hz = 6250000,
+ .modalias = "rtc-pcf2123",
+ .controller_data = &ap96_spi2_cdata
+ },
+};
+
+static struct ath79_spi_platform_data alfa_ap96_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 3,
+};
+
+static void __init alfa_ap96_gpio_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
+ gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
+ gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
+ gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
+ gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
+ gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
+}
+
+#define ALFA_AP96_WAN_PHYMASK BIT(4)
+#define ALFA_AP96_LAN_PHYMASK BIT(5)
+#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
+
+static void __init alfa_ap96_init(void)
+{
+ alfa_ap96_gpio_setup();
+
+ ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
+ ath79_eth1_pll_data.pll_1000 = 0x110000;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
+ ath79_eth1_pll_data.pll_1000 = 0x110000;
+
+ ath79_register_eth(1);
+
+ ath79_register_pci();
+ ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
+ ARRAY_SIZE(alfa_ap96_spi_info));
+
+ ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(alfa_ap96_gpio_keys),
+ alfa_ap96_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
+ alfa_ap96_init);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-nx.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-nx.c
new file mode 100644
index 0000000..a515f4f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-alfa-nx.c
@@ -0,0 +1,113 @@
+/*
+ * ALFA Network N2/N5 board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define ALFA_NX_GPIO_LED_2 17
+#define ALFA_NX_GPIO_LED_3 16
+#define ALFA_NX_GPIO_LED_5 12
+#define ALFA_NX_GPIO_LED_6 8
+#define ALFA_NX_GPIO_LED_7 6
+#define ALFA_NX_GPIO_LED_8 7
+
+#define ALFA_NX_GPIO_BTN_RESET 11
+
+#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL)
+
+#define ALFA_NX_MAC0_OFFSET 0
+#define ALFA_NX_MAC1_OFFSET 6
+#define ALFA_NX_CALDATA_OFFSET 0x1000
+
+static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALFA_NX_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led alfa_nx_leds_gpio[] __initdata = {
+ {
+ .name = "alfa:green:led_2",
+ .gpio = ALFA_NX_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_3",
+ .gpio = ALFA_NX_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "alfa:red:led_5",
+ .gpio = ALFA_NX_GPIO_LED_5,
+ .active_low = 1,
+ }, {
+ .name = "alfa:amber:led_6",
+ .gpio = ALFA_NX_GPIO_LED_6,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_7",
+ .gpio = ALFA_NX_GPIO_LED_7,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_8",
+ .gpio = ALFA_NX_GPIO_LED_8,
+ .active_low = 1,
+ }
+};
+
+static void __init alfa_nx_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio),
+ alfa_nx_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(alfa_nx_gpio_keys),
+ alfa_nx_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + ALFA_NX_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + ALFA_NX_MAC1_OFFSET, 0);
+
+ /* WAN port */
+ ath79_register_eth(0);
+ /* LAN port */
+ ath79_register_eth(1);
+
+ ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5",
+ alfa_nx_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0258n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0258n.c
new file mode 100644
index 0000000..2495bcb
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0258n.c
@@ -0,0 +1,88 @@
+/*
+ * Allnet ALL0258N support
+ *
+ * Copyright (C) 2011 Daniel Golle <***@allnet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+/* found via /sys/gpio/... try and error */
+#define ALL0258N_GPIO_BTN_RESET 1
+#define ALL0258N_GPIO_LED_RSSIHIGH 13
+#define ALL0258N_GPIO_LED_RSSIMEDIUM 15
+#define ALL0258N_GPIO_LED_RSSILOW 14
+
+/* defaults taken from others machs */
+#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
+
+/* showed up in the original firmware's bootlog */
+#define ALL0258N_SEC_PHYMASK BIT(3)
+
+static struct gpio_led all0258n_leds_gpio[] __initdata = {
+ {
+ .name = "all0258n:green:rssihigh",
+ .gpio = ALL0258N_GPIO_LED_RSSIHIGH,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:yellow:rssimedium",
+ .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:red:rssilow",
+ .gpio = ALL0258N_GPIO_LED_RSSILOW,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALL0258N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init all0258n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
+ all0258n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(all0258n_gpio_keys),
+ all0258n_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
+ all0258n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0315n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0315n.c
new file mode 100644
index 0000000..387ee7f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-all0315n.c
@@ -0,0 +1,85 @@
+/*
+ * Allnet ALL0315N support
+ *
+ * Copyright (C) 2012 Daniel Golle <***@allnet.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define ALL0315N_GPIO_BTN_RESET 0
+#define ALL0315N_GPIO_LED_RSSIHIGH 14
+#define ALL0315N_GPIO_LED_RSSIMEDIUM 15
+#define ALL0315N_GPIO_LED_RSSILOW 16
+
+#define ALL0315N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALL0315N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0315N_KEYS_POLL_INTERVAL)
+
+static struct gpio_led all0315n_leds_gpio[] __initdata = {
+ {
+ .name = "all0315n:green:rssihigh",
+ .gpio = ALL0315N_GPIO_LED_RSSIHIGH,
+ .active_low = 1,
+ }, {
+ .name = "all0315n:yellow:rssimedium",
+ .gpio = ALL0315N_GPIO_LED_RSSIMEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "all0315n:red:rssilow",
+ .gpio = ALL0315N_GPIO_LED_RSSILOW,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button all0315n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALL0315N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALL0315N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init all0315n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ffc0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1ffc1000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(all0315n_leds_gpio),
+ all0315n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALL0315N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(all0315n_gpio_keys),
+ all0315n_gpio_keys);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap91_pci_init(ee, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALL0315N, "ALL0315N", "Allnet ALL0315N",
+ all0315n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap113.c
new file mode 100644
index 0000000..9b38faa
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap113.c
@@ -0,0 +1,84 @@
+/*
+ * Atheros AP113 board support
+ *
+ * Copyright (C) 2011 Florian Fainelli <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "pci.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define AP113_GPIO_LED_USB 0
+#define AP113_GPIO_LED_STATUS 1
+#define AP113_GPIO_LED_ST 11
+
+#define AP113_GPIO_BTN_JUMPSTART 12
+
+#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ap113_leds_gpio[] __initdata = {
+ {
+ .name = "ap113:green:usb",
+ .gpio = AP113_GPIO_LED_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "ap113:green:status",
+ .gpio = AP113_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+ {
+ .name = "ap113:green:st",
+ .gpio = AP113_GPIO_LED_ST,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP113_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+};
+
+static void __init ap113_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap113_gpio_keys),
+ ap113_gpio_keys);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
+ ap113_leds_gpio);
+
+ ath79_register_pci();
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
+ ap113_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap132.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap132.c
new file mode 100644
index 0000000..86fd8bd
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap132.c
@@ -0,0 +1,189 @@
+/*
+ * Atheros AP132 reference board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (c) 2013 Embedded Wireless GmbH <***@embeddedwireless.de>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP132_GPIO_LED_USB 4
+#define AP132_GPIO_LED_WLAN_5G 12
+#define AP132_GPIO_LED_WLAN_2G 13
+#define AP132_GPIO_LED_STATUS_RED 14
+#define AP132_GPIO_LED_WPS_RED 15
+
+#define AP132_GPIO_BTN_WPS 16
+
+#define AP132_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP132_KEYS_DEBOUNCE_INTERVAL (3 * AP132_KEYS_POLL_INTERVAL)
+
+#define AP132_MAC0_OFFSET 0
+#define AP132_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led ap132_leds_gpio[] __initdata = {
+ {
+ .name = "ap132:red:status",
+ .gpio = AP132_GPIO_LED_STATUS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "ap132:red:wps",
+ .gpio = AP132_GPIO_LED_WPS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "ap132:red:wlan-2g",
+ .gpio = AP132_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "ap132:red:usb",
+ .gpio = AP132_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap132_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP132_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP132_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg ap132_ar8327_pad0_cfg;
+
+static struct ar8327_platform_data ap132_ar8327_data = {
+ .pad0_cfg = &ap132_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info ap132_mdio1_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.1",
+ .phy_addr = 0,
+ .platform_data = &ap132_ar8327_data,
+ },
+};
+
+static void __init ap132_mdio_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+#define GPIO_IN_ENABLE3_ADDRESS 0x0050
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_MASK 0x00ff0000
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_LSB 16
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_SET(x) (((x) << GPIO_IN_ENABLE3_MII_GE1_MDI_LSB) & GPIO_IN_ENABLE3_MII_GE1_MDI_MASK)
+#define GPIO_OUT_FUNCTION4_ADDRESS 0x003c
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK 0xff000000
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB 24
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK)
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK 0x0000ff00
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB 8
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK)
+
+ base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+
+ t = __raw_readl(base + GPIO_IN_ENABLE3_ADDRESS);
+ t &= ~GPIO_IN_ENABLE3_MII_GE1_MDI_MASK;
+ t |= GPIO_IN_ENABLE3_MII_GE1_MDI_SET(19);
+ __raw_writel(t, base + GPIO_IN_ENABLE3_ADDRESS);
+
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 19), base + AR71XX_GPIO_REG_OE);
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 17), base + AR71XX_GPIO_REG_OE);
+
+
+ t = __raw_readl(base + GPIO_OUT_FUNCTION4_ADDRESS);
+ t &= ~(GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK);
+ t |= GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(0x20) | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(0x21);
+ __raw_writel(t, base + GPIO_OUT_FUNCTION4_ADDRESS);
+
+ iounmap(base);
+
+}
+
+static void __init ap132_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap132_leds_gpio),
+ ap132_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP132_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap132_gpio_keys),
+ ap132_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + AP132_WMAC_CALDATA_OFFSET, NULL);
+
+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
+ ap132_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
+ ap132_ar8327_pad0_cfg.sgmii_delay_en = true;
+
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ap132_mdio_setup();
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP132_MAC0_OFFSET, 0);
+
+ mdiobus_register_board_info(ap132_mdio1_info,
+ ARRAY_SIZE(ap132_mdio1_info));
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_mask = BIT(0);
+ ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP132, "AP132",
+ "Atheros AP132 reference board",
+ ap132_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap83.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap83.c
new file mode 100644
index 0000000..8519a9d
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap83.c
@@ -0,0 +1,275 @@
+/*
+ * Atheros AP83 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/vsc7385.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP83_GPIO_LED_WLAN 6
+#define AP83_GPIO_LED_POWER 14
+#define AP83_GPIO_LED_JUMPSTART 15
+#define AP83_GPIO_BTN_JUMPSTART 12
+#define AP83_GPIO_BTN_RESET 21
+
+#define AP83_050_GPIO_VSC7385_CS 1
+#define AP83_050_GPIO_VSC7385_MISO 3
+#define AP83_050_GPIO_VSC7385_MOSI 16
+#define AP83_050_GPIO_VSC7385_SCK 17
+
+#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition ap83_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x060000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x1a0000,
+ .size = 0x650000,
+ }, {
+ .name = "art",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x060000,
+ .size = 0x790000,
+ }
+};
+
+static struct physmap_flash_data ap83_flash_data = {
+ .width = 2,
+ .parts = ap83_flash_partitions,
+ .nr_parts = ARRAY_SIZE(ap83_flash_partitions),
+};
+
+static struct resource ap83_flash_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ap83_flash_device = {
+ .name = "ar91xx-flash",
+ .id = -1,
+ .resource = ap83_flash_resources,
+ .num_resources = ARRAY_SIZE(ap83_flash_resources),
+ .dev = {
+ .platform_data = &ap83_flash_data,
+ }
+};
+
+static struct gpio_led ap83_leds_gpio[] __initdata = {
+ {
+ .name = "ap83:green:jumpstart",
+ .gpio = AP83_GPIO_LED_JUMPSTART,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:power",
+ .gpio = AP83_GPIO_LED_POWER,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:wlan",
+ .gpio = AP83_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
+ {
+ .desc = "soft_reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP83_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "jumpstart",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP83_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ }
+};
+
+static struct resource ap83_040_spi_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ap83_040_spi_device = {
+ .name = "ap83-spi",
+ .id = 0,
+ .resource = ap83_040_spi_resources,
+ .num_resources = ARRAY_SIZE(ap83_040_spi_resources),
+};
+
+static struct spi_gpio_platform_data ap83_050_spi_data = {
+ .miso = AP83_050_GPIO_VSC7385_MISO,
+ .mosi = AP83_050_GPIO_VSC7385_MOSI,
+ .sck = AP83_050_GPIO_VSC7385_SCK,
+ .num_chipselect = 1,
+};
+
+static struct platform_device ap83_050_spi_device = {
+ .name = "spi_gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ap83_050_spi_data,
+ }
+};
+
+static void ap83_vsc7385_reset(void)
+{
+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
+ udelay(10);
+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
+ mdelay(50);
+}
+
+static struct vsc7385_platform_data ap83_vsc7385_data = {
+ .reset = ap83_vsc7385_reset,
+ .ucode_name = "vsc7385_ucode_ap83.bin",
+ .mac_cfg = {
+ .tx_ipg = 6,
+ .bit2 = 0,
+ .clk_sel = 3,
+ },
+};
+
+static struct spi_board_info ap83_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-vsc7385",
+ .platform_data = &ap83_vsc7385_data,
+ .controller_data = (void *) AP83_050_GPIO_VSC7385_CS,
+ }
+};
+
+static void __init ap83_generic_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0xfffffffe);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = 0x1;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_eth1_pll_data.pll_1000 = 0x1f000000;
+
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
+ ap83_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap83_gpio_keys),
+ ap83_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(eeprom, NULL);
+
+ platform_device_register(&ap83_flash_device);
+
+ spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
+}
+
+static void ap83_040_flash_lock(struct platform_device *pdev)
+{
+ ath79_flash_acquire();
+}
+
+static void ap83_040_flash_unlock(struct platform_device *pdev)
+{
+ ath79_flash_release();
+}
+
+static void __init ap83_040_setup(void)
+{
+ ap83_flash_data.lock = ap83_040_flash_lock;
+ ap83_flash_data.unlock = ap83_040_flash_unlock;
+ ap83_generic_setup();
+ platform_device_register(&ap83_040_spi_device);
+}
+
+static void __init ap83_050_setup(void)
+{
+ ap83_generic_setup();
+ platform_device_register(&ap83_050_spi_device);
+}
+
+static void __init ap83_setup(void)
+{
+ u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244);
+ unsigned int board_version;
+
+ board_version = (unsigned int)(board_id[0] - '0');
+ board_version += ((unsigned int)(board_id[1] - '0')) * 10;
+
+ switch (board_version) {
+ case 40:
+ ap83_040_setup();
+ break;
+ case 50:
+ ap83_050_setup();
+ break;
+ default:
+ printk(KERN_WARNING "AP83-%03u board is not yet supported\n",
+ board_version);
+ }
+}
+
+MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap96.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap96.c
new file mode 100644
index 0000000..35120d3
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ap96.c
@@ -0,0 +1,142 @@
+/*
+ * Atheros AP96 board support
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2010 Atheros Communications
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define AP96_GPIO_LED_12_GREEN 0
+#define AP96_GPIO_LED_3_GREEN 1
+#define AP96_GPIO_LED_2_GREEN 2
+#define AP96_GPIO_LED_WPS_GREEN 4
+#define AP96_GPIO_LED_5_GREEN 5
+#define AP96_GPIO_LED_4_ORANGE 6
+
+/* Reset button - next to the power connector */
+#define AP96_GPIO_BTN_RESET 3
+/* WPS button - next to a led on right */
+#define AP96_GPIO_BTN_WPS 8
+
+#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL)
+
+#define AP96_WMAC0_MAC_OFFSET 0x120c
+#define AP96_WMAC1_MAC_OFFSET 0x520c
+#define AP96_CALDATA0_OFFSET 0x1000
+#define AP96_CALDATA1_OFFSET 0x5000
+
+/*
+ * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
+ * below (from left to right on the board). Led 1 seems to be on whenever the
+ * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
+ * others are green.
+ *
+ * In addition, there is one led next to a button on the right side for WPS.
+ */
+static struct gpio_led ap96_leds_gpio[] __initdata = {
+ {
+ .name = "ap96:green:led2",
+ .gpio = AP96_GPIO_LED_2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led3",
+ .gpio = AP96_GPIO_LED_3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:orange:led4",
+ .gpio = AP96_GPIO_LED_4_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led5",
+ .gpio = AP96_GPIO_LED_5_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led12",
+ .gpio = AP96_GPIO_LED_12_GREEN,
+ .active_low = 1,
+ }, { /* next to a button on right */
+ .name = "ap96:green:wps",
+ .gpio = AP96_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap96_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP96_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP96_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+#define AP96_WAN_PHYMASK 0x10
+#define AP96_LAN_PHYMASK 0x0f
+
+static void __init ap96_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK;
+
+ ath79_eth1_pll_data.pll_1000 = 0x1f000000;
+
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
+ ap96_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap96_gpio_keys),
+ ap96_gpio_keys);
+
+ ap94_pci_init(art + AP96_CALDATA0_OFFSET,
+ art + AP96_WMAC0_MAC_OFFSET,
+ art + AP96_CALDATA1_OFFSET,
+ art + AP96_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-archer-c7.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-archer-c7.c
new file mode 100644
index 0000000..01719eb
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-archer-c7.c
@@ -0,0 +1,257 @@
+/*
+ * TP-LINK Archer C7/TL-WDR4900 v2 board support
+ *
+ * Copyright (c) 2013 Gabor Juhos <***@openwrt.org>
+ * Copyright (c) 2014 施康成 <***@tenninjas.ca>
+ *
+ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
+ * Copyright (c) 2012 Qualcomm Atheros
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define ARCHER_C7_GPIO_LED_WLAN2G 12
+#define ARCHER_C7_GPIO_LED_SYSTEM 14
+#define ARCHER_C7_GPIO_LED_QSS 15
+#define ARCHER_C7_GPIO_LED_WLAN5G 17
+#define ARCHER_C7_GPIO_LED_USB1 18
+#define ARCHER_C7_GPIO_LED_USB2 19
+
+#define ARCHER_C7_GPIO_BTN_RFKILL 13
+#define ARCHER_C7_GPIO_BTN_RESET 16
+
+#define ARCHER_C7_GPIO_USB1_POWER 22
+#define ARCHER_C7_GPIO_USB2_POWER 21
+
+#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
+#define ARCHER_C7_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *archer_c7_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data archer_c7_flash_data = {
+ .part_probes = archer_c7_part_probes,
+};
+
+static struct gpio_led archer_c7_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:qss",
+ .gpio = ARCHER_C7_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:system",
+ .gpio = ARCHER_C7_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wlan2g",
+ .gpio = ARCHER_C7_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wlan5g",
+ .gpio = ARCHER_C7_GPIO_LED_WLAN5G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb1",
+ .gpio = ARCHER_C7_GPIO_LED_USB1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb2",
+ .gpio = ARCHER_C7_GPIO_LED_USB2,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C7_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C7_GPIO_BTN_RFKILL,
+ },
+};
+
+static const struct ar8327_led_info archer_c7_leds_ar8327[] __initconst = {
+ AR8327_LED_INFO(PHY0_0, HW, "tp-link:blue:wan"),
+ AR8327_LED_INFO(PHY1_0, HW, "tp-link:blue:lan1"),
+ AR8327_LED_INFO(PHY2_0, HW, "tp-link:blue:lan2"),
+ AR8327_LED_INFO(PHY3_0, HW, "tp-link:blue:lan3"),
+ AR8327_LED_INFO(PHY4_0, HW, "tp-link:blue:lan4"),
+};
+
+/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
+static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
+static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data archer_c7_ar8327_data = {
+ .pad0_cfg = &archer_c7_ar8327_pad0_cfg,
+ .pad6_cfg = &archer_c7_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &archer_c7_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(archer_c7_leds_ar8327),
+ .leds = archer_c7_leds_ar8327,
+};
+
+static struct mdio_board_info archer_c7_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &archer_c7_ar8327_data,
+ },
+};
+
+static void __init common_setup(bool pcie_slot)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&archer_c7_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
+ archer_c7_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c7_gpio_keys),
+ archer_c7_gpio_keys);
+
+ ath79_init_mac(tmpmac, mac, -1);
+ ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac);
+
+ if (pcie_slot) {
+ ath79_register_pci();
+ } else {
+ ath79_init_mac(tmpmac, mac, -1);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac);
+ }
+
+ mdiobus_register_board_info(archer_c7_mdio0_info,
+ ARRAY_SIZE(archer_c7_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ gpio_request_one(ARCHER_C7_GPIO_USB1_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB1 power");
+ gpio_request_one(ARCHER_C7_GPIO_USB2_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB2 power");
+ ath79_register_usb();
+}
+
+static void __init archer_c7_setup(void)
+{
+ common_setup(true);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7",
+ archer_c7_setup);
+
+static void __init tl_wdr4900_v2_setup(void)
+{
+ common_setup(false);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2",
+ tl_wdr4900_v2_setup)
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-aw-nr580.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-aw-nr580.c
new file mode 100644
index 0000000..281129b
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-aw-nr580.c
@@ -0,0 +1,107 @@
+/*
+ * AzureWave AW-NR580 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define AW_NR580_GPIO_LED_READY_RED 0
+#define AW_NR580_GPIO_LED_WLAN 1
+#define AW_NR580_GPIO_LED_READY_GREEN 2
+#define AW_NR580_GPIO_LED_WPS_GREEN 4
+#define AW_NR580_GPIO_LED_WPS_AMBER 5
+
+#define AW_NR580_GPIO_BTN_WPS 3
+#define AW_NR580_GPIO_BTN_RESET 11
+
+#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL)
+
+static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
+ {
+ .name = "aw-nr580:red:ready",
+ .gpio = AW_NR580_GPIO_LED_READY_RED,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:ready",
+ .gpio = AW_NR580_GPIO_LED_READY_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:wps",
+ .gpio = AW_NR580_GPIO_LED_WPS_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:amber:wps",
+ .gpio = AW_NR580_GPIO_LED_WPS_AMBER,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:wlan",
+ .gpio = AW_NR580_GPIO_LED_WLAN,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AW_NR580_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AW_NR580_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static const char *aw_nr580_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data aw_nr580_flash_data = {
+ .part_probes = aw_nr580_part_probes,
+};
+
+static void __init aw_nr580_setup(void)
+{
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+
+ ath79_register_pci();
+
+ ath79_register_m25p80(&aw_nr580_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
+ aw_nr580_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(aw_nr580_gpio_keys),
+ aw_nr580_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
+ aw_nr580_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-bhu-bxu2000n2-a.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-bhu-bxu2000n2-a.c
new file mode 100644
index 0000000..8d7c611
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-bhu-bxu2000n2-a.c
@@ -0,0 +1,120 @@
+/*
+ * BHU BXU2000n-2 A1 board support
+ *
+ * Copyright (C) 2013 Terry Yang <***@bhunetworks.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define BHU_BXU2000N2_A1_GPIO_LED_WLAN 13
+#define BHU_BXU2000N2_A1_GPIO_LED_WAN 19
+#define BHU_BXU2000N2_A1_GPIO_LED_LAN 21
+#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM 14
+
+#define BHU_BXU2000N2_A1_GPIO_BTN_RESET 17
+
+#define BHU_BXU2000N2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL \
+ (3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL)
+
+static const char *bhu_bxu2000n2_part_probes[] = {
+ "cmdlinepart",
+ NULL,
+};
+
+static struct flash_platform_data bhu_bxu2000n2_flash_data = {
+ .part_probes = bhu_bxu2000n2_part_probes,
+};
+
+static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = {
+ {
+ .name = "bhu:green:status",
+ .gpio = BHU_BXU2000N2_A1_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "bhu:green:lan",
+ .gpio = BHU_BXU2000N2_A1_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "bhu:green:wan",
+ .gpio = BHU_BXU2000N2_A1_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "bhu:green:wlan",
+ .gpio = BHU_BXU2000N2_A1_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BHU_BXU2000N2_A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init bhu_ap123_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&bhu_bxu2000n2_flash_data);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ /* GMAC0 is connected to the PHY4 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch. Only use PHY3 */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.phy_mask = BIT(3);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, ee+2);
+}
+
+static void __init bhu_bxu2000n2_a1_setup(void)
+{
+ bhu_ap123_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio),
+ bhu_bxu2000n2_a1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys),
+ bhu_bxu2000n2_a1_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1",
+ "BHU BXU2000n-2 rev. A1",
+ bhu_bxu2000n2_a1_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-cap4200ag.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-cap4200ag.c
new file mode 100644
index 0000000..18944c4
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-cap4200ag.c
@@ -0,0 +1,131 @@
+/*
+ * Senao CAP4200AG board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define CAP4200AG_GPIO_LED_PWR_GREEN 12
+#define CAP4200AG_GPIO_LED_PWR_AMBER 13
+#define CAP4200AG_GPIO_LED_LAN_GREEN 14
+#define CAP4200AG_GPIO_LED_LAN_AMBER 15
+#define CAP4200AG_GPIO_LED_WLAN_GREEN 18
+#define CAP4200AG_GPIO_LED_WLAN_AMBER 19
+
+#define CAP4200AG_GPIO_BTN_RESET 17
+
+#define CAP4200AG_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CAP4200AG_KEYS_DEBOUNCE_INTERVAL (3 * CAP4200AG_KEYS_POLL_INTERVAL)
+
+#define CAP4200AG_MAC_OFFSET 0
+#define CAP4200AG_WMAC_CALDATA_OFFSET 0x1000
+#define CAP4200AG_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led cap4200ag_leds_gpio[] __initdata = {
+ {
+ .name = "senao:green:pwr",
+ .gpio = CAP4200AG_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "senao:amber:pwr",
+ .gpio = CAP4200AG_GPIO_LED_PWR_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "senao:green:lan",
+ .gpio = CAP4200AG_GPIO_LED_LAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "senao:amber:lan",
+ .gpio = CAP4200AG_GPIO_LED_LAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "senao:green:wlan",
+ .gpio = CAP4200AG_GPIO_LED_WLAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "senao:amber:wlan",
+ .gpio = CAP4200AG_GPIO_LED_WLAN_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button cap4200ag_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CAP4200AG_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CAP4200AG_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init cap4200ag_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 mac[6];
+
+ ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_GREEN,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_AMBER,
+ AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cap4200ag_leds_gpio),
+ cap4200ag_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CAP4200AG_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cap4200ag_gpio_keys),
+ cap4200ag_gpio_keys);
+
+ ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -1);
+ ath79_wmac_disable_2ghz();
+ ath79_register_wmac(art + CAP4200AG_WMAC_CALDATA_OFFSET, mac);
+
+ ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -2);
+ ap91_pci_init(art + CAP4200AG_PCIE_CALDATA_OFFSET, mac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + CAP4200AG_MAC_OFFSET, -2);
+
+ /* GMAC0 is connected to an external PHY */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_CAP4200AG, "CAP4200AG", "Senao CAP4200AG",
+ cap4200ag_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-carambola2.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-carambola2.c
new file mode 100644
index 0000000..e7bc861
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-carambola2.c
@@ -0,0 +1,114 @@
+/*
+ * 8devices Carambola2 board support
+ *
+ * Copyright (C) 2013 Darius Augulis <***@8devices.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define CARAMBOLA2_GPIO_LED_WLAN 0
+#define CARAMBOLA2_GPIO_LED_ETH0 14
+#define CARAMBOLA2_GPIO_LED_ETH1 13
+
+#define CARAMBOLA2_GPIO_BTN_JUMPSTART 11
+#define CARAMBOLA2_GPIO_BTN_RESET 12
+
+#define CARAMBOLA2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL (3 * CARAMBOLA2_KEYS_POLL_INTERVAL)
+
+#define CARAMBOLA2_MAC0_OFFSET 0x0000
+#define CARAMBOLA2_MAC1_OFFSET 0x0006
+#define CARAMBOLA2_CALDATA_OFFSET 0x1000
+#define CARAMBOLA2_WMAC_MAC_OFFSET 0x1002
+
+static struct gpio_led carambola2_leds_gpio[] __initdata = {
+ {
+ .name = "carambola2:green:wlan",
+ .gpio = CARAMBOLA2_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "carambola2:orange:eth0",
+ .gpio = CARAMBOLA2_GPIO_LED_ETH0,
+ .active_low = 0,
+ }, {
+ .name = "carambola2:orange:eth1",
+ .gpio = CARAMBOLA2_GPIO_LED_ETH1,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button carambola2_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CARAMBOLA2_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CARAMBOLA2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init carambola2_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_wmac(art + CARAMBOLA2_CALDATA_OFFSET,
+ art + CARAMBOLA2_WMAC_MAC_OFFSET);
+
+ ath79_setup_ar933x_phy4_switch(true, true);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + CARAMBOLA2_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + CARAMBOLA2_MAC1_OFFSET, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+}
+
+static void __init carambola2_setup(void)
+{
+ carambola2_common_setup();
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(carambola2_leds_gpio),
+ carambola2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CARAMBOLA2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(carambola2_gpio_keys),
+ carambola2_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_CARAMBOLA2, "CARAMBOLA2", "8devices Carambola2 board",
+ carambola2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-505-a1.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-505-a1.c
new file mode 100644
index 0000000..d391465
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-505-a1.c
@@ -0,0 +1,116 @@
+/*
+ * DLink DIR-505 A1 board support
+ *
+ * Copyright (C) 2013 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define DIR_505A1_GPIO_BTN_WPS 11 /* verify */
+#define DIR_505A1_GPIO_BTN_RESET 12 /* verify */
+
+#define DIR_505A1_GPIO_LED_RED 26 /* unused, fyi */
+#define DIR_505A1_GPIO_LED_GREEN 27
+
+#define DIR_505A1_GPIO_WAN_LED_ENABLE 1
+
+#define DIR_505A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_505A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_505A1_KEYS_POLL_INTERVAL)
+
+#define DIR_505A1_ART_ADDRESS 0x1f010000
+#define DIR_505A1_CALDATA_OFFSET 0x1000
+
+#define DIR_505A1_MAC_PART_ADDRESS 0x1f020000
+#define DIR_505A1_LAN_MAC_OFFSET 0x04
+#define DIR_505A1_WAN_MAC_OFFSET 0x16
+
+static struct gpio_led dir_505_a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:green:power",
+ .gpio = DIR_505A1_GPIO_LED_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:red:status",
+ .gpio = DIR_505A1_GPIO_LED_RED,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button dir_505_a1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_505A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_505A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_505_a1_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(DIR_505A1_ART_ADDRESS);
+ u8 *mac = (u8 *) KSEG1ADDR(DIR_505A1_MAC_PART_ADDRESS);
+ u8 lan_mac[ETH_ALEN];
+ u8 wan_mac[ETH_ALEN];
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ gpio_request_one(DIR_505A1_GPIO_WAN_LED_ENABLE,
+ GPIOF_OUT_INIT_LOW, "WAN LED enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_505_a1_leds_gpio),
+ dir_505_a1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, DIR_505A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_505_a1_gpio_keys),
+ dir_505_a1_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_usb();
+
+ ath79_parse_ascii_mac(mac + DIR_505A1_LAN_MAC_OFFSET, lan_mac);
+ ath79_parse_ascii_mac(mac + DIR_505A1_WAN_MAC_OFFSET, wan_mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + DIR_505A1_CALDATA_OFFSET, lan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_505_A1, "DIR-505-A1",
+ "D-Link DIR-505 rev. A1", dir_505_a1_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-600-a1.c
new file mode 100644
index 0000000..321fdce
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-600-a1.c
@@ -0,0 +1,159 @@
+/*
+ * D-Link DIR-600 rev. A1 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <***@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_600_A1_GPIO_LED_WPS 0
+#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
+#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
+#define DIR_600_A1_GPIO_LED_LAN1 13
+#define DIR_600_A1_GPIO_LED_LAN2 14
+#define DIR_600_A1_GPIO_LED_LAN3 15
+#define DIR_600_A1_GPIO_LED_LAN4 16
+#define DIR_600_A1_GPIO_LED_WAN_AMBER 7
+#define DIR_600_A1_GPIO_LED_WAN_GREEN 17
+
+#define DIR_600_A1_GPIO_BTN_RESET 8
+#define DIR_600_A1_GPIO_BTN_WPS 12
+
+#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
+
+#define DIR_600_A1_NVRAM_ADDR 0x1f030000
+#define DIR_600_A1_NVRAM_SIZE 0x10000
+
+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:green:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "d-link:amber:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "d-link:amber:wan",
+ .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan1",
+ .gpio = DIR_600_A1_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan2",
+ .gpio = DIR_600_A1_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan3",
+ .gpio = DIR_600_A1_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan4",
+ .gpio = DIR_600_A1_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_600_A1_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_600_A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_600_A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_600_a1_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
+ "lan_mac=", mac_buff) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ath79_register_m25p80(NULL);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
+ dir_600_a1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_600_a1_gpio_keys),
+ dir_600_a1_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
+ dir_600_a1_setup);
+
+static void __init dir_615_e1_setup(void)
+{
+ dir_600_a1_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_E1, "DIR-615-E1", "D-Link DIR-615 rev. E1",
+ dir_615_e1_setup);
+
+static void __init dir_615_e4_setup(void)
+{
+ dir_600_a1_setup();
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-615-c1.c
new file mode 100644
index 0000000..425be30
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-615-c1.c
@@ -0,0 +1,133 @@
+/*
+ * D-Link DIR-615 rev C1 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */
+#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */
+#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */
+
+/* buttons may need refinement */
+
+#define DIR_615C1_GPIO_BTN_WPS 12
+#define DIR_615C1_GPIO_BTN_RESET 21
+
+#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
+
+#define DIR_615C1_CONFIG_ADDR 0x1f020000
+#define DIR_615C1_CONFIG_SIZE 0x10000
+
+static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:orange:status",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_615C1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WAN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wancpu",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wlan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:status",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:wan",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN,
+ .active_low = 1,
+ }
+
+};
+
+static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615C1_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615C1_GPIO_BTN_WPS,
+ }
+};
+
+#define DIR_615C1_LAN_PHYMASK BIT(0)
+#define DIR_615C1_WAN_PHYMASK BIT(4)
+#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \
+ DIR_615C1_WAN_PHYMASK))
+
+static void __init dir_615c1_setup(void)
+{
+ const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+ u8 *wlan_mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
+ "lan_mac=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ wlan_mac = mac;
+ }
+
+ ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
+ dir_615c1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615c1_gpio_keys),
+ dir_615c1_gpio_keys);
+
+ ath79_register_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
+ dir_615c1_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-b1.c
new file mode 100644
index 0000000..9b82990
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-b1.c
@@ -0,0 +1,191 @@
+/*
+ * D-Link DIR-825 rev. B1 board support
+ *
+ * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
+ *
+ * based on mach-wndr3700.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define DIR825B1_GPIO_LED_BLUE_USB 0
+#define DIR825B1_GPIO_LED_ORANGE_POWER 1
+#define DIR825B1_GPIO_LED_BLUE_POWER 2
+#define DIR825B1_GPIO_LED_BLUE_WPS 4
+#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
+#define DIR825B1_GPIO_LED_BLUE_PLANET 11
+
+#define DIR825B1_GPIO_BTN_RESET 3
+#define DIR825B1_GPIO_BTN_WPS 8
+
+#define DIR825B1_GPIO_RTL8366_SDA 5
+#define DIR825B1_GPIO_RTL8366_SCK 7
+
+#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL)
+
+#define DIR825B1_CAL0_OFFSET 0x1000
+#define DIR825B1_CAL1_OFFSET 0x5000
+#define DIR825B1_MAC0_OFFSET 0xffa0
+#define DIR825B1_MAC1_OFFSET 0xffb4
+
+#define DIR825B1_CAL_LOCATION_0 0x1f660000
+#define DIR825B1_CAL_LOCATION_1 0x1f7f0000
+
+static struct gpio_led dir825b1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:blue:usb",
+ .gpio = DIR825B1_GPIO_LED_BLUE_USB,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:power",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:power",
+ .gpio = DIR825B1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR825B1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:planet",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:planet",
+ .gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825B1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825B1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
+ { .reg = 0x06, .val = 0x0108 },
+};
+
+static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
+ .gpio_sda = DIR825B1_GPIO_RTL8366_SDA,
+ .gpio_sck = DIR825B1_GPIO_RTL8366_SCK,
+ .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
+ .initvals = dir825b1_rtl8366s_initvals,
+};
+
+static struct platform_device dir825b1_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &dir825b1_rtl8366s_data,
+ }
+};
+
+static bool __init dir825b1_is_caldata_valid(u8 *p)
+{
+ u16 *magic0, *magic1;
+
+ magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
+ magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
+
+ return (*magic0 == 0xa55a && *magic1 == 0xa55a);
+}
+
+static void __init dir825b1_wlan_init(void)
+{
+ u8 *caldata;
+ u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
+ u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
+
+ caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
+ if (!dir825b1_is_caldata_valid(caldata)) {
+ caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
+ if (!dir825b1_is_caldata_valid(caldata)) {
+ pr_err("no calibration data found\n");
+ return;
+ }
+ }
+
+ ath79_parse_ascii_mac(caldata + DIR825B1_MAC0_OFFSET, mac0);
+ ath79_parse_ascii_mac(caldata + DIR825B1_MAC1_OFFSET, mac1);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 0);
+ ath79_init_mac(wmac0, mac0, 0);
+ ath79_init_mac(wmac1, mac1, 1);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, wmac0,
+ caldata + DIR825B1_CAL1_OFFSET, wmac1);
+}
+
+static void __init dir825b1_setup(void)
+{
+ dir825b1_wlan_init();
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+
+ ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
+ dir825b1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir825b1_gpio_keys),
+ dir825b1_gpio_keys);
+
+ ath79_register_usb();
+
+ platform_device_register(&dir825b1_rtl8366s_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
+ dir825b1_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-c1.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-c1.c
new file mode 100644
index 0000000..9c4c1a8
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dir-825-c1.c
@@ -0,0 +1,241 @@
+/*
+ * D-Link DIR-825 rev. C1 board support
+ *
+ * Copyright (C) 2013 Alexander Stadler
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DIR825C1_GPIO_LED_BLUE_USB 11
+#define DIR825C1_GPIO_LED_AMBER_POWER 14
+#define DIR825C1_GPIO_LED_BLUE_POWER 22
+#define DIR825C1_GPIO_LED_BLUE_WPS 15
+#define DIR825C1_GPIO_LED_AMBER_PLANET 19
+#define DIR825C1_GPIO_LED_BLUE_PLANET 18
+#define DIR825C1_GPIO_LED_WLAN_2G 13
+
+#define DIR825C1_GPIO_WAN_LED_ENABLE 20
+
+#define DIR825C1_GPIO_BTN_RESET 17
+#define DIR825C1_GPIO_BTN_WPS 16
+
+#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL)
+
+#define DIR825C1_MAC0_OFFSET 0x4
+#define DIR825C1_MAC1_OFFSET 0x18
+#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000
+#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led dir825c1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:blue:usb",
+ .gpio = DIR825C1_GPIO_LED_BLUE_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:amber:power",
+ .gpio = DIR825C1_GPIO_LED_AMBER_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:blue:power",
+ .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:blue:wps",
+ .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:amber:planet",
+ .gpio = DIR825C1_GPIO_LED_AMBER_PLANET,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:blue:wlan2g",
+ .gpio = DIR825C1_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led dir835a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:amber:power",
+ .gpio = DIR825C1_GPIO_LED_AMBER_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:power",
+ .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:blue:wps",
+ .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:amber:planet",
+ .gpio = DIR825C1_GPIO_LED_AMBER_PLANET,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:planet",
+ .gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
+ {
+ .desc = "Soft reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825C1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825C1_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
+ .led_ctrl0 = 0x00000000,
+ .led_ctrl1 = 0xc737c737,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x00c30c00,
+ .open_drain = true,
+};
+
+static struct ar8327_platform_data dir825c1_ar8327_data = {
+ .pad0_cfg = &dir825c1_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &dir825c1_ar8327_led_cfg,
+};
+
+static struct mdio_board_info dir825c1_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &dir825c1_ar8327_data,
+ },
+};
+
+static void __init dir825c1_generic_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
+ u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
+
+ ath79_parse_ascii_mac(mac + DIR825C1_MAC0_OFFSET, mac0);
+ ath79_parse_ascii_mac(mac + DIR825C1_MAC1_OFFSET, mac1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir825c1_gpio_keys),
+ dir825c1_gpio_keys);
+
+ ath79_init_mac(wmac0, mac0, 0);
+ ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0);
+
+ ath79_init_mac(wmac1, mac1, 1);
+ ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(dir825c1_mdio0_info,
+ ARRAY_SIZE(dir825c1_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+}
+
+static void __init dir825c1_setup(void)
+{
+ ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB,
+ AR934X_GPIO_OUT_GPIO);
+
+ gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE,
+ GPIOF_OUT_INIT_LOW, "WAN LED enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
+ dir825c1_leds_gpio);
+
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+
+ dir825c1_generic_setup();
+}
+
+static void __init dir835a1_setup(void)
+{
+ dir825c1_ar8327_data.led_cfg = NULL;
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio),
+ dir835a1_leds_gpio);
+
+ dir825c1_generic_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
+ "D-Link DIR-825 rev. C1",
+ dir825c1_setup);
+
+MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1",
+ "D-Link DIR-835 rev. A1",
+ dir835a1_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dragino2.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dragino2.c
new file mode 100644
index 0000000..156fbe5
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-dragino2.c
@@ -0,0 +1,127 @@
+/*
+ * DRAGINO V2 board support, based on Atheros AP121 board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2012 Elektra Wagenrad <***@villagetelco.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DRAGINO2_GPIO_LED_WLAN 0
+#define DRAGINO2_GPIO_LED_LAN 13
+#define DRAGINO2_GPIO_LED_WAN 17
+
+/*
+ * The following GPIO is actually named "Router" on the board.
+ * However, since the "Router" feature is not supported as of yet
+ * we use it to display USB activity.
+ */
+
+#define DRAGINO2_GPIO_LED_USB 28
+#define DRAGINO2_GPIO_BTN_JUMPSTART 11
+#define DRAGINO2_GPIO_BTN_RESET 12
+
+#define DRAGINO2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DRAGINO2_KEYS_DEBOUNCE_INTERVAL (3 * DRAGINO2_KEYS_POLL_INTERVAL)
+
+#define DRAGINO2_MAC0_OFFSET 0x0000
+#define DRAGINO2_MAC1_OFFSET 0x0006
+#define DRAGINO2_CALDATA_OFFSET 0x1000
+#define DRAGINO2_WMAC_MAC_OFFSET 0x1002
+
+static struct gpio_led dragino2_leds_gpio[] __initdata = {
+ {
+ .name = "dragino2:red:lan",
+ .gpio = DRAGINO2_GPIO_LED_LAN,
+ .active_low = 0,
+ },
+ {
+ .name = "dragino2:red:wlan",
+ .gpio = DRAGINO2_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "dragino2:red:wan",
+ .gpio = DRAGINO2_GPIO_LED_WAN,
+ .active_low = 0,
+ },
+ {
+ .name = "dragino2:red:usb",
+ .gpio = DRAGINO2_GPIO_LED_USB,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button dragino2_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DRAGINO2_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DRAGINO2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init dragino2_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_wmac(art + DRAGINO2_CALDATA_OFFSET,
+ art + DRAGINO2_WMAC_MAC_OFFSET);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DRAGINO2_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DRAGINO2_MAC1_OFFSET, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* Enable GPIO15 and GPIO16 and possibly GPIO26 and GPIO27 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+}
+
+static void __init dragino2_setup(void)
+{
+ dragino2_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dragino2_leds_gpio),
+ dragino2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DRAGINO2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dragino2_gpio_keys),
+ dragino2_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_DRAGINO2, "DRAGINO2", "Dragino Dragino v2",
+ dragino2_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-eap7660d.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-eap7660d.c
new file mode 100644
index 0000000..787e627
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-eap7660d.c
@@ -0,0 +1,181 @@
+/*
+ * Senao EAP7660D board support
+ *
+ * Copyright (C) 2010 Daniel Golle <***@gmail.com>
+ * Copyright (C) 2008 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath5k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */
+#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL)
+
+#define EAP7660D_GPIO_DS4 7
+#define EAP7660D_GPIO_DS5 2
+#define EAP7660D_GPIO_DS7 0
+#define EAP7660D_GPIO_DS8 4
+#define EAP7660D_GPIO_SW1 3
+#define EAP7660D_GPIO_SW3 8
+#define EAP7660D_PHYMASK BIT(20)
+#define EAP7660D_BOARDCONFIG 0x1F7F0000
+#define EAP7660D_GBIC_MAC_OFFSET 0x1000
+#define EAP7660D_WMAC0_MAC_OFFSET 0x1010
+#define EAP7660D_WMAC1_MAC_OFFSET 0x1016
+#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000
+#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000
+
+#ifdef CONFIG_PCI
+static struct ath5k_platform_data eap7660d_wmac0_data;
+static struct ath5k_platform_data eap7660d_wmac1_data;
+static char eap7660d_wmac0_mac[6];
+static char eap7660d_wmac1_mac[6];
+static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
+static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
+
+static int eap7660d_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 17:
+ dev->dev.platform_data = &eap7660d_wmac0_data;
+ break;
+
+ case 18:
+ dev->dev.platform_data = &eap7660d_wmac1_data;
+ break;
+ }
+
+ return 0;
+}
+
+void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+ if (cal_data0 && *cal_data0 == 0xa55a) {
+ memcpy(eap7660d_wmac0_eeprom, cal_data0,
+ ATH5K_PLAT_EEP_MAX_WORDS);
+ eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom;
+ }
+
+ if (cal_data1 && *cal_data1 == 0xa55a) {
+ memcpy(eap7660d_wmac1_eeprom, cal_data1,
+ ATH5K_PLAT_EEP_MAX_WORDS);
+ eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom;
+ }
+
+ if (mac_addr0) {
+ memcpy(eap7660d_wmac0_mac, mac_addr0,
+ sizeof(eap7660d_wmac0_mac));
+ eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac;
+ }
+
+ if (mac_addr1) {
+ memcpy(eap7660d_wmac1_mac, mac_addr1,
+ sizeof(eap7660d_wmac1_mac));
+ eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init);
+ ath79_register_pci();
+}
+#else
+static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+}
+#endif /* CONFIG_PCI */
+
+static struct gpio_led eap7660d_leds_gpio[] __initdata = {
+ {
+ .name = "eap7660d:green:ds8",
+ .gpio = EAP7660D_GPIO_DS8,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds5",
+ .gpio = EAP7660D_GPIO_DS5,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds7",
+ .gpio = EAP7660D_GPIO_DS7,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds4",
+ .gpio = EAP7660D_GPIO_DS4,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EAP7660D_GPIO_SW1,
+ .active_low = 1,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EAP7660D_GPIO_SW3,
+ .active_low = 1,
+ }
+};
+
+static const char *eap7660d_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data eap7660d_flash_data = {
+ .part_probes = eap7660d_part_probes,
+};
+
+static void __init eap7660d_setup(void)
+{
+ u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG);
+
+ ath79_register_mdio(0, ~EAP7660D_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = EAP7660D_PHYMASK;
+ ath79_register_eth(0);
+ ath79_register_m25p80(&eap7660d_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
+ eap7660d_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(eap7660d_gpio_keys),
+ eap7660d_gpio_keys);
+ eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET,
+ boardconfig + EAP7660D_WMAC0_MAC_OFFSET,
+ boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET,
+ boardconfig + EAP7660D_WMAC1_MAC_OFFSET);
+};
+
+MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
+ eap7660d_setup);
+
+MIPS_MACHINE(ATH79_MACH_ALL0305, "ALL0305", "Allnet ALL0305",
+ eap7660d_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-m150.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-m150.c
new file mode 100644
index 0000000..72a396d
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-m150.c
@@ -0,0 +1,112 @@
+/*
+ * Easy-Link EL-M150 board support
+ *
+ * Copyright (C) 2012 huangfc <***@163.com>
+ * Copyright (C) 2012 HYS <***@qq.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
+
+#define EL_M150_GPIO_BTN6 6
+#define EL_M150_GPIO_BTN7 7
+#define EL_M150_GPIO_BTN_RESET 11
+
+#define EL_M150_GPIO_LED_SYSTEM 27
+#define EL_M150_GPIO_USB_POWER 8
+
+#define EL_M150_KEYS_POLL_INTERVAL 20 /* msecs */
+#define EL_M150_KEYS_DEBOUNCE_INTERVAL (3 * EL_M150_KEYS_POLL_INTERVAL)
+
+static const char *EL_M150_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data EL_M150_flash_data = {
+ .part_probes = EL_M150_part_probes,
+};
+
+static struct gpio_led EL_M150_leds_gpio[] __initdata = {
+ {
+ .name = "ELINK:green:system",
+ .gpio = EL_M150_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button EL_M150_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "BTN_6",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN6,
+ .active_low = 1,
+ },
+ {
+ .desc = "BTN_7",
+ .type = EV_KEY,
+ .code = BTN_7,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN7,
+ .active_low = 1,
+ },
+};
+
+static void __init el_m150_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(EL_M150_leds_gpio),
+ EL_M150_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, EL_M150_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(EL_M150_gpio_keys),
+ EL_M150_gpio_keys);
+
+ gpio_request_one(EL_M150_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_register_m25p80(&EL_M150_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_EL_M150, "EL-M150",
+ "EasyLink EL-M150", el_m150_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-mini.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-mini.c
new file mode 100644
index 0000000..aaccb0d
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-el-mini.c
@@ -0,0 +1,86 @@
+/*
+ * Easy-Link EL-MINI board support
+ *
+ * Copyright (C) 2012 huangfc <***@163.com>
+ * Copyright (C) 2011 hys <***@qq.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MINI_GPIO_LED_SYSTEM 27
+#define MINI_GPIO_BTN_RESET 11
+
+#define MINI_GPIO_USB_POWER 8
+
+#define MINI_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MINI_KEYS_DEBOUNCE_INTERVAL (3 * MINI_KEYS_POLL_INTERVAL)
+
+static const char *mini_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data mini_flash_data = {
+ .part_probes = mini_part_probes,
+};
+
+static struct gpio_led mini_leds_gpio[] __initdata = {
+ {
+ .name = "ELINK:green:system",
+ .gpio = MINI_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button mini_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MINI_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MINI_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init el_mini_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&mini_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mini_leds_gpio),
+ mini_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, MINI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mini_gpio_keys),
+ mini_gpio_keys);
+
+ gpio_request_one(MINI_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_EL_MINI, "EL-MINI", "EasyLink EL-MINI",
+ el_mini_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-esr1750.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-esr1750.c
new file mode 100644
index 0000000..2a34b3a
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-esr1750.c
@@ -0,0 +1,176 @@
+/*
+ * EnGenius ESR1750 board support
+ *
+ * Copyright (c) 2014 Jon Suphammer <***@suphammer.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define ESR1750_GPIO_LED_WLAN_5G 23
+#define ESR1750_GPIO_LED_WLAN_2G 13
+#define ESR1750_GPIO_LED_POWER_AMBER 2
+#define ESR1750_GPIO_LED_WPS_AMBER 22
+#define ESR1750_GPIO_LED_WPS_BLUE 19
+
+#define ESR1750_GPIO_BTN_WPS 16
+#define ESR1750_GPIO_BTN_RESET 17
+
+#define ESR1750_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ESR1750_KEYS_DEBOUNCE_INTERVAL (3 * ESR1750_KEYS_POLL_INTERVAL)
+
+#define ESR1750_CALDATA_ADDR 0x1fff0000
+#define ESR1750_WMAC_CALDATA_OFFSET 0x1000
+#define ESR1750_PCIE_CALDATA_OFFSET 0x5000
+
+#define ESR1750_NVRAM_ADDR 0x1f030000
+#define ESR1750_NVRAM_SIZE 0x10000
+
+static struct gpio_led esr1750_leds_gpio[] __initdata = {
+ {
+ .name = "esr1750:amber:power",
+ .gpio = ESR1750_GPIO_LED_POWER_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "esr1750:blue:wps",
+ .gpio = ESR1750_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ },
+ {
+ .name = "esr1750:amber:wps",
+ .gpio = ESR1750_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "esr1750:blue:wlan-2g",
+ .gpio = ESR1750_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "esr1750:blue:wlan-5g",
+ .gpio = ESR1750_GPIO_LED_WLAN_5G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button esr1750_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ESR1750_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ESR1750_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg esr1750_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data esr1750_ar8327_data = {
+ .pad0_cfg = &esr1750_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info esr1750_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &esr1750_ar8327_data,
+ },
+};
+
+static int esr1750_get_mac(const char *name, char *mac)
+{
+ u8 *nvram = (u8 *) KSEG1ADDR(ESR1750_NVRAM_ADDR);
+ int err;
+
+ err = ath79_nvram_parse_mac_addr(nvram, ESR1750_NVRAM_SIZE,
+ name, mac);
+ if (err) {
+ pr_err("no MAC address found for %s\n", name);
+ return false;
+ }
+
+ return true;
+}
+
+static void __init esr1750_setup(void)
+{
+ u8 *caldata = (u8 *) KSEG1ADDR(ESR1750_CALDATA_ADDR);
+ u8 mac1[ETH_ALEN];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(esr1750_leds_gpio),
+ esr1750_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, ESR1750_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(esr1750_gpio_keys),
+ esr1750_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(esr1750_mdio0_info,
+ ARRAY_SIZE(esr1750_mdio0_info));
+
+ /* GMAC0 is connected to an QCA8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ if (esr1750_get_mac("ethaddr=", mac1))
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+ ath79_register_eth(0);
+
+ ath79_register_wmac(caldata + ESR1750_WMAC_CALDATA_OFFSET, mac1);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_ESR1750, "ESR1750",
+ "EnGenius ESR1750",
+ esr1750_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ew-dorin.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ew-dorin.c
new file mode 100644
index 0000000..47ed51b
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ew-dorin.c
@@ -0,0 +1,144 @@
+/*
+ * EW Dorin board support
+ * (based on Atheros Ref. Design AP121)
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2012 Embedded Wireless GmbH www.80211.de
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DORIN_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DORIN_KEYS_DEBOUNCE_INTERVAL (3 * DORIN_KEYS_POLL_INTERVAL)
+
+#define DORIN_CALDATA_OFFSET 0x1000
+#define DORIN_WMAC_MAC_OFFSET 0x1002
+
+#define DORIN_GPIO_LED_21 21
+#define DORIN_GPIO_LED_22 22
+
+#define DORIN_GPIO_BTN_JUMPSTART 11
+#define DORIN_GPIO_BTN_RESET 6
+
+static struct gpio_led dorin_leds_gpio[] __initdata = {
+ {
+ .name = "dorin:green:led21",
+ .gpio = DORIN_GPIO_LED_21,
+ .active_low = 1,
+ },
+ {
+ .name = "dorin:green:led22",
+ .gpio = DORIN_GPIO_LED_22,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button dorin_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DORIN_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DORIN_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init ew_dorin_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ static u8 mac[6];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_usb();
+
+ if (ar93xx_wmac_read_mac_address(mac)) {
+ ath79_register_wmac(NULL, NULL);
+ } else {
+ ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
+ art + DORIN_WMAC_MAC_OFFSET);
+ memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
+ }
+
+ mac[3] |= 0x40;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
+ dorin_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dorin_gpio_keys),
+ dorin_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_EW_DORIN, "EW-DORIN", "EmbWir-Dorin",
+ ew_dorin_setup);
+
+
+static void __init ew_dorin_router_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ static u8 mac[6];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_usb();
+
+ if (ar93xx_wmac_read_mac_address(mac)) {
+ ath79_register_wmac(NULL, NULL);
+ } else {
+ ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
+ art + DORIN_WMAC_MAC_OFFSET);
+ memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
+ }
+
+ mac[3] |= 0x40;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ mac[3] &= 0x3F;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_setup_ar933x_phy4_switch(true, true);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
+ dorin_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dorin_gpio_keys),
+ dorin_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_EW_DORIN_ROUTER, "EW-DORIN-ROUTER",
+ "EmbWir-Dorin-Router", ew_dorin_router_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gl-inet.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gl-inet.c
new file mode 100644
index 0000000..ef1b54f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gl-inet.c
@@ -0,0 +1,104 @@
+/*
+ * GL-CONNECT iNet board support
+ *
+ * Copyright (C) 2011 dongyuqi <***@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2013 alzhao <***@gmail.com>
+ * Copyright (C) 2014 Michel Stempin <***@wanadoo.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define GL_INET_GPIO_LED_WLAN 0
+#define GL_INET_GPIO_LED_LAN 13
+#define GL_INET_GPIO_BTN_RESET 11
+
+#define GL_INET_KEYS_POLL_INTERVAL 20 /* msecs */
+#define GL_INET_KEYS_DEBOUNCE_INTERVAL (3 * GL_INET_KEYS_POLL_INTERVAL)
+
+static const char * gl_inet_part_probes[] = {
+ "tp-link", /* dont change, this will use tplink parser */
+ NULL ,
+};
+
+static struct flash_platform_data gl_inet_flash_data = {
+ .part_probes = gl_inet_part_probes,
+};
+
+static struct gpio_led gl_inet_leds_gpio[] __initdata = {
+ {
+ .name = "gl-connect:red:wireless",
+ .gpio = GL_INET_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "gl-connect:green:lan",
+ .gpio = GL_INET_GPIO_LED_LAN,
+ .active_low = 0,
+ .default_state = 1,
+ },
+};
+
+static struct gpio_keys_button gl_inet_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = GL_INET_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GL_INET_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init gl_inet_setup(void)
+{
+ /* get the mac address which is stored in the 1st 64k uboot MTD */
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ /* get the art address, which is the last 64K. By using
+ 0x1fff1000, it doesn't matter it is 4M, 8M or 16M flash */
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ /* register flash. MTD will use tp-link parser to parser MTD */
+ ath79_register_m25p80(&gl_inet_flash_data);
+
+ /* register gpio LEDs and keys */
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_inet_leds_gpio),
+ gl_inet_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, GL_INET_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(gl_inet_gpio_keys),
+ gl_inet_gpio_keys);
+
+ /* enable usb */
+ ath79_register_usb();
+
+ /* register eth0 as WAN, eth1 as LAN */
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ /* register wireless mac with cal data */
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_INET, "GL-INET", "GL-CONNECT INET v1",
+ gl_inet_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gs-oolite.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gs-oolite.c
new file mode 100644
index 0000000..3d85f24
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-gs-oolite.c
@@ -0,0 +1,103 @@
+/*
+ * Oolite board support
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
+
+#define GS_OOLITE_GPIO_BTN6 6
+#define GS_OOLITE_GPIO_BTN7 7
+#define GS_OOLITE_GPIO_BTN_RESET 11
+
+#define GS_OOLITE_GPIO_LED_SYSTEM 27
+
+#define GS_OOLITE_KEYS_POLL_INTERVAL 20 /* msecs */
+#define GS_OOLITE_KEYS_DEBOUNCE_INTERVAL (3 * GS_OOLITE_KEYS_POLL_INTERVAL)
+
+static const char *gs_oolite_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data gs_oolite_flash_data = {
+ .part_probes = gs_oolite_part_probes,
+};
+
+static struct gpio_led gs_oolite_leds_gpio[] __initdata = {
+ {
+ .name = "oolite:red:system",
+ .gpio = GS_OOLITE_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button gs_oolite_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = GS_OOLITE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GS_OOLITE_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "BTN_6",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = GS_OOLITE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GS_OOLITE_GPIO_BTN6,
+ .active_low = 1,
+ },
+ {
+ .desc = "BTN_7",
+ .type = EV_KEY,
+ .code = BTN_7,
+ .debounce_interval = GS_OOLITE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GS_OOLITE_GPIO_BTN7,
+ .active_low = 1,
+ },
+};
+
+static void __init gs_oolite_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_leds_gpio),
+ gs_oolite_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, GS_OOLITE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(gs_oolite_gpio_keys),
+ gs_oolite_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(&gs_oolite_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_GS_OOLITE, "GS-OOLITE",
+ "Oolite V1.0", gs_oolite_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hiwifi-hc6361.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hiwifi-hc6361.c
new file mode 100644
index 0000000..6600595
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hiwifi-hc6361.c
@@ -0,0 +1,115 @@
+/*
+ * HiWiFi HC6361 board support
+ *
+ * Copyright (C) 2012-2013 eric
+ * Copyright (C) 2014 Yousong Zhou <***@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/proc_fs.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define HIWIFI_HC6361_GPIO_LED_WLAN_2P4 0 /* 2.4G WLAN LED */
+#define HIWIFI_HC6361_GPIO_LED_SYSTEM 1 /* System LED */
+#define HIWIFI_HC6361_GPIO_LED_INTERNET 27 /* Internet LED */
+
+#define HIWIFI_HC6361_GPIO_USBPOWER 20 /* USB power control */
+#define HIWIFI_HC6361_GPIO_BTN_RST 11 /* Reset button */
+
+#define HIWIFI_HC6361_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL \
+ (3 * HIWIFI_HC6361_KEYS_POLL_INTERVAL)
+
+static struct gpio_led hiwifi_leds_gpio[] __initdata = {
+ {
+ .name = "hiwifi:blue:wlan-2p4",
+ .gpio = HIWIFI_HC6361_GPIO_LED_WLAN_2P4,
+ .active_low = 1,
+ }, {
+ .name = "hiwifi:blue:system",
+ .gpio = HIWIFI_HC6361_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "hiwifi:blue:internet",
+ .gpio = HIWIFI_HC6361_GPIO_LED_INTERNET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button hiwifi_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = HIWIFI_HC6361_GPIO_BTN_RST,
+ .active_low = 1,
+ }
+};
+
+static void __init get_mac_from_bdinfo(u8 *mac, void *bdinfo)
+{
+ if (sscanf(bdinfo, "fac_mac = %2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx",
+ &mac[0], &mac[1], &mac[2], &mac[3],
+ &mac[4], &mac[5]) == 6) {
+ return;
+ }
+
+ printk(KERN_WARNING "Parsing MAC address failed.\n");
+ memcpy(mac, "\x00\xba\xbe\x00\x00\x00", 6);
+}
+
+static void __init hiwifi_hc6361_setup(void)
+{
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_m25p80(NULL);
+ ath79_gpio_function_enable(
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(hiwifi_leds_gpio),
+ hiwifi_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, HIWIFI_HC6361_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(hiwifi_gpio_keys),
+ hiwifi_gpio_keys);
+ gpio_request_one(HIWIFI_HC6361_GPIO_USBPOWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ get_mac_from_bdinfo(mac, (void *) KSEG1ADDR(0x1f010180));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_HIWIFI_HC6361, "HiWiFi-HC6361",
+ "HiWiFi HC6361", hiwifi_hc6361_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hornet-ub.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hornet-ub.c
new file mode 100644
index 0000000..d2cfb09
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-hornet-ub.c
@@ -0,0 +1,137 @@
+/*
+ * ALFA NETWORKS Hornet-UB board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define HORNET_UB_GPIO_LED_WLAN 0
+#define HORNET_UB_GPIO_LED_USB 1
+#define HORNET_UB_GPIO_LED_LAN 13
+#define HORNET_UB_GPIO_LED_WAN 17
+#define HORNET_UB_GPIO_LED_WPS 27
+
+#define HORNET_UB_GPIO_BTN_RESET 11
+#define HORNET_UB_GPIO_BTN_WPS 12
+
+#define HORNET_UB_GPIO_USB_POWER 26
+
+#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL)
+
+#define HORNET_UB_MAC0_OFFSET 0x0000
+#define HORNET_UB_MAC1_OFFSET 0x0006
+#define HORNET_UB_CALDATA_OFFSET 0x1000
+
+static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
+ {
+ .name = "alfa:blue:lan",
+ .gpio = HORNET_UB_GPIO_LED_LAN,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:usb",
+ .gpio = HORNET_UB_GPIO_LED_USB,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:wan",
+ .gpio = HORNET_UB_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "alfa:blue:wlan",
+ .gpio = HORNET_UB_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:wps",
+ .gpio = HORNET_UB_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = HORNET_UB_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = HORNET_UB_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init hornet_ub_gpio_setup(void)
+{
+ u32 t;
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
+
+ gpio_request_one(HORNET_UB_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+}
+
+static void __init hornet_ub_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ hornet_ub_gpio_setup();
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio),
+ hornet_ub_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(hornet_ub_gpio_keys),
+ hornet_ub_gpio_keys);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + HORNET_UB_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + HORNET_UB_MAC1_OFFSET, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB",
+ hornet_ub_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ja76pf.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ja76pf.c
new file mode 100644
index 0000000..d1fe0f8
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ja76pf.c
@@ -0,0 +1,190 @@
+/*
+ * jjPlus JA76PF board support
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */
+#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL)
+
+#define JA76PF_GPIO_I2C_SCL 0
+#define JA76PF_GPIO_I2C_SDA 1
+#define JA76PF_GPIO_LED_1 5
+#define JA76PF_GPIO_LED_2 4
+#define JA76PF_GPIO_LED_3 3
+#define JA76PF_GPIO_BTN_RESET 11
+
+static struct gpio_led ja76pf_leds_gpio[] __initdata = {
+ {
+ .name = "jjplus:green:led1",
+ .gpio = JA76PF_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "jjplus:green:led2",
+ .gpio = JA76PF_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "jjplus:green:led3",
+ .gpio = JA76PF_GPIO_LED_3,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JA76PF_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
+ .sda_pin = JA76PF_GPIO_I2C_SDA,
+ .scl_pin = JA76PF_GPIO_I2C_SCL,
+};
+
+static struct platform_device ja76pf_i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ja76pf_i2c_gpio_data,
+ }
+};
+
+static const char *ja76pf_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data ja76pf_flash_data = {
+ .part_probes = ja76pf_part_probes,
+};
+
+#define JA76PF_WAN_PHYMASK (1 << 4)
+#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
+#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
+
+static void __init ja76pf_init(void)
+{
+ ath79_register_m25p80(&ja76pf_flash_data);
+
+ ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ platform_device_register(&ja76pf_i2c_gpio_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
+ ja76pf_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ja76pf_gpio_keys),
+ ja76pf_gpio_keys);
+
+ ath79_register_usb();
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);
+
+#define JA76PF2_GPIO_LED_D2 5
+#define JA76PF2_GPIO_LED_D3 4
+#define JA76PF2_GPIO_LED_D4 3
+#define JA76PF2_GPIO_BTN_RESET 7
+#define JA76PF2_GPIO_BTN_WPS 8
+
+static struct gpio_led ja76pf2_leds_gpio[] __initdata = {
+ {
+ .name = "jjplus:green:led1",
+ .gpio = JA76PF2_GPIO_LED_D2,
+ .active_low = 1,
+ }, {
+ .name = "jjplus:green:led2",
+ .gpio = JA76PF2_GPIO_LED_D3,
+ .active_low = 0,
+ }, {
+ .name = "jjplus:green:led3",
+ .gpio = JA76PF2_GPIO_LED_D4,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button ja76pf2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JA76PF2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JA76PF2_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+#define JA76PF2_LAN_PHYMASK BIT(0)
+#define JA76PF2_WAN_PHYMASK BIT(4)
+#define JA76PF2_MDIO_PHYMASK (JA76PF2_LAN_PHYMASK | JA76PF2_WAN_PHYMASK)
+
+static void __init ja76pf2_init(void)
+{
+ ath79_register_m25p80(&ja76pf_flash_data);
+
+ ath79_register_mdio(0, ~JA76PF2_MDIO_PHYMASK);
+
+ /* MAC0 is connected to the CPU port of the AR8316 switch */
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ /* MAC1 is connected to the PHY4 of the AR8316 switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf2_leds_gpio),
+ ja76pf2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ja76pf2_gpio_keys),
+ ja76pf2_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JA76PF2, "JA76PF2", "jjPlus JA76PF2", ja76pf2_init);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-jwap003.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-jwap003.c
new file mode 100644
index 0000000..a3c93cc
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-jwap003.c
@@ -0,0 +1,95 @@
+/*
+ * jjPlus JWAP003 board support
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */
+#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL)
+
+#define JWAP003_GPIO_WPS 11
+#define JWAP003_GPIO_I2C_SCL 0
+#define JWAP003_GPIO_I2C_SDA 1
+
+static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JWAP003_GPIO_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
+ .sda_pin = JWAP003_GPIO_I2C_SDA,
+ .scl_pin = JWAP003_GPIO_I2C_SCL,
+};
+
+static struct platform_device jwap003_i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &jwap003_i2c_gpio_data,
+ }
+};
+
+static const char *jwap003_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data jwap003_flash_data = {
+ .part_probes = jwap003_part_probes,
+};
+
+#define JWAP003_WAN_PHYMASK BIT(0)
+#define JWAP003_LAN_PHYMASK BIT(4)
+
+static void __init jwap003_init(void)
+{
+ ath79_register_m25p80(&jwap003_flash_data);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ platform_device_register(&jwap003_i2c_gpio_device);
+
+ ath79_register_usb();
+
+ ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(jwap003_gpio_keys),
+ jwap003_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mr600.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mr600.c
new file mode 100644
index 0000000..4969564
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mr600.c
@@ -0,0 +1,176 @@
+/*
+ * OpenMesh OM2P board support
+ *
+ * Copyright (C) 2012 Marek Lindner <***@open-mesh.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MR600_GPIO_LED_WLAN58 12
+#define MR600_GPIO_LED_WPS 13
+#define MR600_GPIO_LED_POWER 14
+
+#define MR600V2_GPIO_LED_WLAN58_RED 12
+#define MR600V2_GPIO_LED_WPS 13
+#define MR600V2_GPIO_LED_POWER 14
+#define MR600V2_GPIO_LED_WLAN24_GREEN 18
+#define MR600V2_GPIO_LED_WLAN24_YELLOW 19
+#define MR600V2_GPIO_LED_WLAN24_RED 20
+#define MR600V2_GPIO_LED_WLAN58_GREEN 21
+#define MR600V2_GPIO_LED_WLAN58_YELLOW 22
+
+#define MR600_GPIO_BTN_RESET 17
+
+#define MR600_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MR600_KEYS_DEBOUNCE_INTERVAL (3 * MR600_KEYS_POLL_INTERVAL)
+
+#define MR600_MAC_OFFSET 0
+#define MR600_WMAC_CALDATA_OFFSET 0x1000
+#define MR600_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led mr600_leds_gpio[] __initdata = {
+ {
+ .name = "mr600:orange:power",
+ .gpio = MR600_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:blue:wps",
+ .gpio = MR600_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:green:wlan58",
+ .gpio = MR600_GPIO_LED_WLAN58,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led mr600v2_leds_gpio[] __initdata = {
+ {
+ .name = "mr600:blue:power",
+ .gpio = MR600V2_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:blue:wps",
+ .gpio = MR600V2_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:red:wlan24",
+ .gpio = MR600V2_GPIO_LED_WLAN24_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:yellow:wlan24",
+ .gpio = MR600V2_GPIO_LED_WLAN24_YELLOW,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:green:wlan24",
+ .gpio = MR600V2_GPIO_LED_WLAN24_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:red:wlan58",
+ .gpio = MR600V2_GPIO_LED_WLAN58_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:yellow:wlan58",
+ .gpio = MR600V2_GPIO_LED_WLAN58_YELLOW,
+ .active_low = 1,
+ },
+ {
+ .name = "mr600:green:wlan58",
+ .gpio = MR600V2_GPIO_LED_WLAN58_GREEN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button mr600_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MR600_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MR600_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init mr600_base_setup(unsigned num_leds, struct gpio_led *leds)
+{
+ u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
+ u8 mac[6];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, num_leds, leds);
+ ath79_register_gpio_keys_polled(-1, MR600_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mr600_gpio_keys),
+ mr600_gpio_keys);
+
+ ath79_init_mac(mac, art + MR600_MAC_OFFSET, 1);
+ ath79_register_wmac(art + MR600_WMAC_CALDATA_OFFSET, mac);
+
+ ath79_init_mac(mac, art + MR600_MAC_OFFSET, 8);
+ ap91_pci_init(art + MR600_PCIE_CALDATA_OFFSET, mac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + MR600_MAC_OFFSET, 0);
+
+ /* GMAC0 is connected to an external PHY */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
+static void __init mr600_setup(void)
+{
+ mr600_base_setup(ARRAY_SIZE(mr600_leds_gpio), mr600_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_MR600, "MR600", "OpenMesh MR600", mr600_setup);
+
+static void __init mr600v2_setup(void)
+{
+ mr600_base_setup(ARRAY_SIZE(mr600v2_leds_gpio), mr600v2_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_MR600V2, "MR600v2", "OpenMesh MR600v2", mr600v2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n600.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n600.c
new file mode 100644
index 0000000..a87413d
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n600.c
@@ -0,0 +1,202 @@
+/*
+ * WD My Net N600 board support
+ *
+ * Copyright (C) 2013 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define MYNET_N600_GPIO_LED_WIFI 0
+#define MYNET_N600_GPIO_LED_POWER 11
+#define MYNET_N600_GPIO_LED_INTERNET 12
+#define MYNET_N600_GPIO_LED_WPS 13
+
+#define MYNET_N600_GPIO_LED_LAN1 4
+#define MYNET_N600_GPIO_LED_LAN2 3
+#define MYNET_N600_GPIO_LED_LAN3 2
+#define MYNET_N600_GPIO_LED_LAN4 1
+
+#define MYNET_N600_GPIO_BTN_RESET 16
+#define MYNET_N600_GPIO_BTN_WPS 17
+
+#define MYNET_N600_GPIO_EXTERNAL_LNA0 14
+#define MYNET_N600_GPIO_EXTERNAL_LNA1 15
+
+#define MYNET_N600_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MYNET_N600_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N600_KEYS_POLL_INTERVAL)
+
+#define MYNET_N600_MAC0_OFFSET 0
+#define MYNET_N600_MAC1_OFFSET 6
+#define MYNET_N600_WMAC_CALDATA_OFFSET 0x1000
+#define MYNET_N600_PCIE_CALDATA_OFFSET 0x5000
+
+#define MYNET_N600_NVRAM_ADDR 0x1f058010
+#define MYNET_N600_NVRAM_SIZE 0x7ff0
+
+static struct gpio_led mynet_n600_leds_gpio[] __initdata = {
+ {
+ .name = "wd:blue:power",
+ .gpio = MYNET_N600_GPIO_LED_POWER,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:blue:wps",
+ .gpio = MYNET_N600_GPIO_LED_WPS,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:blue:wireless",
+ .gpio = MYNET_N600_GPIO_LED_WIFI,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:blue:internet",
+ .gpio = MYNET_N600_GPIO_LED_INTERNET,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:green:lan1",
+ .gpio = MYNET_N600_GPIO_LED_LAN1,
+ .active_low = 1,
+ },
+ {
+ .name = "wd:green:lan2",
+ .gpio = MYNET_N600_GPIO_LED_LAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "wd:green:lan3",
+ .gpio = MYNET_N600_GPIO_LED_LAN3,
+ .active_low = 1,
+ },
+ {
+ .name = "wd:green:lan4",
+ .gpio = MYNET_N600_GPIO_LED_LAN4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button mynet_n600_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MYNET_N600_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MYNET_N600_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static void mynet_n600_get_mac(const char *name, char *mac)
+{
+ u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N600_NVRAM_ADDR);
+ int err;
+
+ err = ath79_nvram_parse_mac_addr(nvram, MYNET_N600_NVRAM_SIZE,
+ name, mac);
+ if (err)
+ pr_err("no MAC address found for %s\n", name);
+}
+
+#define MYNET_N600_WAN_PHY_MASK BIT(0)
+
+static void __init mynet_n600_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN1,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN2,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN3,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN4,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_N600_GPIO_LED_INTERNET,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n600_leds_gpio),
+ mynet_n600_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MYNET_N600_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mynet_n600_gpio_keys),
+ mynet_n600_gpio_keys);
+
+ /*
+ * Control signal for external LNAs 0 and 1
+ * Taken from GPL bootloader source:
+ * board/ar7240/db12x/alpha_gpio.c
+ */
+ ath79_wmac_set_ext_lna_gpio(0, MYNET_N600_GPIO_EXTERNAL_LNA0);
+ ath79_wmac_set_ext_lna_gpio(1, MYNET_N600_GPIO_EXTERNAL_LNA1);
+
+ mynet_n600_get_mac("wlan24mac=", tmpmac);
+ ath79_register_wmac(art + MYNET_N600_WMAC_CALDATA_OFFSET, tmpmac);
+
+ mynet_n600_get_mac("wlan5mac=", tmpmac);
+ ap91_pci_init(art + MYNET_N600_PCIE_CALDATA_OFFSET, tmpmac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
+ AR934X_ETH_CFG_SW_PHY_SWAP);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* LAN */
+ mynet_n600_get_mac("lanmac=", ath79_eth1_data.mac_addr);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+
+ ath79_register_eth(1);
+
+ /* WAN */
+ mynet_n600_get_mac("wanmac=", ath79_eth0_data.mac_addr);
+
+ /* GMAC0 is connected to the PHY4 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = MYNET_N600_WAN_PHY_MASK;
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = MYNET_N600_WAN_PHY_MASK;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_MYNET_N600, "MYNET-N600", "WD My Net N600",
+ mynet_n600_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n750.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n750.c
new file mode 100644
index 0000000..9d69dc5
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-n750.c
@@ -0,0 +1,226 @@
+/*
+ * WD My Net N750 board support
+ *
+ * Copyright (C) 2013 Felix Kaechele <***@fetzig.org>
+ * Copyright (C) 2013 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+
+/*
+ * Taken from GPL bootloader source:
+ * board/ar7240/db12x/alpha_gpio.c
+ */
+#define MYNET_N750_GPIO_LED_WIFI 11
+#define MYNET_N750_GPIO_LED_INTERNET 12
+#define MYNET_N750_GPIO_LED_WPS 13
+#define MYNET_N750_GPIO_LED_POWER 14
+
+#define MYNET_N750_GPIO_BTN_RESET 17
+#define MYNET_N750_GPIO_BTN_WPS 19
+
+#define MYNET_N750_GPIO_EXTERNAL_LNA0 15
+#define MYNET_N750_GPIO_EXTERNAL_LNA1 18
+
+#define MYNET_N750_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MYNET_N750_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N750_KEYS_POLL_INTERVAL)
+
+#define MYNET_N750_WMAC_CALDATA_OFFSET 0x1000
+#define MYNET_N750_PCIE_CALDATA_OFFSET 0x5000
+
+#define MYNET_N750_NVRAM_ADDR 0x1f058010
+#define MYNET_N750_NVRAM_SIZE 0x7ff0
+
+static struct gpio_led mynet_n750_leds_gpio[] __initdata = {
+ {
+ .name = "wd:blue:power",
+ .gpio = MYNET_N750_GPIO_LED_POWER,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:blue:wps",
+ .gpio = MYNET_N750_GPIO_LED_WPS,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:blue:wireless",
+ .gpio = MYNET_N750_GPIO_LED_WIFI,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:blue:internet",
+ .gpio = MYNET_N750_GPIO_LED_INTERNET,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button mynet_n750_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MYNET_N750_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MYNET_N750_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static const struct ar8327_led_info mynet_n750_leds_ar8327[] __initconst = {
+ AR8327_LED_INFO(PHY0_0, HW, "wd:green:lan1"),
+ AR8327_LED_INFO(PHY1_0, HW, "wd:green:lan2"),
+ AR8327_LED_INFO(PHY2_0, HW, "wd:green:lan3"),
+ AR8327_LED_INFO(PHY3_0, HW, "wd:green:lan4"),
+ AR8327_LED_INFO(PHY4_0, HW, "wd:green:wan"),
+ AR8327_LED_INFO(PHY0_1, HW, "wd:yellow:lan1"),
+ AR8327_LED_INFO(PHY1_1, HW, "wd:yellow:lan2"),
+ AR8327_LED_INFO(PHY2_1, HW, "wd:yellow:lan3"),
+ AR8327_LED_INFO(PHY3_1, HW, "wd:yellow:lan4"),
+ AR8327_LED_INFO(PHY4_1, HW, "wd:yellow:wan"),
+};
+
+static struct ar8327_pad_cfg mynet_n750_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg mynet_n750_ar8327_led_cfg = {
+ .led_ctrl0 = 0xcc35cc35,
+ .led_ctrl1 = 0xca35ca35,
+ .led_ctrl2 = 0xc935c935,
+ .led_ctrl3 = 0x03ffff00,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data mynet_n750_ar8327_data = {
+ .pad0_cfg = &mynet_n750_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &mynet_n750_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(mynet_n750_leds_ar8327),
+ .leds = mynet_n750_leds_ar8327,
+};
+
+static struct mdio_board_info mynet_n750_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &mynet_n750_ar8327_data,
+ },
+};
+
+static void mynet_n750_get_mac(const char *name, char *mac)
+{
+ u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N750_NVRAM_ADDR);
+ int err;
+
+ err = ath79_nvram_parse_mac_addr(nvram, MYNET_N750_NVRAM_SIZE,
+ name, mac);
+ if (err)
+ pr_err("no MAC address found for %s\n", name);
+}
+
+/*
+ * The bootloader on this board powers down all PHYs on the switch
+ * before booting the kernel. We bring all PHYs back up so that they are
+ * discoverable by the mdio bus scan and the switch is detected
+ * correctly.
+ */
+static void mynet_n750_mdio_fixup(struct mii_bus *bus)
+{
+ int i;
+
+ for (i = 0; i < 5; i++)
+ bus->write(bus, i, MII_BMCR,
+ (BMCR_RESET | BMCR_ANENABLE | BMCR_SPEED1000));
+
+ mdelay(1000);
+}
+
+static void __init mynet_n750_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n750_leds_gpio),
+ mynet_n750_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, MYNET_N750_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mynet_n750_gpio_keys),
+ mynet_n750_gpio_keys);
+ /*
+ * Control signal for external LNAs 0 and 1
+ * Taken from GPL bootloader source:
+ * board/ar7240/db12x/alpha_gpio.c
+ */
+ ath79_wmac_set_ext_lna_gpio(0, MYNET_N750_GPIO_EXTERNAL_LNA0);
+ ath79_wmac_set_ext_lna_gpio(1, MYNET_N750_GPIO_EXTERNAL_LNA1);
+
+ mynet_n750_get_mac("wlan24mac=", tmpmac);
+ ath79_register_wmac(art + MYNET_N750_WMAC_CALDATA_OFFSET, tmpmac);
+
+ mynet_n750_get_mac("wlan5mac=", tmpmac);
+ ap91_pci_init(art + MYNET_N750_PCIE_CALDATA_OFFSET, tmpmac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(mynet_n750_mdio0_info,
+ ARRAY_SIZE(mynet_n750_mdio0_info));
+
+ ath79_mdio0_data.reset = mynet_n750_mdio_fixup;
+ ath79_register_mdio(0, 0x0);
+
+ mynet_n750_get_mac("lanmac=", ath79_eth0_data.mac_addr);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_MYNET_N750, "MYNET-N750", "WD My Net N750",
+ mynet_n750_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-rext.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-rext.c
new file mode 100644
index 0000000..a3deed5
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mynet-rext.c
@@ -0,0 +1,178 @@
+/*
+ * WD My Net WI-FI Range Extender (Codename:Starfish db12x) board support
+ *
+ * Copyright (C) 2013 Christian Lamparter <***@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define MYNET_REXT_GPIO_LED_POWER 11
+#define MYNET_REXT_GPIO_LED_ETHERNET 12
+#define MYNET_REXT_GPIO_LED_WIFI 19
+
+#define MYNET_REXT_GPIO_LED_RF_QTY1 20
+#define MYNET_REXT_GPIO_LED_RF_QTY2 21
+#define MYNET_REXT_GPIO_LED_RF_QTY3 22
+
+#define MYNET_REXT_GPIO_BTN_RESET 13
+#define MYNET_REXT_GPIO_BTN_WPS 15
+#define MYNET_REXT_GPIO_SW_RF 14
+
+#define MYNET_REXT_GPIO_PHY_SWRST 16 /* disables Ethernet PHY */
+#define MYNET_REXT_GPIO_PHY_INT 17
+#define MYNET_REXT_GPIO_18 18
+
+#define MYNET_REXT_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MYNET_REXT_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_REXT_KEYS_POLL_INTERVAL)
+
+#define MYNET_REXT_WMAC_CALDATA_OFFSET 0x1000
+
+#define MYNET_REXT_NVRAM_ADDR 0x1f7e0010
+#define MYNET_REXT_NVRAM_SIZE 0xfff0
+
+#define MYNET_REXT_ART_ADDR 0x1f7f0000
+
+static struct gpio_led mynet_rext_leds_gpio[] __initdata = {
+ {
+ .name = "wd:blue:power",
+ .gpio = MYNET_REXT_GPIO_LED_POWER,
+ .active_low = 0,
+ },
+ {
+ .name = "wd:blue:wireless",
+ .gpio = MYNET_REXT_GPIO_LED_WIFI,
+ .active_low = 1,
+ },
+ {
+ .name = "wd:blue:ethernet",
+ .gpio = MYNET_REXT_GPIO_LED_ETHERNET,
+ .active_low = 1,
+ },
+ {
+ .name = "wd:blue:quality1",
+ .gpio = MYNET_REXT_GPIO_LED_RF_QTY1,
+ .active_low = 1,
+ },
+ {
+ .name = "wd:blue:quality2",
+ .gpio = MYNET_REXT_GPIO_LED_RF_QTY2,
+ .active_low = 1,
+ },
+ {
+ .name = "wd:blue:quality3",
+ .gpio = MYNET_REXT_GPIO_LED_RF_QTY3,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button mynet_rext_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MYNET_REXT_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MYNET_REXT_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RF Band switch",
+ .type = EV_SW,
+ .code = BTN_1,
+ .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MYNET_REXT_GPIO_SW_RF,
+ },
+};
+
+static void mynet_rext_get_mac(const char *name, char *mac)
+{
+ u8 *nvram = (u8 *) KSEG1ADDR(MYNET_REXT_NVRAM_ADDR);
+ int err;
+
+ err = ath79_nvram_parse_mac_addr(nvram, MYNET_REXT_NVRAM_SIZE,
+ name, mac);
+ if (err)
+ pr_err("no MAC address found for %s\n", name);
+}
+
+static void __init mynet_rext_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(MYNET_REXT_ART_ADDR);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(NULL);
+
+ /* GPIO configuration from drivers/char/GPIO8.c */
+
+ ath79_gpio_output_select(MYNET_REXT_GPIO_LED_POWER,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_REXT_GPIO_LED_WIFI,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY1,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY2,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY3,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(MYNET_REXT_GPIO_LED_ETHERNET,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_rext_leds_gpio),
+ mynet_rext_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MYNET_REXT_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mynet_rext_gpio_keys),
+ mynet_rext_gpio_keys);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_RXD_DELAY |
+ AR934X_ETH_CFG_RDV_DELAY);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN */
+ mynet_rext_get_mac("et0macaddr=", ath79_eth0_data.mac_addr);
+
+ /* GMAC0 is connected to an external PHY on Port 4 */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+
+ /* WLAN */
+ mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
+ ap91_pci_init(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
+}
+
+MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT",
+ "WD My Net Wi-Fi Range Extender", mynet_rext_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w04nu.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w04nu.c
new file mode 100644
index 0000000..c2460ce
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w04nu.c
@@ -0,0 +1,124 @@
+/*
+ * Planex MZK-W04NU board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MZK_W04NU_GPIO_LED_USB 0
+#define MZK_W04NU_GPIO_LED_STATUS 1
+#define MZK_W04NU_GPIO_LED_WPS 3
+#define MZK_W04NU_GPIO_LED_WLAN 6
+#define MZK_W04NU_GPIO_LED_AP 15
+#define MZK_W04NU_GPIO_LED_ROUTER 16
+
+#define MZK_W04NU_GPIO_BTN_APROUTER 5
+#define MZK_W04NU_GPIO_BTN_WPS 12
+#define MZK_W04NU_GPIO_BTN_RESET 21
+
+#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL)
+
+static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
+ {
+ .name = "planex:green:status",
+ .gpio = MZK_W04NU_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "planex:blue:wps",
+ .gpio = MZK_W04NU_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:wlan",
+ .gpio = MZK_W04NU_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:usb",
+ .gpio = MZK_W04NU_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:ap",
+ .gpio = MZK_W04NU_GPIO_LED_AP,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:router",
+ .gpio = MZK_W04NU_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "aprouter",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_APROUTER,
+ .active_low = 0,
+ }
+};
+
+#define MZK_W04NU_WAN_PHYMASK BIT(4)
+#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK)
+
+static void __init mzk_w04nu_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, MZK_W04NU_MDIO_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
+ mzk_w04nu_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mzk_w04nu_gpio_keys),
+ mzk_w04nu_gpio_keys);
+ ath79_register_usb();
+
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
+ mzk_w04nu_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w300nh.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w300nh.c
new file mode 100644
index 0000000..8c40365
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-mzk-w300nh.c
@@ -0,0 +1,115 @@
+/*
+ * Planex MZK-W300NH board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MZK_W300NH_GPIO_LED_STATUS 1
+#define MZK_W300NH_GPIO_LED_WPS 3
+#define MZK_W300NH_GPIO_LED_WLAN 6
+#define MZK_W300NH_GPIO_LED_AP_GREEN 15
+#define MZK_W300NH_GPIO_LED_AP_AMBER 16
+
+#define MZK_W300NH_GPIO_BTN_APROUTER 5
+#define MZK_W300NH_GPIO_BTN_WPS 12
+#define MZK_W300NH_GPIO_BTN_RESET 21
+
+#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
+
+static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
+ {
+ .name = "planex:green:status",
+ .gpio = MZK_W300NH_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "planex:blue:wps",
+ .gpio = MZK_W300NH_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:wlan",
+ .gpio = MZK_W300NH_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:aprouter",
+ .gpio = MZK_W300NH_GPIO_LED_AP_GREEN,
+ }, {
+ .name = "planex:amber:aprouter",
+ .gpio = MZK_W300NH_GPIO_LED_AP_AMBER,
+ }
+};
+
+static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "aprouter",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_APROUTER,
+ .active_low = 0,
+ }
+};
+
+#define MZK_W300NH_WAN_PHYMASK BIT(4)
+#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK)
+
+static void __init mzk_w300nh_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
+ mzk_w300nh_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mzk_w300nh_gpio_keys),
+ mzk_w300nh_gpio_keys);
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
+ mzk_w300nh_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg460n.c
new file mode 100644
index 0000000..ca00777
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg460n.c
@@ -0,0 +1,220 @@
+/*
+ * Zyxel NBG 460N/550N/550NH board support
+ *
+ * Copyright (C) 2010 Michael Kurz <***@googlemail.com>
+ *
+ * based on mach-tl-wr1043nd.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+/* LEDs */
+#define NBG460N_GPIO_LED_WPS 3
+#define NBG460N_GPIO_LED_WAN 6
+#define NBG460N_GPIO_LED_POWER 14
+#define NBG460N_GPIO_LED_WLAN 15
+
+/* Buttons */
+#define NBG460N_GPIO_BTN_WPS 12
+#define NBG460N_GPIO_BTN_RESET 21
+
+#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL)
+
+/* RTC chip PCF8563 I2C interface */
+#define NBG460N_GPIO_PCF8563_SDA 8
+#define NBG460N_GPIO_PCF8563_SCK 7
+
+/* Switch configuration I2C interface */
+#define NBG460N_GPIO_RTL8366_SDA 16
+#define NBG460N_GPIO_RTL8366_SCK 18
+
+static struct mtd_partition nbg460n_partitions[] = {
+ {
+ .name = "Bootbase",
+ .offset = 0,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "U-Boot Config",
+ .offset = 0x010000,
+ .size = 0x030000,
+ }, {
+ .name = "U-Boot",
+ .offset = 0x040000,
+ .size = 0x030000,
+ }, {
+ .name = "linux",
+ .offset = 0x070000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x150000,
+ .size = 0x2a0000,
+ }, {
+ .name = "CalibData",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x070000,
+ .size = 0x380000,
+ }
+};
+
+static struct flash_platform_data nbg460n_flash_data = {
+ .parts = nbg460n_partitions,
+ .nr_parts = ARRAY_SIZE(nbg460n_partitions),
+};
+
+static struct gpio_led nbg460n_leds_gpio[] __initdata = {
+ {
+ .name = "nbg460n:green:power",
+ .gpio = NBG460N_GPIO_LED_POWER,
+ .active_low = 0,
+ .default_trigger = "default-on",
+ }, {
+ .name = "nbg460n:green:wps",
+ .gpio = NBG460N_GPIO_LED_WPS,
+ .active_low = 0,
+ }, {
+ .name = "nbg460n:green:wlan",
+ .gpio = NBG460N_GPIO_LED_WLAN,
+ .active_low = 0,
+ }, {
+ /* Not really for controlling the LED,
+ when set low the LED blinks uncontrollable */
+ .name = "nbg460n:green:wan",
+ .gpio = NBG460N_GPIO_LED_WAN,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG460N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG460N_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
+ .sda_pin = NBG460N_GPIO_PCF8563_SDA,
+ .scl_pin = NBG460N_GPIO_PCF8563_SCK,
+ .udelay = 10,
+};
+
+static struct platform_device nbg460n_i2c_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &nbg460n_i2c_device_platdata,
+ },
+};
+
+static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+static void nbg460n_i2c_init(void)
+{
+ /* The gpio interface */
+ platform_device_register(&nbg460n_i2c_device);
+ /* I2C devices */
+ i2c_register_board_info(0, nbg460n_i2c_devs,
+ ARRAY_SIZE(nbg460n_i2c_devs));
+}
+
+
+static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
+ .gpio_sda = NBG460N_GPIO_RTL8366_SDA,
+ .gpio_sck = NBG460N_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device nbg460n_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &nbg460n_rtl8366s_data,
+ }
+};
+
+static void __init nbg460n_setup(void)
+{
+ /* end of bootloader sector contains mac address */
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
+ /* last sector contains wlan calib data */
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* LAN Port */
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ /* WAN Port */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ /* register the switch phy */
+ platform_device_register(&nbg460n_rtl8366s_device);
+
+ /* register flash */
+ ath79_register_m25p80(&nbg460n_flash_data);
+
+ ath79_register_wmac(eeprom, mac);
+
+ /* register RTC chip */
+ nbg460n_i2c_init();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
+ nbg460n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(nbg460n_gpio_keys),
+ nbg460n_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
+ nbg460n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg6716.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg6716.c
new file mode 100644
index 0000000..e102f2c
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-nbg6716.c
@@ -0,0 +1,268 @@
+/*
+ * ZyXEL NBG6716 board support
+ *
+ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <***@openwrt.org>
+ * Copyright (c) 2013 Andre Valentin <***@marcant.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/platform/ar934x_nfc.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-nfc.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define NBG6716_GPIO_LED_INTERNET 18
+#define NBG6716_GPIO_LED_POWER 15
+#define NBG6716_GPIO_LED_USB0 4
+#define NBG6716_GPIO_LED_USB1 13
+#define NBG6716_GPIO_LED_WIFI2G 19
+#define NBG6716_GPIO_LED_WIFI5G 17
+#define NBG6716_GPIO_LED_WPS 21
+
+#define NBG6716_GPIO_BTN_RESET 23
+#define NBG6716_GPIO_BTN_RFKILL 1
+#define NBG6716_GPIO_BTN_USB0 14
+#define NBG6716_GPIO_BTN_USB1 0
+#define NBG6716_GPIO_BTN_WPS 22
+
+#define NBG6716_KEYS_POLL_INTERVAL 20 /* msecs */
+#define NBG6716_KEYS_DEBOUNCE_INTERVAL (3 * NBG6716_KEYS_POLL_INTERVAL)
+
+#define NBG6716_MAC0_OFFSET 0
+#define NBG6716_MAC1_OFFSET 6
+#define NBG6716_WMAC_CALDATA_OFFSET 0x1000
+#define NBG6716_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led nbg6716_leds_gpio[] __initdata = {
+ {
+ .name = "zyxel:white:internet",
+ .gpio = NBG6716_GPIO_LED_INTERNET,
+ .active_low = 1,
+ },
+ {
+ .name = "zyxel:white:power",
+ .gpio = NBG6716_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "zyxel:white:usb0",
+ .gpio = NBG6716_GPIO_LED_USB0,
+ .active_low = 1,
+ },
+ {
+ .name = "zyxel:white:usb1",
+ .gpio = NBG6716_GPIO_LED_USB1,
+ .active_low = 1,
+ },
+ {
+ .name = "zyxel:white:wifi2g",
+ .gpio = NBG6716_GPIO_LED_WIFI2G,
+ .active_low = 1,
+ },
+ {
+ .name = "zyxel:white:wifi5g",
+ .gpio = NBG6716_GPIO_LED_WIFI5G,
+ .active_low = 1,
+ },
+ {
+ .name = "zyxel:white:wps",
+ .gpio = NBG6716_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = {
+ {
+ .desc = "RESET button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG6716_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG6716_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+ {
+ .desc = "USB0 eject button",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG6716_GPIO_BTN_USB0,
+ .active_low = 1,
+ },
+ {
+ .desc = "USB1 eject button",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG6716_GPIO_BTN_USB1,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG6716_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg;
+static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg;
+static struct ar8327_led_cfg nbg6716_ar8327_led_cfg;
+
+static struct ar8327_platform_data nbg6716_ar8327_data = {
+ .pad0_cfg = &nbg6716_ar8327_pad0_cfg,
+ .pad6_cfg = &nbg6716_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &nbg6716_ar8327_led_cfg
+};
+
+static struct mdio_board_info nbg6716_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &nbg6716_ar8327_data,
+ },
+};
+
+static void nbg6716_get_mac(const char *name, char *mac)
+{
+ u8 *nvram = (u8 *) KSEG1ADDR(0x1f040000);
+ int err;
+
+ err = ath79_nvram_parse_mac_addr(nvram, 0x10000,
+ name, mac);
+ if (err)
+ pr_err("no MAC address found for %s\n", name);
+}
+
+static void __init nbg6716_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg6716_leds_gpio),
+ nbg6716_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(nbg6716_gpio_keys),
+ nbg6716_gpio_keys);
+
+ ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
+ ath79_register_nfc();
+
+ ath79_register_usb();
+
+ nbg6716_get_mac("ethaddr=", tmpmac);
+
+ ath79_register_pci();
+
+ ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 2);
+ ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 3);
+
+ mdiobus_register_board_info(nbg6716_mdio0_info,
+ ARRAY_SIZE(nbg6716_mdio0_info));
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+}
+
+static void __init nbg6716_010_setup(void)
+{
+ /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
+ nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
+ nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
+ nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
+ nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
+ nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+
+ /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
+ nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
+ nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
+ nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
+
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ nbg6716_ar8327_led_cfg.open_drain = 0;
+ nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
+ nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
+ nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
+ nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
+
+ nbg6716_common_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716",
+ "Zyxel NBG6716",
+ nbg6716_010_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-om2p.c
new file mode 100644
index 0000000..24f4527
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-om2p.c
@@ -0,0 +1,225 @@
+/*
+ * OpenMesh OM2P support
+ *
+ * Copyright (C) 2011 Marek Lindner <***@open-mesh.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define OM2P_GPIO_LED_POWER 0
+#define OM2P_GPIO_LED_GREEN 13
+#define OM2P_GPIO_LED_RED 14
+#define OM2P_GPIO_LED_YELLOW 15
+#define OM2P_GPIO_LED_LAN 16
+#define OM2P_GPIO_LED_WAN 17
+#define OM2P_GPIO_BTN_RESET 11
+
+#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */
+#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL)
+
+#define OM2P_WAN_PHYMASK BIT(4)
+
+#define OM2P_LC_GPIO_LED_POWER 1
+#define OM2P_LC_GPIO_LED_GREEN 15
+#define OM2P_LC_GPIO_LED_RED 16
+#define OM2P_LC_GPIO_LED_YELLOW 0
+#define OM2P_LC_GPIO_LED_LAN 13
+#define OM2P_LC_GPIO_LED_WAN 17
+#define OM2P_LC_GPIO_BTN_RESET 12
+
+static struct flash_platform_data om2p_flash_data = {
+ .type = "s25sl12800",
+ .name = "ar7240-nor0",
+};
+
+static struct gpio_led om2p_leds_gpio[] __initdata = {
+ {
+ .name = "om2p:blue:power",
+ .gpio = OM2P_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "om2p:red:wifi",
+ .gpio = OM2P_GPIO_LED_RED,
+ .active_low = 1,
+ }, {
+ .name = "om2p:yellow:wifi",
+ .gpio = OM2P_GPIO_LED_YELLOW,
+ .active_low = 1,
+ }, {
+ .name = "om2p:green:wifi",
+ .gpio = OM2P_GPIO_LED_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "om2p:blue:lan",
+ .gpio = OM2P_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "om2p:blue:wan",
+ .gpio = OM2P_GPIO_LED_WAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button om2p_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = OM2P_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init om2p_setup(void)
+{
+ u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
+ u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
+ u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(&om2p_flash_data);
+
+ ath79_register_mdio(0, ~OM2P_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
+ om2p_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(om2p_gpio_keys),
+ om2p_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup);
+
+
+static struct flash_platform_data om2p_lc_flash_data = {
+ .type = "s25sl12800",
+};
+
+static void __init om2p_lc_setup(void)
+{
+ u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
+ u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
+ u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000);
+ u32 t;
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
+
+ ath79_register_m25p80(&om2p_lc_flash_data);
+
+ om2p_leds_gpio[0].gpio = OM2P_LC_GPIO_LED_POWER;
+ om2p_leds_gpio[1].gpio = OM2P_LC_GPIO_LED_RED;
+ om2p_leds_gpio[2].gpio = OM2P_LC_GPIO_LED_YELLOW;
+ om2p_leds_gpio[3].gpio = OM2P_LC_GPIO_LED_GREEN;
+ om2p_leds_gpio[4].gpio = OM2P_LC_GPIO_LED_LAN;
+ om2p_leds_gpio[5].gpio = OM2P_LC_GPIO_LED_WAN;
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
+ om2p_leds_gpio);
+
+ om2p_gpio_keys[0].gpio = OM2P_LC_GPIO_BTN_RESET;
+ ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(om2p_gpio_keys),
+ om2p_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_OM2P_LC, "OM2P-LC", "OpenMesh OM2P LC", om2p_lc_setup);
+MIPS_MACHINE(ATH79_MACH_OM2Pv2, "OM2Pv2", "OpenMesh OM2Pv2", om2p_lc_setup);
+
+static void __init om2p_hs_setup(void)
+{
+ u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
+ u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
+ u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000);
+
+ /* make lan / wan leds software controllable */
+ ath79_gpio_output_select(OM2P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(OM2P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
+
+ /* enable reset button */
+ ath79_gpio_output_select(OM2P_GPIO_BTN_RESET, AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+
+ om2p_leds_gpio[4].gpio = OM2P_GPIO_LED_WAN;
+ om2p_leds_gpio[5].gpio = OM2P_GPIO_LED_LAN;
+
+ ath79_register_m25p80(&om2p_lc_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
+ om2p_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(om2p_gpio_keys),
+ om2p_gpio_keys);
+
+ ath79_register_wmac(art, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ /* GMAC0 is connected to the PHY0 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_OM2P_HS, "OM2P-HS", "OpenMesh OM2P HS", om2p_hs_setup);
+MIPS_MACHINE(ATH79_MACH_OM2P_HSv2, "OM2P-HSv2", "OpenMesh OM2P HSv2", om2p_hs_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb42.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb42.c
new file mode 100644
index 0000000..3a350e9
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb42.c
@@ -0,0 +1,83 @@
+/*
+ * Atheros PB42 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL)
+
+#define PB42_GPIO_BTN_SW4 8
+#define PB42_GPIO_BTN_SW5 3
+
+static struct gpio_keys_button pb42_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB42_GPIO_BTN_SW4,
+ .active_low = 1,
+ }, {
+ .desc = "sw5",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB42_GPIO_BTN_SW5,
+ .active_low = 1,
+ }
+};
+
+static const char *pb42_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data pb42_flash_data = {
+ .part_probes = pb42_part_probes,
+};
+
+#define PB42_WAN_PHYMASK BIT(20)
+#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
+#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
+
+static void __init pb42_init(void)
+{
+ ath79_register_m25p80(&pb42_flash_data);
+
+ ath79_register_mdio(0, ~PB42_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pb42_gpio_keys),
+ pb42_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb92.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb92.c
new file mode 100644
index 0000000..76715a5
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-pb92.c
@@ -0,0 +1,70 @@
+/*
+ * Atheros PB92 board support
+ *
+ * Copyright (C) 2010 Felix Fietkau <***@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL)
+
+#define PB92_GPIO_BTN_SW4 8
+#define PB92_GPIO_BTN_SW5 3
+
+static struct gpio_keys_button pb92_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB92_GPIO_BTN_SW4,
+ .active_low = 1,
+ }, {
+ .desc = "sw5",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB92_GPIO_BTN_SW5,
+ .active_low = 1,
+ }
+};
+
+static void __init pb92_init(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pb92_gpio_keys),
+ pb92_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb2011.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb2011.c
new file mode 100644
index 0000000..b73fae6
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb2011.c
@@ -0,0 +1,331 @@
+/*
+ * MikroTik RouterBOARD 2011 support
+ *
+ * Copyright (C) 2012 Stijn Tintel <***@linux-ipv6.be>
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "rb2011: " fmt
+
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/routerboot.h>
+#include <linux/gpio.h>
+
+#include <asm/prom.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "routerboot.h"
+
+#define RB2011_GPIO_NAND_NCE 14
+#define RB2011_GPIO_SFP_LOS 21
+
+#define RB_ROUTERBOOT_OFFSET 0x0000
+#define RB_ROUTERBOOT_MIN_SIZE 0xb000
+#define RB_HARD_CFG_SIZE 0x1000
+#define RB_BIOS_OFFSET 0xd000
+#define RB_BIOS_SIZE 0x1000
+#define RB_SOFT_CFG_OFFSET 0xf000
+#define RB_SOFT_CFG_SIZE 0x1000
+
+#define RB_ART_SIZE 0x10000
+
+#define RB2011_FLAG_SFP BIT(0)
+#define RB2011_FLAG_USB BIT(1)
+#define RB2011_FLAG_WLAN BIT(2)
+
+static struct mtd_partition rb2011_spi_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = RB_ROUTERBOOT_OFFSET,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "hard_config",
+ .size = RB_HARD_CFG_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = RB_BIOS_OFFSET,
+ .size = RB_BIOS_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .size = RB_SOFT_CFG_SIZE,
+ }
+};
+
+static void __init rb2011_init_partitions(const struct rb_info *info)
+{
+ rb2011_spi_partitions[0].size = info->hard_cfg_offs;
+ rb2011_spi_partitions[1].offset = info->hard_cfg_offs;
+ rb2011_spi_partitions[3].offset = info->soft_cfg_offs;
+}
+
+static struct mtd_partition rb2011_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data rb2011_spi_flash_data = {
+ .parts = rb2011_spi_partitions,
+ .nr_parts = ARRAY_SIZE(rb2011_spi_partitions),
+};
+
+static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL3,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_pad_cfg rb2011_ar8327_pad6_cfg;
+static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg;
+
+static struct ar8327_led_cfg rb2011_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc731c731,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static const struct ar8327_led_info rb2011_ar8327_leds[] __initconst = {
+ AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"),
+ AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"),
+ AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"),
+ AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"),
+ AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"),
+ AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"),
+ AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"),
+ AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"),
+ AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"),
+ AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"),
+ AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"),
+};
+
+static struct ar8327_platform_data rb2011_ar8327_data = {
+ .pad0_cfg = &rb2011_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &rb2011_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(rb2011_ar8327_leds),
+ .leds = rb2011_ar8327_leds,
+};
+
+static struct mdio_board_info rb2011_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb2011_ar8327_data,
+ },
+};
+
+static void __init rb2011_wlan_init(void)
+{
+ char *art_buf;
+ u8 wlan_mac[ETH_ALEN];
+
+ art_buf = rb_get_wlan_data();
+ if (art_buf == NULL)
+ return;
+
+ ath79_init_mac(wlan_mac, ath79_mac_base, 11);
+ ath79_register_wmac(art_buf + 0x1000, wlan_mac);
+
+ kfree(art_buf);
+}
+
+static void rb2011_nand_select_chip(int chip_no)
+{
+ switch (chip_no) {
+ case 0:
+ gpio_set_value(RB2011_GPIO_NAND_NCE, 0);
+ break;
+ default:
+ gpio_set_value(RB2011_GPIO_NAND_NCE, 1);
+ break;
+ }
+ ndelay(500);
+}
+
+static struct nand_ecclayout rb2011_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512) {
+ /*
+ * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
+ * will not be able to find the kernel that we load.
+ */
+ chip->ecc.layout = &rb2011_nand_ecclayout;
+ }
+
+ return 0;
+}
+
+static void __init rb2011_nand_init(void)
+{
+ gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
+
+ ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup);
+ ath79_nfc_set_parts(rb2011_nand_partitions,
+ ARRAY_SIZE(rb2011_nand_partitions));
+ ath79_nfc_set_select_chip(rb2011_nand_select_chip);
+ ath79_nfc_set_swap_dma(true);
+ ath79_register_nfc();
+}
+
+static int rb2011_get_port_link(unsigned port)
+{
+ if (port != 6)
+ return -EINVAL;
+
+ /* The Loss of signal line is active low */
+ return !gpio_get_value(RB2011_GPIO_SFP_LOS);
+}
+
+static void __init rb2011_sfp_init(void)
+{
+ gpio_request_one(RB2011_GPIO_SFP_LOS, GPIOF_IN, "SFP LOS");
+
+ rb2011_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
+
+ rb2011_ar8327_data.pad6_cfg = &rb2011_ar8327_pad6_cfg;
+
+ rb2011_ar8327_sgmii_cfg.sgmii_ctrl = 0xc70167d0;
+ rb2011_ar8327_sgmii_cfg.serdes_aen = true;
+
+ rb2011_ar8327_data.sgmii_cfg = &rb2011_ar8327_sgmii_cfg;
+
+ rb2011_ar8327_data.port6_cfg.force_link = 1;
+ rb2011_ar8327_data.port6_cfg.speed = AR8327_PORT_SPEED_1000;
+ rb2011_ar8327_data.port6_cfg.duplex = 1;
+
+ rb2011_ar8327_data.get_port_link = rb2011_get_port_link;
+}
+
+static int __init rb2011_setup(u32 flags)
+{
+ const struct rb_info *info;
+ char buf[64];
+
+ info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
+ if (!info)
+ return -ENODEV;
+
+ scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
+ (info->board_name) ? info->board_name : "");
+ mips_set_machine_name(buf);
+
+ rb2011_init_partitions(info);
+
+ ath79_register_m25p80(&rb2011_spi_flash_data);
+ rb2011_nand_init();
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(rb2011_mdio0_info,
+ ARRAY_SIZE(rb2011_mdio0_info));
+
+ /* GMAC0 is connected to an ar8327 switch */
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+
+ if (flags & RB2011_FLAG_SFP)
+ rb2011_sfp_init();
+
+ if (flags & RB2011_FLAG_WLAN)
+ rb2011_wlan_init();
+
+ if (flags & RB2011_FLAG_USB)
+ ath79_register_usb();
+
+ return 0;
+}
+
+static void __init rb2011l_setup(void)
+{
+ rb2011_setup(0);
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011L, "2011L", rb2011l_setup);
+
+static void __init rb2011us_setup(void)
+{
+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
+
+static void __init rb2011g_setup(void)
+{
+ rb2011_setup(RB2011_FLAG_SFP |
+ RB2011_FLAG_USB |
+ RB2011_FLAG_WLAN);
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011G, "2011G", rb2011g_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb4xx.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb4xx.c
new file mode 100644
index 0000000..1a61b45
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb4xx.c
@@ -0,0 +1,465 @@
+/*
+ * MikroTik RouterBOARD 4xx series support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/rb4xx_cpld.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define RB4XX_GPIO_USER_LED 4
+#define RB4XX_GPIO_RESET_SWITCH 7
+
+#define RB4XX_GPIO_CPLD_BASE 32
+#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
+#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
+#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
+#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
+#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
+
+#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
+
+static struct gpio_led rb4xx_leds_gpio[] __initdata = {
+ {
+ .name = "rb4xx:yellow:user",
+ .gpio = RB4XX_GPIO_USER_LED,
+ .active_low = 0,
+ }, {
+ .name = "rb4xx:green:led1",
+ .gpio = RB4XX_GPIO_CPLD_LED1,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led2",
+ .gpio = RB4XX_GPIO_CPLD_LED2,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led3",
+ .gpio = RB4XX_GPIO_CPLD_LED3,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led4",
+ .gpio = RB4XX_GPIO_CPLD_LED4,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led5",
+ .gpio = RB4XX_GPIO_CPLD_LED5,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
+ {
+ .desc = "reset_switch",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RB4XX_GPIO_RESET_SWITCH,
+ .active_low = 1,
+ }
+};
+
+static struct platform_device rb4xx_nand_device = {
+ .name = "rb4xx-nand",
+ .id = -1,
+};
+
+static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
+ {
+ .slot = 17,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }, {
+ .slot = 18,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(0),
+ }, {
+ .slot = 18,
+ .pin = 2,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 19,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 19,
+ .pin = 2,
+ .irq = ATH79_PCI_IRQ(2),
+ }, {
+ .slot = 20,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }, {
+ .slot = 20,
+ .pin = 2,
+ .irq = ATH79_PCI_IRQ(0),
+ }, {
+ .slot = 21,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(0),
+ }, {
+ .slot = 22,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 22,
+ .pin = 2,
+ .irq = ATH79_PCI_IRQ(2),
+ }, {
+ .slot = 23,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }, {
+ .slot = 23,
+ .pin = 2,
+ .irq = ATH79_PCI_IRQ(0),
+ }
+};
+
+static struct mtd_partition rb4xx_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = 0,
+ .size = 0x0b000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "hard_config",
+ .offset = 0x0b000,
+ .size = 0x01000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = 0x0d000,
+ .size = 0x02000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .offset = 0x0f000,
+ .size = 0x01000,
+ }
+};
+
+static struct flash_platform_data rb4xx_flash_data = {
+ .type = "pm25lv512",
+ .parts = rb4xx_partitions,
+ .nr_parts = ARRAY_SIZE(rb4xx_partitions),
+};
+
+static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
+ .gpio_base = RB4XX_GPIO_CPLD_BASE,
+};
+
+static struct mmc_spi_platform_data rb4xx_mmc_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info rb4xx_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &rb4xx_flash_data,
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-rb4xx-cpld",
+ .platform_data = &rb4xx_cpld_data,
+ }
+};
+
+static struct spi_board_info rb4xx_microsd_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 2,
+ .max_speed_hz = 25000000,
+ .modalias = "mmc_spi",
+ .platform_data = &rb4xx_mmc_data,
+ }
+};
+
+
+static struct resource rb4xx_spi_resources[] = {
+ {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device rb4xx_spi_device = {
+ .name = "rb4xx-spi",
+ .id = -1,
+ .resource = rb4xx_spi_resources,
+ .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
+};
+
+static void __init rb4xx_generic_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+ rb4xx_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rb4xx_gpio_keys),
+ rb4xx_gpio_keys);
+
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ platform_device_register(&rb4xx_spi_device);
+ platform_device_register(&rb4xx_nand_device);
+}
+
+static void __init rb411_setup(void)
+{
+ rb4xx_generic_setup();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ ath79_register_mdio(0, 0xfffffffc);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x00000003;
+
+ ath79_register_eth(0);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
+ rb411_setup);
+
+static void __init rb411u_setup(void)
+{
+ rb411_setup();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
+ rb411u_setup);
+
+#define RB433_LAN_PHYMASK BIT(0)
+#define RB433_WAN_PHYMASK BIT(4)
+#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
+
+static void __init rb433_setup(void)
+{
+ rb4xx_generic_setup();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
+ rb433_setup);
+
+static void __init rb433u_setup(void)
+{
+ rb433_setup();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
+ rb433u_setup);
+
+static void __init rb435g_setup(void)
+{
+ rb4xx_generic_setup();
+
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_435G, "435G", "MikroTik RouterBOARD 435G",
+ rb435g_setup);
+
+#define RB450_LAN_PHYMASK BIT(0)
+#define RB450_WAN_PHYMASK BIT(4)
+#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
+
+static void __init rb450_generic_setup(int gige)
+{
+ rb4xx_generic_setup();
+ ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth0_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+}
+
+static void __init rb450_setup(void)
+{
+ rb450_generic_setup(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
+ rb450_setup);
+
+static void __init rb450g_setup(void)
+{
+ rb450_generic_setup(1);
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
+ rb450g_setup);
+
+static void __init rb493_setup(void)
+{
+ rb4xx_generic_setup();
+
+ ath79_register_mdio(0, 0x3fffff00);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x00000001;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
+ rb493_setup);
+
+#define RB493G_GPIO_MDIO_MDC 7
+#define RB493G_GPIO_MDIO_DATA 8
+
+#define RB493G_MDIO_PHYMASK BIT(0)
+
+static struct mdio_gpio_platform_data rb493g_mdio_data = {
+ .mdc = RB493G_GPIO_MDIO_MDC,
+ .mdio = RB493G_GPIO_MDIO_DATA,
+
+ .phy_mask = ~RB493G_MDIO_PHYMASK,
+};
+
+static struct platform_device rb493g_mdio_device = {
+ .name = "mdio-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb493g_mdio_data,
+ },
+};
+
+static void __init rb493g_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+ rb4xx_leds_gpio);
+
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ platform_device_register(&rb4xx_spi_device);
+ platform_device_register(&rb4xx_nand_device);
+
+ ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
+ ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ platform_device_register(&rb493g_mdio_device);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
+ rb493g_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb750.c
new file mode 100644
index 0000000..5656d3c
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb750.c
@@ -0,0 +1,346 @@
+/*
+ * MikroTik RouterBOARD 750/750GL support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/ar8216_platform.h>
+#include <linux/rle.h>
+#include <linux/routerboot.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/mach-rb750.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-usb.h"
+#include "dev-eth.h"
+#include "machtypes.h"
+#include "routerboot.h"
+
+static struct rb750_led_data rb750_leds[] = {
+ {
+ .name = "rb750:green:act",
+ .mask = RB750_LED_ACT,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port1",
+ .mask = RB750_LED_PORT5,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port2",
+ .mask = RB750_LED_PORT4,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port3",
+ .mask = RB750_LED_PORT3,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port4",
+ .mask = RB750_LED_PORT2,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port5",
+ .mask = RB750_LED_PORT1,
+ .active_low = 1,
+ }
+};
+
+static struct rb750_led_data rb750gr3_leds[] = {
+ {
+ .name = "rb750:green:act",
+ .mask = RB7XX_LED_ACT,
+ .active_low = 1,
+ },
+};
+
+static struct rb750_led_platform_data rb750_leds_data;
+static struct platform_device rb750_leds_device = {
+ .name = "leds-rb750",
+ .dev = {
+ .platform_data = &rb750_leds_data,
+ }
+};
+
+static struct rb7xx_nand_platform_data rb750_nand_data;
+static struct platform_device rb750_nand_device = {
+ .name = "rb750-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb750_nand_data,
+ }
+};
+
+static void rb750_latch_change(u32 mask_clr, u32 mask_set)
+{
+ static DEFINE_SPINLOCK(lock);
+ static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
+ static u32 latch_oe;
+ static u32 latch_clr;
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&lock, flags);
+
+ if ((mask_clr & BIT(31)) != 0 &&
+ (latch_set & RB750_LVC573_LE) == 0) {
+ goto unlock;
+ }
+
+ latch_set = (latch_set | mask_set) & ~mask_clr;
+ latch_clr = (latch_clr | mask_clr) & ~mask_set;
+
+ if (latch_oe == 0)
+ latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
+
+ if (likely(latch_set & RB750_LVC573_LE)) {
+ void __iomem *base = ath79_gpio_base;
+
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t |= mask_clr | latch_oe | mask_set;
+
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+ __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
+ __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
+ } else if (mask_clr & RB750_LVC573_LE) {
+ void __iomem *base = ath79_gpio_base;
+
+ latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
+ }
+
+unlock:
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+static void rb750_nand_enable_pins(void)
+{
+ rb750_latch_change(RB750_LVC573_LE, 0);
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_SPI_EN);
+}
+
+static void rb750_nand_disable_pins(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
+ AR724X_GPIO_FUNC_JTAG_DISABLE);
+ rb750_latch_change(0, RB750_LVC573_LE);
+}
+
+static void __init rb750_setup(void)
+{
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds);
+ rb750_leds_data.leds = rb750_leds;
+ rb750_leds_data.latch_change = rb750_latch_change;
+ platform_device_register(&rb750_leds_device);
+
+ rb750_nand_data.nce_line = RB750_NAND_NCE;
+ rb750_nand_data.enable_pins = rb750_nand_enable_pins;
+ rb750_nand_data.disable_pins = rb750_nand_disable_pins;
+ rb750_nand_data.latch_change = rb750_latch_change;
+ platform_device_register(&rb750_nand_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
+ rb750_setup);
+
+static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data rb750gr3_ar8327_data = {
+ .pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ }
+};
+
+static struct mdio_board_info rb750g3_mdio_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb750gr3_ar8327_data,
+ },
+};
+
+static void rb750gr3_nand_enable_pins(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_SPI_EN |
+ AR724X_GPIO_FUNC_SPI_CS_EN2);
+}
+
+static void rb750gr3_nand_disable_pins(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN |
+ AR724X_GPIO_FUNC_SPI_CS_EN2,
+ AR724X_GPIO_FUNC_JTAG_DISABLE);
+}
+
+static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set)
+{
+ static DEFINE_SPINLOCK(lock);
+ static u32 latch_set = RB7XX_LED_ACT;
+ static u32 latch_clr;
+ void __iomem *base = ath79_gpio_base;
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&lock, flags);
+
+ latch_set = (latch_set | mask_set) & ~mask_clr;
+ latch_clr = (latch_clr | mask_clr) & ~mask_set;
+
+ mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR);
+ mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR);
+
+ if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) {
+ /* enable output mode */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t |= RB7XX_LED_ACT;
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+
+ mask_clr |= RB7XX_LED_ACT;
+ } else {
+ /* disable output mode */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t &= ~RB7XX_LED_ACT;
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+ }
+
+ __raw_writel(mask_set, base + AR71XX_GPIO_REG_SET);
+ __raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR);
+
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+static void __init rb750gr3_setup(void)
+{
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(rb750g3_mdio_info,
+ ARRAY_SIZE(rb750g3_mdio_info));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_pll_data.pll_1000 = 0x62000000;
+
+ ath79_register_eth(0);
+
+ rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds);
+ rb750_leds_data.leds = rb750gr3_leds;
+ rb750_leds_data.latch_change = rb750gr3_latch_change;
+ platform_device_register(&rb750_leds_device);
+
+ rb750_nand_data.nce_line = RB7XX_NAND_NCE;
+ rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins;
+ rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins;
+ rb750_nand_data.latch_change = rb750gr3_latch_change;
+ platform_device_register(&rb750_nand_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
+ rb750gr3_setup);
+
+#define RB751_HARDCONFIG 0x1f00b000
+#define RB751_HARDCONFIG_SIZE 0x1000
+
+static void __init rb751_wlan_setup(void)
+{
+ u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
+ struct ath9k_platform_data *wmac_data;
+ u16 tag_len;
+ u8 *tag;
+ u16 mac_len;
+ u8 *mac;
+ int err;
+
+ wmac_data = ap9x_pci_get_wmac_data(0);
+ if (!wmac_data) {
+ pr_err("rb75x: unable to get address of wlan data\n");
+ return;
+ }
+
+ ap9x_pci_setup_wmac_led_pin(0, 9);
+
+ err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
+ RB_ID_WLAN_DATA, &tag, &tag_len);
+ if (err) {
+ pr_err("rb75x: no calibration data found\n");
+ return;
+ }
+
+ err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
+ sizeof(wmac_data->eeprom_data), NULL, NULL);
+ if (err) {
+ pr_err("rb75x: unable to decode wlan eeprom data\n");
+ return;
+ }
+
+ err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
+ RB_ID_MAC_ADDRESS_PACK, &mac, &mac_len);
+ if (err) {
+ pr_err("rb75x: no mac address found\n");
+ return;
+ }
+
+ ap91_pci_init(NULL, mac);
+}
+
+static void __init rb751_setup(void)
+{
+ rb750_setup();
+ ath79_register_usb();
+ rb751_wlan_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751",
+ rb751_setup);
+
+static void __init rb751g_setup(void)
+{
+ rb750gr3_setup();
+ ath79_register_usb();
+ rb751_wlan_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G",
+ rb751g_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb91x.c
new file mode 100644
index 0000000..9ef5c44
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb91x.c
@@ -0,0 +1,349 @@
+/*
+ * MikroTik RouterBOARD 91X support
+ *
+ * Copyright (C) 2013 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "rb91x: " fmt
+
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/74x164.h>
+#include <linux/spi/flash.h>
+#include <linux/routerboot.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-latch.h>
+#include <linux/platform_data/rb91x_nand.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include <asm/prom.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ath79_spi_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "routerboot.h"
+
+#define RB_ROUTERBOOT_OFFSET 0x0000
+#define RB_ROUTERBOOT_MIN_SIZE 0xb000
+#define RB_HARD_CFG_SIZE 0x1000
+#define RB_BIOS_OFFSET 0xd000
+#define RB_BIOS_SIZE 0x1000
+#define RB_SOFT_CFG_OFFSET 0xf000
+#define RB_SOFT_CFG_SIZE 0x1000
+
+#define RB91X_FLAG_USB BIT(0)
+#define RB91X_FLAG_PCIE BIT(1)
+
+#define RB91X_LATCH_GPIO_BASE AR934X_GPIO_COUNT
+#define RB91X_LATCH_GPIO(_x) (RB91X_LATCH_GPIO_BASE + (_x))
+
+#define RB91X_SSR_GPIO_BASE (RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT)
+#define RB91X_SSR_GPIO(_x) (RB91X_SSR_GPIO_BASE + (_x))
+
+#define RB91X_SSR_BIT_LED1 0
+#define RB91X_SSR_BIT_LED2 1
+#define RB91X_SSR_BIT_LED3 2
+#define RB91X_SSR_BIT_LED4 3
+#define RB91X_SSR_BIT_LED5 4
+#define RB91X_SSR_BIT_5 5
+#define RB91X_SSR_BIT_USB_POWER 6
+#define RB91X_SSR_BIT_PCIE_POWER 7
+
+#define RB91X_GPIO_SSR_STROBE RB91X_LATCH_GPIO(0)
+#define RB91X_GPIO_LED_POWER RB91X_LATCH_GPIO(1)
+#define RB91X_GPIO_LED_USER RB91X_LATCH_GPIO(2)
+#define RB91X_GPIO_NAND_READ RB91X_LATCH_GPIO(3)
+#define RB91X_GPIO_NAND_RDY RB91X_LATCH_GPIO(4)
+#define RB91X_GPIO_NLE RB91X_LATCH_GPIO(11)
+#define RB91X_GPIO_NAND_NRW RB91X_LATCH_GPIO(12)
+#define RB91X_GPIO_NAND_NCE RB91X_LATCH_GPIO(13)
+#define RB91X_GPIO_NAND_CLE RB91X_LATCH_GPIO(14)
+#define RB91X_GPIO_NAND_ALE RB91X_LATCH_GPIO(15)
+
+#define RB91X_GPIO_LED_1 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED1)
+#define RB91X_GPIO_LED_2 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED2)
+#define RB91X_GPIO_LED_3 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED3)
+#define RB91X_GPIO_LED_4 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED4)
+#define RB91X_GPIO_LED_5 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED5)
+#define RB91X_GPIO_USB_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_USB_POWER)
+#define RB91X_GPIO_PCIE_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_PCIE_POWER)
+
+struct rb_board_info {
+ const char *name;
+ u32 flags;
+};
+
+static struct mtd_partition rb711gr100_spi_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = RB_ROUTERBOOT_OFFSET,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "hard_config",
+ .size = RB_HARD_CFG_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = RB_BIOS_OFFSET,
+ .size = RB_BIOS_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .size = RB_SOFT_CFG_SIZE,
+ }
+};
+
+static struct flash_platform_data rb711gr100_spi_flash_data = {
+ .parts = rb711gr100_spi_partitions,
+ .nr_parts = ARRAY_SIZE(rb711gr100_spi_partitions),
+};
+
+static int rb711gr100_gpio_latch_gpios[AR934X_GPIO_COUNT] __initdata = {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+ 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
+};
+
+static struct gpio_latch_platform_data rb711gr100_gpio_latch_data __initdata = {
+ .base = RB91X_LATCH_GPIO_BASE,
+ .num_gpios = ARRAY_SIZE(rb711gr100_gpio_latch_gpios),
+ .gpios = rb711gr100_gpio_latch_gpios,
+ .le_gpio_index = 11,
+ .le_active_low = true,
+};
+
+static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
+ .gpio_nce = RB91X_GPIO_NAND_NCE,
+ .gpio_ale = RB91X_GPIO_NAND_ALE,
+ .gpio_cle = RB91X_GPIO_NAND_CLE,
+ .gpio_rdy = RB91X_GPIO_NAND_RDY,
+ .gpio_read = RB91X_GPIO_NAND_READ,
+ .gpio_nrw = RB91X_GPIO_NAND_NRW,
+ .gpio_nle = RB91X_GPIO_NLE,
+};
+
+static u8 rb711gr100_ssr_initdata[] __initdata = {
+ BIT(RB91X_SSR_BIT_PCIE_POWER) |
+ BIT(RB91X_SSR_BIT_USB_POWER) |
+ BIT(RB91X_SSR_BIT_5)
+};
+
+static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = {
+ .base = RB91X_SSR_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(rb711gr100_ssr_initdata),
+ .init_data = rb711gr100_ssr_initdata,
+};
+
+static struct ath79_spi_controller_data rb711gr100_spi0_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+ .is_flash = true,
+};
+
+static struct ath79_spi_controller_data rb711gr100_spi1_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_GPIO,
+ .cs_line = RB91X_GPIO_SSR_STROBE,
+};
+
+static struct spi_board_info rb711gr100_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &rb711gr100_spi_flash_data,
+ .controller_data = &rb711gr100_spi0_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &rb711gr100_ssr_data,
+ .controller_data = &rb711gr100_spi1_cdata
+ }
+};
+
+static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = {
+ .bus_num = 0,
+ .num_chipselect = 2,
+};
+
+static struct gpio_led rb711gr100_leds[] __initdata = {
+ {
+ .name = "rb:green:led1",
+ .gpio = RB91X_GPIO_LED_1,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led2",
+ .gpio = RB91X_GPIO_LED_2,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led3",
+ .gpio = RB91X_GPIO_LED_3,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led4",
+ .gpio = RB91X_GPIO_LED_4,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led5",
+ .gpio = RB91X_GPIO_LED_5,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:user",
+ .gpio = RB91X_GPIO_LED_USER,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:power",
+ .gpio = RB91X_GPIO_LED_POWER,
+ .active_low = 0,
+ },
+};
+
+static struct at803x_platform_data rb91x_at803x_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info rb91x_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb91x_at803x_data,
+ },
+};
+
+static void __init rb711gr100_init_partitions(const struct rb_info *info)
+{
+ rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
+ rb711gr100_spi_partitions[1].offset = info->hard_cfg_offs;
+
+ rb711gr100_spi_partitions[3].offset = info->soft_cfg_offs;
+}
+
+void __init rb711gr100_wlan_init(void)
+{
+ char *caldata;
+ u8 wlan_mac[ETH_ALEN];
+
+ caldata = rb_get_wlan_data();
+ if (caldata == NULL)
+ return;
+
+ ath79_init_mac(wlan_mac, ath79_mac_base, 1);
+ ath79_register_wmac(caldata + 0x1000, wlan_mac);
+
+ kfree(caldata);
+}
+
+#define RB_BOARD_INFO(_name, _flags) \
+ { \
+ .name = (_name), \
+ .flags = (_flags), \
+ }
+
+static const struct rb_board_info rb711gr100_boards[] __initconst = {
+ RB_BOARD_INFO("911G-2HPnD", 0),
+ RB_BOARD_INFO("911G-5HPnD", 0),
+ RB_BOARD_INFO("912UAG-2HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
+ RB_BOARD_INFO("912UAG-5HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
+};
+
+static u32 rb711gr100_get_flags(const struct rb_info *info)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rb711gr100_boards); i++) {
+ const struct rb_board_info *bi;
+
+ bi = &rb711gr100_boards[i];
+ if (strcmp(info->board_name, bi->name) == 0)
+ return bi->flags;
+ }
+
+ return 0;
+}
+
+static void __init rb711gr100_setup(void)
+{
+ const struct rb_info *info;
+ char buf[64];
+ u32 flags;
+
+ info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
+ if (!info)
+ return;
+
+ scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
+ (info->board_name) ? info->board_name : "");
+ mips_set_machine_name(buf);
+
+ rb711gr100_init_partitions(info);
+ ath79_register_spi(&rb711gr100_spi_data, rb711gr100_spi_info,
+ ARRAY_SIZE(rb711gr100_spi_info));
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_RXD_DELAY |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(rb91x_mdio0_info,
+ ARRAY_SIZE(rb91x_mdio0_info));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_pll_data.pll_1000 = 0x02000000;
+
+ ath79_register_eth(0);
+
+ rb711gr100_wlan_init();
+
+ platform_device_register_data(NULL, "rb91x-nand", -1,
+ &rb711gr100_nand_data,
+ sizeof(rb711gr100_nand_data));
+
+ platform_device_register_data(NULL, "gpio-latch", -1,
+ &rb711gr100_gpio_latch_data,
+ sizeof(rb711gr100_gpio_latch_data));
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb711gr100_leds),
+ rb711gr100_leds);
+
+ flags = rb711gr100_get_flags(info);
+
+ if (flags & RB91X_FLAG_USB)
+ ath79_register_usb();
+
+ if (flags & RB91X_FLAG_PCIE)
+ ath79_register_pci();
+
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_711GR100, "711Gr100", rb711gr100_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb95x.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb95x.c
new file mode 100644
index 0000000..c2261ab
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rb95x.c
@@ -0,0 +1,258 @@
+/*
+ * MikroTik RouterBOARD 95X support
+ *
+ * Copyright (C) 2012 Stijn Tintel <***@linux-ipv6.be>
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2013 Kamil Trzcinski <***@ayufan.eu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "rb95x: " fmt
+
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/routerboot.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "routerboot.h"
+#include "dev-leds-gpio.h"
+
+#define RB95X_GPIO_NAND_NCE 14
+
+static struct mtd_partition rb95x_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct gpio_led rb951ui_leds_gpio[] __initdata = {
+ {
+ .name = "rb:green:wlan",
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:act",
+ .gpio = 3,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port1",
+ .gpio = 13,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port2",
+ .gpio = 12,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port3",
+ .gpio = 4,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port4",
+ .gpio = 21,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:port5",
+ .gpio = 16,
+ .active_low = 1,
+ }
+};
+
+static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data rb95x_ar8327_data = {
+ .pad0_cfg = &rb95x_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ }
+};
+
+static struct mdio_board_info rb95x_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb95x_ar8327_data,
+ },
+};
+
+void __init rb95x_wlan_init(void)
+{
+ char *art_buf;
+ u8 wlan_mac[ETH_ALEN];
+
+ art_buf = rb_get_wlan_data();
+ if (art_buf == NULL)
+ return;
+
+ ath79_init_mac(wlan_mac, ath79_mac_base, 11);
+ ath79_register_wmac(art_buf + 0x1000, wlan_mac);
+
+ kfree(art_buf);
+}
+
+static void rb95x_nand_select_chip(int chip_no)
+{
+ switch (chip_no) {
+ case 0:
+ gpio_set_value(RB95X_GPIO_NAND_NCE, 0);
+ break;
+ default:
+ gpio_set_value(RB95X_GPIO_NAND_NCE, 1);
+ break;
+ }
+ ndelay(500);
+}
+
+static struct nand_ecclayout rb95x_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static int rb95x_nand_scan_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512) {
+ /*
+ * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
+ * will not be able to find the kernel that we load.
+ */
+ chip->ecc.layout = &rb95x_nand_ecclayout;
+ }
+
+ return 0;
+}
+
+void __init rb95x_nand_init(void)
+{
+ gpio_request_one(RB95X_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
+
+ ath79_nfc_set_scan_fixup(rb95x_nand_scan_fixup);
+ ath79_nfc_set_parts(rb95x_nand_partitions,
+ ARRAY_SIZE(rb95x_nand_partitions));
+ ath79_nfc_set_select_chip(rb95x_nand_select_chip);
+ ath79_nfc_set_swap_dma(true);
+ ath79_register_nfc();
+}
+
+static int __init rb95x_setup(void)
+{
+ const struct rb_info *info;
+
+ info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
+ if (!info)
+ return -EINVAL;
+
+ rb95x_nand_init();
+
+ return 0;
+}
+
+static void __init rb951g_setup(void)
+{
+ if (rb95x_setup())
+ return;
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(rb95x_mdio0_info,
+ ARRAY_SIZE(rb95x_mdio0_info));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ rb95x_wlan_init();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
+ rb951g_setup);
+
+static void __init rb951ui_setup(void)
+{
+ if (rb95x_setup())
+ return;
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "POE power");
+
+ rb95x_wlan_init();
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
+ rb951ui_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
+ rb951ui_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rbsxtlite.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rbsxtlite.c
new file mode 100644
index 0000000..94e0b44
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rbsxtlite.c
@@ -0,0 +1,238 @@
+/*
+ * MikroTik RouterBOARD SXT Lite support
+ *
+ * Copyright (C) 2012 Stijn Tintel <***@linux-ipv6.be>
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2013 Vyacheslav Adamanov <***@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "sxtlite: " fmt
+
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/rle.h>
+#include <linux/routerboot.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "routerboot.h"
+#include <linux/ar8216_platform.h>
+
+#define SXTLITE_GPIO_NAND_NCE 14
+#define SXTLITE_GPIO_LED_USER 3
+#define SXTLITE_GPIO_LED_1 13
+#define SXTLITE_GPIO_LED_2 12
+#define SXTLITE_GPIO_LED_3 4
+#define SXTLITE_GPIO_LED_4 21
+#define SXTLITE_GPIO_LED_5 18
+#define SXTLITE_GPIO_LED_POWER 11
+
+#define SXTLITE_GPIO_BUZZER 19
+
+#define SXTLITE_GPIO_BTN_RESET 15
+
+#define SXTLITE_KEYS_POLL_INTERVAL 20
+#define SXTLITE_KEYS_DEBOUNCE_INTERVAL (3 * SXTLITE_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition rbsxtlite_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct gpio_led rbsxtlite_leds_gpio[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = SXTLITE_GPIO_LED_USER,
+ .active_low = 1,
+ },
+ {
+ .name = "rb:green:led1",
+ .gpio = SXTLITE_GPIO_LED_1,
+ .active_low = 1,
+ },
+ {
+ .name = "rb:green:led2",
+ .gpio = SXTLITE_GPIO_LED_2,
+ .active_low = 1,
+ },
+ {
+ .name = "rb:green:led3",
+ .gpio = SXTLITE_GPIO_LED_3,
+ .active_low = 1,
+ },
+ {
+ .name = "rb:green:led4",
+ .gpio = SXTLITE_GPIO_LED_4,
+ .active_low = 1,
+ },
+ {
+ .name = "rb:green:led5",
+ .gpio = SXTLITE_GPIO_LED_5,
+ .active_low = 1,
+ },
+ {
+ .name = "rb:green:power",
+ .gpio = SXTLITE_GPIO_LED_POWER,
+ },
+};
+
+static struct gpio_keys_button rbsxtlite_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = SXTLITE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = SXTLITE_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+};
+
+static int __init rbsxtlite_rbinfo_init(void)
+{
+ const struct rb_info *info;
+
+ info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
+ if (!info)
+ return -EINVAL;
+ return 0;
+
+}
+
+void __init rbsxtlite_wlan_init(void)
+{
+ char *art_buf;
+ u8 wlan_mac[ETH_ALEN];
+
+ art_buf = rb_get_wlan_data();
+ if (art_buf == NULL)
+ return;
+
+ ath79_init_mac(wlan_mac, ath79_mac_base, 1);
+ ath79_register_wmac(art_buf + 0x1000, wlan_mac);
+
+ kfree(art_buf);
+}
+
+static void rbsxtlite_nand_select_chip(int chip_no)
+{
+ switch (chip_no) {
+ case 0:
+ gpio_set_value(SXTLITE_GPIO_NAND_NCE, 0);
+ break;
+ default:
+ gpio_set_value(SXTLITE_GPIO_NAND_NCE, 1);
+ break;
+ }
+ ndelay(500);
+}
+
+static struct nand_ecclayout rbsxtlite_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static int rbsxtlite_nand_scan_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512) {
+ /*
+ * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
+ * will not be able to find the kernel that we load.
+ */
+ chip->ecc.layout = &rbsxtlite_nand_ecclayout;
+ }
+
+ return 0;
+}
+
+void __init rbsxtlite_gpio_init(void)
+{
+ gpio_request_one(SXTLITE_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
+}
+
+void __init rbsxtlite_nand_init(void)
+{
+ ath79_nfc_set_scan_fixup(rbsxtlite_nand_scan_fixup);
+ ath79_nfc_set_parts(rbsxtlite_nand_partitions,
+ ARRAY_SIZE(rbsxtlite_nand_partitions));
+ ath79_nfc_set_select_chip(rbsxtlite_nand_select_chip);
+ ath79_nfc_set_swap_dma(true);
+ ath79_register_nfc();
+}
+
+
+static void __init rbsxtlite_setup(void)
+{
+ if(rbsxtlite_rbinfo_init())
+ return;
+ rbsxtlite_nand_init();
+ rbsxtlite_wlan_init();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbsxtlite_leds_gpio),
+ rbsxtlite_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, SXTLITE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rbsxtlite_gpio_keys),
+ rbsxtlite_gpio_keys);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* GMAC0 is left unused */
+
+ /* GMAC1 is connected to MAC0 on the internal switch */
+ /* The ethernet port connects to PHY P0, which connects to MAC1
+ on the internal switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+
+}
+
+
+MIPS_MACHINE(ATH79_MACH_RB_SXTLITE2ND, "sxt2n", "Mikrotik RouterBOARD SXT Lite2",
+ rbsxtlite_setup);
+
+MIPS_MACHINE(ATH79_MACH_RB_SXTLITE5ND, "sxt5n", "Mikrotik RouterBOARD SXT Lite5",
+ rbsxtlite_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rw2458n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rw2458n.c
new file mode 100644
index 0000000..bb7c247
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-rw2458n.c
@@ -0,0 +1,91 @@
+/*
+ * Redwave RW2458N support
+ *
+ * Copyright (C) 2011-2013 Cezary Jackiewicz <***@eko.one.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define RW2458N_GPIO_LED_D3 1
+#define RW2458N_GPIO_LED_D4 0
+#define RW2458N_GPIO_LED_D5 11
+#define RW2458N_GPIO_LED_D6 7
+#define RW2458N_GPIO_BTN_RESET 12
+
+#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RW2458N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+#define RW2458N_WAN_PHYMASK BIT(4)
+
+static struct gpio_led rw2458n_leds_gpio[] __initdata = {
+ {
+ .name = "rw2458n:green:d3",
+ .gpio = RW2458N_GPIO_LED_D3,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d4",
+ .gpio = RW2458N_GPIO_LED_D4,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d5",
+ .gpio = RW2458N_GPIO_LED_D5,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d6",
+ .gpio = RW2458N_GPIO_LED_D6,
+ .active_low = 1,
+ }
+};
+
+static void __init rw2458n_setup(void)
+{
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio),
+ rw2458n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rw2458n_gpio_keys),
+ rw2458n_gpio_keys);
+ ath79_register_usb();
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N",
+ rw2458n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-632brp.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-632brp.c
new file mode 100644
index 0000000..855664e
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-632brp.c
@@ -0,0 +1,111 @@
+/*
+ * TrendNET TEW-632BRP board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define TEW_632BRP_GPIO_LED_STATUS 1
+#define TEW_632BRP_GPIO_LED_WPS 3
+#define TEW_632BRP_GPIO_LED_WLAN 6
+#define TEW_632BRP_GPIO_BTN_WPS 12
+#define TEW_632BRP_GPIO_BTN_RESET 21
+
+#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
+
+#define TEW_632BRP_CONFIG_ADDR 0x1f020000
+#define TEW_632BRP_CONFIG_SIZE 0x10000
+
+static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
+ {
+ .name = "tew-632brp:green:status",
+ .gpio = TEW_632BRP_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "tew-632brp:blue:wps",
+ .gpio = TEW_632BRP_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "tew-632brp:green:wlan",
+ .gpio = TEW_632BRP_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_632BRP_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_632BRP_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+#define TEW_632BRP_LAN_PHYMASK BIT(0)
+#define TEW_632BRP_WAN_PHYMASK BIT(4)
+#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \
+ TEW_632BRP_WAN_PHYMASK))
+
+static void __init tew_632brp_setup(void)
+{
+ const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+ u8 *wlan_mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
+ "lan_mac=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ wlan_mac = mac;
+ }
+
+ ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
+ tew_632brp_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew_632brp_gpio_keys),
+ tew_632brp_gpio_keys);
+
+ ath79_register_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
+ tew_632brp_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-673gru.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-673gru.c
new file mode 100644
index 0000000..80a5443
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-673gru.c
@@ -0,0 +1,198 @@
+/*
+ * TRENDnet TEW-673GRU board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TEW673GRU_GPIO_LCD_SCK 0
+#define TEW673GRU_GPIO_LCD_MOSI 1
+#define TEW673GRU_GPIO_LCD_MISO 2
+#define TEW673GRU_GPIO_LCD_CS 6
+
+#define TEW673GRU_GPIO_LED_WPS 9
+
+#define TEW673GRU_GPIO_BTN_RESET 3
+#define TEW673GRU_GPIO_BTN_WPS 8
+
+#define TEW673GRU_GPIO_RTL8366_SDA 5
+#define TEW673GRU_GPIO_RTL8366_SCK 7
+
+#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL)
+
+#define TEW673GRU_CAL0_OFFSET 0x1000
+#define TEW673GRU_CAL1_OFFSET 0x5000
+#define TEW673GRU_MAC0_OFFSET 0xffa0
+#define TEW673GRU_MAC1_OFFSET 0xffb4
+
+#define TEW673GRU_CAL_LOCATION_0 0x1f660000
+#define TEW673GRU_CAL_LOCATION_1 0x1f7f0000
+
+static struct gpio_led tew673gru_leds_gpio[] __initdata = {
+ {
+ .name = "trendnet:blue:wps",
+ .gpio = TEW673GRU_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW673GRU_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW673GRU_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = {
+ { .reg = 0x06, .val = 0x0108 },
+};
+
+static struct rtl8366_platform_data tew673gru_rtl8366s_data = {
+ .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA,
+ .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK,
+ .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals),
+ .initvals = tew673gru_rtl8366s_initvals,
+};
+
+static struct platform_device tew673gru_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tew673gru_rtl8366s_data,
+ }
+};
+
+static struct spi_board_info tew673gru_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 400000,
+ .modalias = "spidev",
+ .mode = SPI_MODE_2,
+ .controller_data = (void *) TEW673GRU_GPIO_LCD_CS,
+ },
+};
+
+static struct spi_gpio_platform_data tew673gru_spi_data = {
+ .sck = TEW673GRU_GPIO_LCD_SCK,
+ .miso = TEW673GRU_GPIO_LCD_MISO,
+ .mosi = TEW673GRU_GPIO_LCD_MOSI,
+ .num_chipselect = 1,
+};
+
+static struct platform_device tew673gru_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &tew673gru_spi_data,
+ },
+};
+
+static bool __init tew673gru_is_caldata_valid(u8 *p)
+{
+ u16 *magic0, *magic1;
+
+ magic0 = (u16 *)(p + TEW673GRU_CAL0_OFFSET);
+ magic1 = (u16 *)(p + TEW673GRU_CAL1_OFFSET);
+
+ return (*magic0 == 0xa55a && *magic1 == 0xa55a);
+}
+
+static void __init tew673gru_wlan_init(void)
+{
+ u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+ u8 *caldata;
+
+ caldata = (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0);
+ if (!tew673gru_is_caldata_valid(caldata)) {
+ caldata = (u8 *)KSEG1ADDR(TEW673GRU_CAL_LOCATION_1);
+ if (!tew673gru_is_caldata_valid(caldata)) {
+ pr_err("no calibration data found\n");
+ return;
+ }
+ }
+
+ ath79_parse_ascii_mac(caldata + TEW673GRU_MAC0_OFFSET, mac1);
+ ath79_parse_ascii_mac(caldata + TEW673GRU_MAC1_OFFSET, mac2);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap94_pci_init(caldata + TEW673GRU_CAL0_OFFSET, mac1,
+ caldata + TEW673GRU_CAL1_OFFSET, mac2);
+}
+
+static void __init tew673gru_setup(void)
+{
+ tew673gru_wlan_init();
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+
+ ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio),
+ tew673gru_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew673gru_gpio_keys),
+ tew673gru_gpio_keys);
+
+ ath79_register_usb();
+
+ platform_device_register(&tew673gru_rtl8366s_device);
+
+ spi_register_board_info(tew673gru_spi_info,
+ ARRAY_SIZE(tew673gru_spi_info));
+ platform_device_register(&tew673gru_spi_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU",
+ tew673gru_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-712br.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-712br.c
new file mode 100644
index 0000000..304b994
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-712br.c
@@ -0,0 +1,153 @@
+/*
+ * TRENDnet TEW-712BR board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TEW_712BR_GPIO_BTN_WPS 11
+#define TEW_712BR_GPIO_BTN_RESET 12
+
+#define TEW_712BR_GPIO_LED_LAN1 13
+#define TEW_712BR_GPIO_LED_LAN2 14
+#define TEW_712BR_GPIO_LED_LAN3 15
+#define TEW_712BR_GPIO_LED_LAN4 16
+#define TEW_712BR_GPIO_LED_POWER_GREEN 20
+#define TEW_712BR_GPIO_LED_POWER_ORANGE 27
+#define TEW_712BR_GPIO_LED_WAN_GREEN 17
+#define TEW_712BR_GPIO_LED_WAN_ORANGE 23
+#define TEW_712BR_GPIO_LED_WLAN 0
+#define TEW_712BR_GPIO_LED_WPS 26
+
+#define TEW_712BR_GPIO_WAN_LED_ENABLE 1
+
+#define TEW_712BR_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW_712BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_712BR_KEYS_POLL_INTERVAL)
+
+#define TEW_712BR_ART_ADDRESS 0x1f010000
+#define TEW_712BR_CALDATA_OFFSET 0x1000
+
+#define TEW_712BR_MAC_PART_ADDRESS 0x1f020000
+#define TEW_712BR_LAN_MAC_OFFSET 0x04
+#define TEW_712BR_WAN_MAC_OFFSET 0x16
+
+static struct gpio_led tew_712br_leds_gpio[] __initdata = {
+ {
+ .name = "trendnet:green:lan1",
+ .gpio = TEW_712BR_GPIO_LED_LAN1,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:lan2",
+ .gpio = TEW_712BR_GPIO_LED_LAN2,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:lan3",
+ .gpio = TEW_712BR_GPIO_LED_LAN3,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:lan4",
+ .gpio = TEW_712BR_GPIO_LED_LAN4,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:blue:wps",
+ .gpio = TEW_712BR_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "trendnet:green:power",
+ .gpio = TEW_712BR_GPIO_LED_POWER_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:orange:power",
+ .gpio = TEW_712BR_GPIO_LED_POWER_ORANGE,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:wan",
+ .gpio = TEW_712BR_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "trendnet:orange:wan",
+ .gpio = TEW_712BR_GPIO_LED_WAN_ORANGE,
+ .active_low = 0,
+ }, {
+ .name = "trendnet:green:wlan",
+ .gpio = TEW_712BR_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tew_712br_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_712BR_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_712BR_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init tew_712br_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(TEW_712BR_ART_ADDRESS);
+ u8 *mac = (u8 *) KSEG1ADDR(TEW_712BR_MAC_PART_ADDRESS);
+ u8 lan_mac[ETH_ALEN];
+ u8 wan_mac[ETH_ALEN];
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ gpio_request_one(TEW_712BR_GPIO_WAN_LED_ENABLE,
+ GPIOF_OUT_INIT_LOW, "WAN LED enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_712br_leds_gpio),
+ tew_712br_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TEW_712BR_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew_712br_gpio_keys),
+ tew_712br_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_parse_ascii_mac(mac + TEW_712BR_LAN_MAC_OFFSET, lan_mac);
+ ath79_parse_ascii_mac(mac + TEW_712BR_WAN_MAC_OFFSET, wan_mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + TEW_712BR_CALDATA_OFFSET, wan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_712BR, "TEW-712BR",
+ "TRENDnet TEW-712BR", tew_712br_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-732br.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-732br.c
new file mode 100644
index 0000000..1f26f6f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tew-732br.c
@@ -0,0 +1,127 @@
+/*
+ * TRENDnet TEW-732BR board support
+ *
+ * Copyright (C) 2013 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TEW_732BR_GPIO_BTN_WPS 16
+#define TEW_732BR_GPIO_BTN_RESET 17
+
+#define TEW_732BR_GPIO_LED_POWER_GREEN 4
+#define TEW_732BR_GPIO_LED_POWER_AMBER 14
+#define TEW_732BR_GPIO_LED_PLANET_GREEN 12
+#define TEW_732BR_GPIO_LED_PLANET_AMBER 22
+
+#define TEW_732BR_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW_732BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_732BR_KEYS_POLL_INTERVAL)
+
+#define TEW_732BR_ART_ADDRESS 0x1fff0000
+#define TEW_732BR_CALDATA_OFFSET 0x1000
+#define TEW_732BR_LAN_MAC_OFFSET 0xffa0
+#define TEW_732BR_WAN_MAC_OFFSET 0xffb4
+
+static struct gpio_led tew_732br_leds_gpio[] __initdata = {
+ {
+ .name = "trendnet:green:power",
+ .gpio = TEW_732BR_GPIO_LED_POWER_GREEN,
+ .active_low = 0,
+ },
+ {
+ .name = "trendnet:amber:power",
+ .gpio = TEW_732BR_GPIO_LED_POWER_AMBER,
+ .active_low = 0,
+ },
+ {
+ .name = "trendnet:green:wan",
+ .gpio = TEW_732BR_GPIO_LED_PLANET_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "trendnet:amber:wan",
+ .gpio = TEW_732BR_GPIO_LED_PLANET_AMBER,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tew_732br_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_732BR_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_732BR_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static void __init tew_732br_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(TEW_732BR_ART_ADDRESS);
+ u8 lan_mac[ETH_ALEN];
+ u8 wan_mac[ETH_ALEN];
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_732br_leds_gpio),
+ tew_732br_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TEW_732BR_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew_732br_gpio_keys),
+ tew_732br_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_parse_ascii_mac(art + TEW_732BR_LAN_MAC_OFFSET, lan_mac);
+ ath79_parse_ascii_mac(art + TEW_732BR_WAN_MAC_OFFSET, wan_mac);
+
+ ath79_register_wmac(art + TEW_732BR_CALDATA_OFFSET, lan_mac);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ /* LAN: GMAC1 is connected to the internal switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+
+ ath79_register_eth(1);
+
+ /* WAN: GMAC0 is connected to the PHY4 of the internal switch */
+ ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_732BR, "TEW-732BR", "TRENDnet TEW-732BR",
+ tew_732br_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr11u.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr11u.c
new file mode 100644
index 0000000..74ccf63
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr11u.c
@@ -0,0 +1,183 @@
+/*
+ * TP-LINK TL-MR11U/TL-MR3040 board support
+ *
+ * Copyright (C) 2011 dongyuqi <***@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR11U_GPIO_LED_3G 27
+#define TL_MR11U_GPIO_LED_WLAN 26
+#define TL_MR11U_GPIO_LED_LAN 17
+
+#define TL_MR11U_GPIO_BTN_WPS 20
+#define TL_MR11U_GPIO_BTN_RESET 11
+
+#define TL_MR11U_GPIO_USB_POWER 8
+#define TL_MR3040_GPIO_USB_POWER 18
+
+#define TL_MR3040_V2_GPIO_BTN_SW1 19
+#define TL_MR3040_V2_GPIO_BTN_SW2 20
+
+#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr11u_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr11u_flash_data = {
+ .part_probes = tl_mr11u_part_probes,
+};
+
+static struct gpio_led tl_mr11u_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR11U_GPIO_LED_3G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_MR11U_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_MR11U_GPIO_LED_LAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR11U_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR11U_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tl_mr3040_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR11U_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw1",
+ .type = EV_SW,
+ .code = BTN_0,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3040_V2_GPIO_BTN_SW1,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw2",
+ .type = EV_SW,
+ .code = BTN_1,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3040_V2_GPIO_BTN_SW2,
+ .active_low = 0,
+ }
+};
+
+static void __init common_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* Disable hardware control LAN1 and LAN2 LEDs, enabling GPIO14 and GPIO15 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_m25p80(&tl_mr11u_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio),
+ tl_mr11u_leds_gpio);
+
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_mr11u_setup(void)
+{
+ common_setup();
+
+ ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr11u_gpio_keys),
+ tl_mr11u_gpio_keys);
+ gpio_request_one(TL_MR11U_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U",
+ tl_mr11u_setup);
+
+static void __init tl_mr3040_setup(void)
+{
+ common_setup();
+
+ ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
+ 1, tl_mr11u_gpio_keys);
+ gpio_request_one(TL_MR3040_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3040, "TL-MR3040", "TP-LINK TL-MR3040",
+ tl_mr3040_setup);
+
+static void __init tl_mr3040_v2_setup(void)
+{
+ common_setup();
+
+ ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3040_v2_gpio_keys),
+ tl_mr3040_v2_gpio_keys);
+ gpio_request_one(TL_MR3040_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3040_V2, "TL-MR3040-v2", "TP-LINK TL-MR3040 v2",
+ tl_mr3040_v2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr13u.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr13u.c
new file mode 100644
index 0000000..8b03645
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr13u.c
@@ -0,0 +1,107 @@
+/*
+ * TP-LINK TL-MR13U board support
+ *
+ * Copyright (C) 2011 dongyuqi <***@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR13U_GPIO_LED_SYSTEM 27
+
+#define TL_MR13U_GPIO_BTN_RESET 11
+#define TL_MR13U_GPIO_BTN_SW1 6
+#define TL_MR13U_GPIO_BTN_SW2 7
+
+#define TL_MR13U_GPIO_USB_POWER 18
+
+#define TL_MR13U_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR13U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR13U_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr13u_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr13u_flash_data = {
+ .part_probes = tl_mr13u_part_probes,
+};
+
+static struct gpio_led tl_mr13u_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:system",
+ .gpio = TL_MR13U_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_mr13u_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR13U_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR13U_GPIO_BTN_SW1,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR13U_GPIO_BTN_SW2,
+ .active_low = 0,
+ },
+};
+
+static void __init tl_mr13u_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_m25p80(&tl_mr13u_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr13u_leds_gpio),
+ tl_mr13u_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_MR13U_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr13u_gpio_keys),
+ tl_mr13u_gpio_keys);
+
+ gpio_request_one(TL_MR13U_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR13U, "TL-MR13U", "TP-LINK TL-MR13U v1",
+ tl_mr13u_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3020.c
new file mode 100644
index 0000000..0a9dfbc
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3020.c
@@ -0,0 +1,126 @@
+/*
+ * TP-LINK TL-MR3020 board support
+ *
+ * Copyright (C) 2011 dongyuqi <***@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR3020_GPIO_LED_3G 27
+#define TL_MR3020_GPIO_LED_WLAN 0
+#define TL_MR3020_GPIO_LED_LAN 17
+#define TL_MR3020_GPIO_LED_WPS 26
+
+#define TL_MR3020_GPIO_BTN_WPS 11
+#define TL_MR3020_GPIO_BTN_SW1 18
+#define TL_MR3020_GPIO_BTN_SW2 20
+
+#define TL_MR3020_GPIO_USB_POWER 8
+
+#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr3020_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr3020_flash_data = {
+ .part_probes = tl_mr3020_part_probes,
+};
+
+static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3020_GPIO_LED_3G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_MR3020_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_MR3020_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wps",
+ .gpio = TL_MR3020_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_SW1,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_SW2,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_mr3020_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_m25p80(&tl_mr3020_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
+ tl_mr3020_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3020_gpio_keys),
+ tl_mr3020_gpio_keys);
+
+ gpio_request_one(TL_MR3020_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020",
+ tl_mr3020_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3x20.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3x20.c
new file mode 100644
index 0000000..5924ac5
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-mr3x20.c
@@ -0,0 +1,147 @@
+/*
+ * TP-LINK TL-MR3220/3420 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TL_MR3X20_GPIO_LED_QSS 0
+#define TL_MR3X20_GPIO_LED_SYSTEM 1
+#define TL_MR3X20_GPIO_LED_3G 8
+
+#define TL_MR3X20_GPIO_BTN_RESET 11
+#define TL_MR3X20_GPIO_BTN_QSS 12
+
+#define TL_MR3X20_GPIO_USB_POWER 6
+
+#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr3x20_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr3x20_flash_data = {
+ .part_probes = tl_mr3x20_part_probes,
+};
+
+static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_MR3X20_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_MR3X20_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3X20_GPIO_LED_3G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3X20_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3X20_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_ap99_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_mr3x20_flash_data);
+
+ ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3x20_gpio_keys),
+ tl_mr3x20_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap91_pci_init(ee, mac);
+}
+
+static void __init tl_mr3x20_usb_setup(void)
+{
+ /* enable power for the USB port */
+ gpio_request_one(TL_MR3X20_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+}
+
+static void __init tl_mr3220_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ tl_mr3x20_usb_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
+ tl_mr3220_setup);
+
+static void __init tl_mr3420_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ tl_mr3x20_usb_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
+ tl_mr3420_setup);
+
+static void __init tl_wr841n_v7_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7",
+ "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa830re-v2.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa830re-v2.c
new file mode 100644
index 0000000..1c74fed
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa830re-v2.c
@@ -0,0 +1,132 @@
+/*
+ * TP-LINK TL-WA830RE v2 board support
+ *
+ * Copyright (C) 2014 Fredrik Jonson <***@famjonson.se>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WA830REV2_GPIO_LED_WLAN 13
+#define TL_WA830REV2_GPIO_LED_QSS 15
+#define TL_WA830REV2_GPIO_LED_LAN 18
+#define TL_WA830REV2_GPIO_LED_SYSTEM 14
+
+#define TL_WA830REV2_GPIO_BTN_RESET 17
+#define TL_WA830REV2_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */
+
+#define TL_WA830REV2_GPIO_USB_POWER 4
+
+#define TL_WA830REV2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa830re_v2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa830re_v2_flash_data = {
+ .part_probes = tl_wa830re_v2_part_probes,
+};
+
+static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA830REV2_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA830REV2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA830REV2_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WA830REV2_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA830REV2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA830REV2_GPIO_SW_RFKILL,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_ap123_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* Disable JTAG, enabling GPIOs 0-3 */
+ /* Configure OBS4 line, for GPIO 4*/
+ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+ AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ /* config gpio4 as normal gpio function */
+ ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER,
+ AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_m25p80(&tl_wa830re_v2_flash_data);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ /* GMAC0 is connected to the PHY0 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_wa830re_v2_setup(void)
+{
+ tl_ap123_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1,
+ tl_wa830re_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa830re_v2_gpio_keys),
+ tl_wa830re_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2",
+ tl_wa830re_v2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd-v2.c
new file mode 100644
index 0000000..b4fb2a9
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd-v2.c
@@ -0,0 +1,104 @@
+/*
+ * TP-LINK TL-WA901N/ND v2 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <***@hollants.com>
+ * Copyright (C) 2011 Jonathan Bennett <***@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WA901ND_V2_GPIO_LED_QSS 4
+#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2
+#define TL_WA901ND_V2_GPIO_LED_WLAN 9
+
+#define TL_WA901ND_V2_GPIO_BTN_RESET 3
+#define TL_WA901ND_V2_GPIO_BTN_QSS 7
+
+#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa901nd_v2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa901nd_v2_flash_data = {
+ .part_probes = tl_wa901nd_v2_part_probes,
+};
+
+static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA901ND_V2_GPIO_LED_QSS,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WA901ND_V2_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_V2_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wa901nd_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x00001000;
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
+ AR71XX_RESET_GE0_PHY;
+ ath79_register_eth(0);
+
+ ath79_register_m25p80(&tl_wa901nd_v2_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
+ tl_wa901nd_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
+ tl_wa901nd_v2_gpio_keys);
+
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
+ "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd.c
new file mode 100644
index 0000000..957b92c
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wa901nd.c
@@ -0,0 +1,127 @@
+/*
+ * TP-LINK TL-WA901N/ND v1, TL-WA7510N v1 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <***@hollants.com>
+ * Copyright (C) 2012 Stefan Helmert <***@aol.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define TL_WA901ND_GPIO_LED_QSS 0
+#define TL_WA901ND_GPIO_LED_SYSTEM 1
+#define TL_WA901ND_GPIO_LED_LAN 13
+
+#define TL_WA901ND_GPIO_BTN_RESET 11
+#define TL_WA901ND_GPIO_BTN_QSS 12
+
+#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa901nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa901nd_flash_data = {
+ .part_probes = tl_wa901nd_part_probes,
+};
+
+static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA901ND_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA901ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA901ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init common_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ /*
+ * ath79_eth0 would be the WAN port, but is not connected.
+ * ath79_eth1 connects to the internal switch chip, however
+ * we have a single LAN port only.
+ */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&tl_wa901nd_flash_data);
+}
+
+static void __init tl_wa901nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
+ tl_wa901nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_gpio_keys),
+ tl_wa901nd_gpio_keys);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
+ tl_wa901nd_setup);
+
+static void __init tl_wa7510n_v1_setup(void)
+{
+ common_setup();
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA7510N_V1, "TL-WA7510N", "TP-LINK TL-WA7510N v1",
+ tl_wa7510n_v1_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wax50re.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wax50re.c
new file mode 100644
index 0000000..965b1cd
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wax50re.c
@@ -0,0 +1,313 @@
+/*
+ * TP-LINK TL-WA750RE v1/TL-WA801ND v2/TL-WA850RE v1/TL-WA901ND v3
+ * board support
+ *
+ * Copyright (C) 2013 Martijn Zilverschoon <***@gmail.com>
+ * Copyright (C) 2013 Jiri Pirko <***@resnulli.us>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WAX50RE_GPIO_LED_LAN 20
+#define TL_WAX50RE_GPIO_LED_WLAN 13
+#define TL_WAX50RE_GPIO_LED_RE 15
+#define TL_WAX50RE_GPIO_LED_SIGNAL1 0
+#define TL_WAX50RE_GPIO_LED_SIGNAL2 1
+#define TL_WAX50RE_GPIO_LED_SIGNAL3 2
+#define TL_WAX50RE_GPIO_LED_SIGNAL4 3
+#define TL_WAX50RE_GPIO_LED_SIGNAL5 4
+
+#define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0
+#define TL_WA860RE_GPIO_LED_WLAN_GREEN 2
+#define TL_WA860RE_GPIO_LED_POWER_ORANGE 12
+#define TL_WA860RE_GPIO_LED_POWER_GREEN 14
+#define TL_WA860RE_GPIO_LED_LAN 20
+
+#define TL_WA801ND_V2_GPIO_LED_LAN 18
+#define TL_WA801ND_V2_GPIO_LED_SYSTEM 14
+
+#define TL_WAX50RE_GPIO_BTN_RESET 17
+#define TL_WAX50RE_GPIO_BTN_WPS 16
+
+#define TL_WA860RE_GPIO_BTN_RESET 17
+#define TL_WA860RE_GPIO_BTN_WPS 16
+#define TL_WA860RE_GPIO_BTN_ONOFF 11
+
+#define TL_WAX50RE_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL (3 * TL_WAX50RE_KEYS_POLL_INTERVAL)
+
+static const char *tl_wax50re_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wax50re_flash_data = {
+ .part_probes = tl_wax50re_part_probes,
+};
+
+static struct gpio_led tl_wa750re_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:orange:lan",
+ .gpio = TL_WAX50RE_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:wlan",
+ .gpio = TL_WAX50RE_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:re",
+ .gpio = TL_WAX50RE_GPIO_LED_RE,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:signal1",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:signal2",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:signal3",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:signal4",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:signal5",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led tl_wa850re_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:lan",
+ .gpio = TL_WAX50RE_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:wlan",
+ .gpio = TL_WAX50RE_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:re",
+ .gpio = TL_WAX50RE_GPIO_LED_RE,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal1",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal2",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal3",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal4",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:blue:signal5",
+ .gpio = TL_WAX50RE_GPIO_LED_SIGNAL5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA860RE_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:power",
+ .gpio = TL_WA860RE_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:power",
+ .gpio = TL_WA860RE_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WA860RE_GPIO_LED_WLAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:orange:wlan",
+ .gpio = TL_WA860RE_GPIO_LED_WLAN_ORANGE,
+ .active_low = 1,
+ },
+};
+
+
+static struct gpio_keys_button tl_wax50re_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WAX50RE_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WAX50RE_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wa860re_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA860RE_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA860RE_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "ONOFF",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA860RE_GPIO_BTN_ONOFF,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led tl_wa801nd_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA801ND_V2_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WAX50RE_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WAX50RE_GPIO_LED_RE,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA801ND_V2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static void __init tl_ap123_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wax50re_flash_data);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_wa750re_setup(void)
+{
+ tl_ap123_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa750re_leds_gpio),
+ tl_wa750re_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wax50re_gpio_keys),
+ tl_wax50re_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA750RE, "TL-WA750RE", "TP-LINK TL-WA750RE",
+ tl_wa750re_setup);
+
+static void __init tl_wa801nd_v2_setup(void)
+{
+ tl_ap123_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
+ tl_wa801nd_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wax50re_gpio_keys),
+ tl_wax50re_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V2, "TL-WA801ND-v2", "TP-LINK TL-WA801ND v2",
+ tl_wa801nd_v2_setup);
+
+static void __init tl_wa850re_setup(void)
+{
+ tl_ap123_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_leds_gpio),
+ tl_wa850re_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wax50re_gpio_keys),
+ tl_wax50re_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE",
+ tl_wa850re_setup);
+
+static void __init tl_wa860re_setup(void)
+{
+ tl_ap123_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa860re_leds_gpio),
+ tl_wa860re_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa860re_gpio_keys),
+ tl_wa860re_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA860RE, "TL-WA860RE", "TP-LINK TL-WA860RE",
+ tl_wa860re_setup);
+
+static void __init tl_wa901nd_v3_setup(void)
+{
+ tl_ap123_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
+ tl_wa801nd_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wax50re_gpio_keys) - 1,
+ tl_wax50re_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V3, "TL-WA901ND-v3", "TP-LINK TL-WA901ND v3",
+ tl_wa901nd_v3_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr3500.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr3500.c
new file mode 100644
index 0000000..452c20b
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr3500.c
@@ -0,0 +1,169 @@
+/*
+ * TP-LINK TL-WDR3500 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2013 Gui Iribarren <***@altermundi.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WDR3500_GPIO_LED_USB 11
+#define WDR3500_GPIO_LED_WLAN2G 13
+#define WDR3500_GPIO_LED_SYSTEM 14
+#define WDR3500_GPIO_LED_QSS 15
+#define WDR3500_GPIO_LED_WAN 18
+#define WDR3500_GPIO_LED_LAN1 19
+#define WDR3500_GPIO_LED_LAN2 20
+#define WDR3500_GPIO_LED_LAN3 21
+#define WDR3500_GPIO_LED_LAN4 22
+
+#define WDR3500_GPIO_BTN_WPS 16
+#define WDR3500_GPIO_BTN_RFKILL 17
+
+#define WDR3500_GPIO_USB_POWER 12
+
+#define WDR3500_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WDR3500_KEYS_DEBOUNCE_INTERVAL (3 * WDR3500_KEYS_POLL_INTERVAL)
+
+#define WDR3500_MAC0_OFFSET 0
+#define WDR3500_MAC1_OFFSET 6
+#define WDR3500_WMAC_CALDATA_OFFSET 0x1000
+#define WDR3500_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *wdr3500_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data wdr3500_flash_data = {
+ .part_probes = wdr3500_part_probes,
+};
+
+static struct gpio_led wdr3500_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:qss",
+ .gpio = WDR3500_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:system",
+ .gpio = WDR3500_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb",
+ .gpio = WDR3500_GPIO_LED_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan2g",
+ .gpio = WDR3500_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wdr3500_gpio_keys[] __initdata = {
+ {
+ .desc = "QSS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR3500_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR3500_GPIO_BTN_RFKILL,
+ },
+};
+
+
+static void __init wdr3500_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&wdr3500_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3500_leds_gpio),
+ wdr3500_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WDR3500_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wdr3500_gpio_keys),
+ wdr3500_gpio_keys);
+
+ ath79_init_mac(tmpmac, mac, 0);
+ ath79_register_wmac(art + WDR3500_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_init_mac(tmpmac, mac, 1);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ ap91_pci_init(art + WDR3500_PCIE_CALDATA_OFFSET, tmpmac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* LAN */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2);
+
+ /* GMAC0 is connected to the PHY4 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ ath79_register_eth(0);
+
+ gpio_request_one(WDR3500_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_gpio_output_select(WDR3500_GPIO_LED_LAN1,
+ AR934X_GPIO_OUT_LED_LINK3);
+ ath79_gpio_output_select(WDR3500_GPIO_LED_LAN2,
+ AR934X_GPIO_OUT_LED_LINK2);
+ ath79_gpio_output_select(WDR3500_GPIO_LED_LAN3,
+ AR934X_GPIO_OUT_LED_LINK1);
+ ath79_gpio_output_select(WDR3500_GPIO_LED_LAN4,
+ AR934X_GPIO_OUT_LED_LINK0);
+ ath79_gpio_output_select(WDR3500_GPIO_LED_WAN,
+ AR934X_GPIO_OUT_LED_LINK4);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR3500, "TL-WDR3500",
+ "TP-LINK TL-WDR3500",
+ wdr3500_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr4300.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr4300.c
new file mode 100644
index 0000000..99ae80d
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wdr4300.c
@@ -0,0 +1,205 @@
+/*
+ * TP-LINK TL-WDR4300 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WDR4300_GPIO_LED_USB1 11
+#define WDR4300_GPIO_LED_USB2 12
+#define WDR4300_GPIO_LED_WLAN2G 13
+#define WDR4300_GPIO_LED_SYSTEM 14
+#define WDR4300_GPIO_LED_QSS 15
+
+#define WDR4300_GPIO_BTN_WPS 16
+#define WDR4300_GPIO_BTN_RFKILL 17
+
+#define WDR4300_GPIO_EXTERNAL_LNA0 18
+#define WDR4300_GPIO_EXTERNAL_LNA1 19
+
+#define WDR4300_GPIO_USB1_POWER 22
+#define WDR4300_GPIO_USB2_POWER 21
+
+#define WDR4300_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WDR4300_KEYS_POLL_INTERVAL)
+
+#define WDR4300_MAC0_OFFSET 0
+#define WDR4300_MAC1_OFFSET 6
+#define WDR4300_WMAC_CALDATA_OFFSET 0x1000
+#define WDR4300_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *wdr4300_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data wdr4300_flash_data = {
+ .part_probes = wdr4300_part_probes,
+};
+
+static struct gpio_led wdr4300_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:qss",
+ .gpio = WDR4300_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:system",
+ .gpio = WDR4300_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb1",
+ .gpio = WDR4300_GPIO_LED_USB1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb2",
+ .gpio = WDR4300_GPIO_LED_USB2,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wlan2g",
+ .gpio = WDR4300_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wdr4300_gpio_keys[] __initdata = {
+ {
+ .desc = "QSS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR4300_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WDR4300_GPIO_BTN_RFKILL,
+ },
+};
+
+static const struct ar8327_led_info wdr4300_leds_ar8327[] __initconst = {
+ AR8327_LED_INFO(PHY0_0, HW, "tp-link:blue:wan"),
+ AR8327_LED_INFO(PHY1_0, HW, "tp-link:blue:lan1"),
+ AR8327_LED_INFO(PHY2_0, HW, "tp-link:blue:lan2"),
+ AR8327_LED_INFO(PHY3_0, HW, "tp-link:blue:lan3"),
+ AR8327_LED_INFO(PHY4_0, HW, "tp-link:blue:lan4"),
+};
+
+static struct ar8327_pad_cfg wdr4300_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg wdr4300_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data wdr4300_ar8327_data = {
+ .pad0_cfg = &wdr4300_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wdr4300_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(wdr4300_leds_ar8327),
+ .leds = wdr4300_leds_ar8327,
+};
+
+static struct mdio_board_info wdr4300_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wdr4300_ar8327_data,
+ },
+};
+
+static void __init wdr4300_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&wdr4300_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4300_leds_gpio),
+ wdr4300_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WDR4300_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wdr4300_gpio_keys),
+ wdr4300_gpio_keys);
+
+ ath79_wmac_set_ext_lna_gpio(0, WDR4300_GPIO_EXTERNAL_LNA0);
+ ath79_wmac_set_ext_lna_gpio(1, WDR4300_GPIO_EXTERNAL_LNA1);
+
+ ath79_init_mac(tmpmac, mac, -1);
+ ath79_register_wmac(art + WDR4300_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_init_mac(tmpmac, mac, 0);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ ap91_pci_init(art + WDR4300_PCIE_CALDATA_OFFSET, tmpmac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(wdr4300_mdio0_info,
+ ARRAY_SIZE(wdr4300_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ gpio_request_one(WDR4300_GPIO_USB1_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB1 power");
+ gpio_request_one(WDR4300_GPIO_USB2_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB2 power");
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR4300, "TL-WDR4300",
+ "TP-LINK TL-WDR3600/4300/4310",
+ wdr4300_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1041n-v2.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1041n-v2.c
new file mode 100644
index 0000000..fa8c474
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1041n-v2.c
@@ -0,0 +1,138 @@
+/*
+ * TP-LINK TL-WR1041 v2 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2011-2012 Anan Huang <***@foxmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR1041NV2_GPIO_BTN_RESET 14
+#define TL_WR1041NV2_GPIO_LED_WPS 13
+#define TL_WR1041NV2_GPIO_LED_WLAN 11
+
+#define TL_WR1041NV2_GPIO_LED_SYSTEM 12
+
+#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
+
+#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *tl_wr1041nv2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr1041nv2_flash_data = {
+ .part_probes = tl_wr1041nv2_part_probes,
+};
+
+static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1041NV2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR1041NV2_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1041NV2_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1041NV2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data db120_ar8327_data = {
+ .pad0_cfg = &db120_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ }
+};
+
+static struct mdio_board_info db120_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &db120_ar8327_data,
+ },
+};
+
+static void __init tl_wr1041nv2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr1041nv2_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
+ tl_wr1041nv2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
+ tl_wr1041nv2_gpio_keys);
+ ath79_register_wmac(ee, mac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+
+ mdiobus_register_board_info(db120_mdio0_info,
+ ARRAY_SIZE(db120_mdio0_info));
+
+ /* GMAC0 is connected to an AR8327 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
+ "TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd-v2.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd-v2.c
new file mode 100644
index 0000000..4f873e2
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd-v2.c
@@ -0,0 +1,217 @@
+/*
+ * TP-LINK TL-WR1043ND v2 board support
+ *
+ * Copyright (c) 2013 Gabor Juhos <***@openwrt.org>
+ *
+ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
+ * Copyright (c) 2012 Qualcomm Atheros
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR1043_V2_GPIO_LED_WLAN 12
+#define TL_WR1043_V2_GPIO_LED_USB 15
+#define TL_WR1043_V2_GPIO_LED_WPS 18
+#define TL_WR1043_V2_GPIO_LED_SYSTEM 19
+
+#define TL_WR1043_V2_GPIO_BTN_RESET 16
+#define TL_WR1043_V2_GPIO_BTN_WLAN 17
+
+#define TL_WR1043_V2_GPIO_USB_POWER 21
+
+#define TL_WR1043_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V2_KEYS_POLL_INTERVAL)
+
+#define TL_WR1043_V2_WMAC_CALDATA_OFFSET 0x1000
+
+static const char *wr1043nd_v2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data wr1043nd_v2_flash_data = {
+ .part_probes = wr1043nd_v2_part_probes,
+};
+
+static struct gpio_led tl_wr1043_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR1043_V2_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1043_V2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1043_V2_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR1043_V2_GPIO_LED_USB,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr1043_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WLAN button",
+ .type = EV_KEY,
+ .code = KEY_WLAN,
+ .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043_V2_GPIO_BTN_WLAN,
+ .active_low = 1,
+ },
+};
+
+static const struct ar8327_led_info tl_wr1043_leds_ar8327[] = {
+ AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:lan4"),
+ AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan3"),
+ AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
+ AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan1"),
+ AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:wan"),
+};
+
+/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
+static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
+static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg wr1043nd_v2_ar8327_led_cfg = {
+ .led_ctrl0 = 0xcc35cc35,
+ .led_ctrl1 = 0xca35ca35,
+ .led_ctrl2 = 0xc935c935,
+ .led_ctrl3 = 0x03ffff00,
+ .open_drain = true,
+};
+
+static struct ar8327_platform_data wr1043nd_v2_ar8327_data = {
+ .pad0_cfg = &wr1043nd_v2_ar8327_pad0_cfg,
+ .pad6_cfg = &wr1043nd_v2_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wr1043nd_v2_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(tl_wr1043_leds_ar8327),
+ .leds = tl_wr1043_leds_ar8327,
+};
+
+static struct mdio_board_info wr1043nd_v2_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wr1043nd_v2_ar8327_data,
+ },
+};
+
+static void __init tl_wr1043nd_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&wr1043nd_v2_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043_v2_leds_gpio),
+ tl_wr1043_v2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR1043_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043_v2_gpio_keys),
+ tl_wr1043_v2_gpio_keys);
+
+ ath79_init_mac(tmpmac, mac, -1);
+ ath79_register_wmac(art + TL_WR1043_V2_WMAC_CALDATA_OFFSET, tmpmac);
+
+ mdiobus_register_board_info(wr1043nd_v2_mdio0_info,
+ ARRAY_SIZE(wr1043nd_v2_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ gpio_request_one(TL_WR1043_V2_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V2, "TL-WR1043ND-v2",
+ "TP-LINK TL-WR1043ND v2", tl_wr1043nd_v2_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd.c
new file mode 100644
index 0000000..61aeb52
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr1043nd.c
@@ -0,0 +1,141 @@
+/*
+ * TP-LINK TL-WR1043N/ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR1043ND_GPIO_LED_USB 1
+#define TL_WR1043ND_GPIO_LED_SYSTEM 2
+#define TL_WR1043ND_GPIO_LED_QSS 5
+#define TL_WR1043ND_GPIO_LED_WLAN 9
+
+#define TL_WR1043ND_GPIO_BTN_RESET 3
+#define TL_WR1043ND_GPIO_BTN_QSS 7
+
+#define TL_WR1043ND_GPIO_RTL8366_SDA 18
+#define TL_WR1043ND_GPIO_RTL8366_SCK 19
+
+#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr1043nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr1043nd_flash_data = {
+ .part_probes = tl_wr1043nd_part_probes,
+};
+
+static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR1043ND_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR1043ND_GPIO_LED_QSS,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1043ND_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void tl_wr1043nd_rtl8366rb_hw_reset(bool active)
+{
+ if (active)
+ ath79_device_reset_set(AR71XX_RESET_GE0_PHY);
+ else
+ ath79_device_reset_clear(AR71XX_RESET_GE0_PHY);
+}
+
+static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
+ .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA,
+ .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK,
+ .hw_reset = tl_wr1043nd_rtl8366rb_hw_reset,
+};
+
+static struct platform_device tl_wr1043nd_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tl_wr1043nd_rtl8366rb_data,
+ }
+};
+
+static void __init tl_wr1043nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ tl_wr1043nd_rtl8366rb_hw_reset(true);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x1a000000;
+
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(&tl_wr1043nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
+ tl_wr1043nd_leds_gpio);
+
+ platform_device_register(&tl_wr1043nd_rtl8366rb_device);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043nd_gpio_keys),
+ tl_wr1043nd_gpio_keys);
+
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
+ tl_wr1043nd_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr2543n.c
new file mode 100644
index 0000000..8f6db5e
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr2543n.c
@@ -0,0 +1,156 @@
+/*
+ * TP-LINK TL-WR2543N/ND board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtl8367.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TL_WR2543N_GPIO_LED_WPS 0
+#define TL_WR2543N_GPIO_LED_USB 8
+
+/* The WLAN LEDs use GPIOs on the discrete AR9380 wmac */
+#define TL_WR2543N_GPIO_WMAC_LED_WLAN2G 0
+#define TL_WR2543N_GPIO_WMAC_LED_WLAN5G 1
+
+#define TL_WR2543N_GPIO_BTN_RESET 11
+#define TL_WR2543N_GPIO_BTN_WPS 12
+
+#define TL_WR2543N_GPIO_RTL8367_SDA 1
+#define TL_WR2543N_GPIO_RTL8367_SCK 6
+
+#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr2543n_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr2543n_flash_data = {
+ .part_probes = tl_wr2543n_part_probes,
+};
+
+static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR2543N_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR2543N_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led tl_wr2543n_wmac_leds_gpio[] = {
+ {
+ .name = "tp-link:green:wlan5g",
+ .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN5G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR2543N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR2543N_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
+ .mode = RTL8367_EXTIF_MODE_RGMII,
+ .txdelay = 1,
+ .rxdelay = 0,
+ .ability = {
+ .force_mode = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ .link = 1,
+ .duplex = 1,
+ .speed = RTL8367_PORT_SPEED_1000,
+ },
+};
+
+static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
+ .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA,
+ .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK,
+ .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg,
+};
+
+static struct platform_device tl_wr2543n_rtl8367_device = {
+ .name = RTL8367_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tl_wr2543n_rtl8367_data,
+ }
+};
+
+static void __init tl_wr2543n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr2543n_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
+ tl_wr2543n_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr2543n_gpio_keys),
+ tl_wr2543n_gpio_keys);
+ ath79_register_usb();
+
+ /*
+ * The ath9k driver uses this pin for its default led device, which is
+ * named ath9k-phy0, and reflects activity on either the 2 GHz or 5 GHz
+ * bands. This pin is connected to the WR2543's 2GHz WLAN LED.
+ */
+ ap9x_pci_setup_wmac_led_pin(0, TL_WR2543N_GPIO_WMAC_LED_WLAN2G);
+
+ /*
+ * We also have the driver set up an led device for the WR2543's
+ * separate 5 GHz WLAN LED in case the user wants it.
+ */
+ ap9x_pci_setup_wmac_leds(0, tl_wr2543n_wmac_leds_gpio,
+ ARRAY_SIZE(tl_wr2543n_wmac_leds_gpio));
+ ap91_pci_init(eeprom, mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+ ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x1a000000;
+
+ ath79_register_eth(0);
+
+ platform_device_register(&tl_wr2543n_rtl8367_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
+ tl_wr2543n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr703n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr703n.c
new file mode 100644
index 0000000..1d8d01c
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr703n.c
@@ -0,0 +1,118 @@
+/*
+ * TP-LINK TL-WR703N/TL-MR10U board support
+ *
+ * Copyright (C) 2011 dongyuqi <***@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR703N_GPIO_LED_SYSTEM 27
+#define TL_WR703N_GPIO_BTN_RESET 11
+
+#define TL_WR703N_GPIO_USB_POWER 8
+
+#define TL_MR10U_GPIO_USB_POWER 18
+
+#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr703n_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr703n_flash_data = {
+ .part_probes = tl_wr703n_part_probes,
+};
+
+static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:system",
+ .gpio = TL_WR703N_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR703N_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init common_setup(unsigned usb_power_gpio, bool sec_ethernet)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_m25p80(&tl_wr703n_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
+ tl_wr703n_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr703n_gpio_keys),
+ tl_wr703n_gpio_keys);
+
+ gpio_request_one(usb_power_gpio,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ if (sec_ethernet)
+ {
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+ ath79_register_eth(1);
+ }
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_mr10u_setup(void)
+{
+ common_setup(TL_MR10U_GPIO_USB_POWER, false);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR10U, "TL-MR10U", "TP-LINK TL-MR10U",
+ tl_mr10u_setup);
+
+static void __init tl_wr703n_setup(void)
+{
+ common_setup(TL_WR703N_GPIO_USB_POWER, false);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
+ tl_wr703n_setup);
+
+static void __init tl_wr710n_setup(void)
+{
+ common_setup(TL_WR703N_GPIO_USB_POWER, true);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR710N, "TL-WR710N", "TP-LINK TL-WR710N v1",
+ tl_wr710n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr720n-v3.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr720n-v3.c
new file mode 100644
index 0000000..80e8df6
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr720n-v3.c
@@ -0,0 +1,109 @@
+/*
+ * TP-LINK TL-WR720N board support
+ *
+ * Copyright (C) 2011 dongyuqi <***@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2013 yousong <***@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR720N_GPIO_LED_SYSTEM 27
+#define TL_WR720N_GPIO_BTN_RESET 11
+#define TL_WR720N_GPIO_BTN_SW1 18
+#define TL_WR720N_GPIO_BTN_SW2 20
+
+#define TL_WR720N_GPIO_USB_POWER 8
+
+#define TL_WR720N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR720N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR720N_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr720n_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr720n_flash_data = {
+ .part_probes = tl_wr720n_part_probes,
+};
+
+static struct gpio_led tl_wr720n_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:system",
+ .gpio = TL_WR720N_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr720n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR720N_GPIO_BTN_RESET,
+ .active_low = 0,
+ }, {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR720N_GPIO_BTN_SW1,
+ .active_low = 0,
+ }, {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR720N_GPIO_BTN_SW2,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_wr720n_v3_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_m25p80(&tl_wr720n_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr720n_leds_gpio),
+ tl_wr720n_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR720N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr720n_gpio_keys),
+ tl_wr720n_gpio_keys);
+
+ gpio_request_one(TL_WR720N_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR720N_V3, "TL-WR720N-v3", "TP-LINK TL-WR720N v3",
+ tl_wr720n_v3_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd-v4.c
new file mode 100644
index 0000000..851b762
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd-v4.c
@@ -0,0 +1,187 @@
+/*
+ * TP-LINK TL-WR741ND v4/TL-MR3220 v2 board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR741NDV4_GPIO_BTN_RESET 11
+#define TL_WR741NDV4_GPIO_BTN_WPS 26
+
+#define TL_WR741NDV4_GPIO_LED_WLAN 0
+#define TL_WR741NDV4_GPIO_LED_QSS 1
+#define TL_WR741NDV4_GPIO_LED_WAN 13
+#define TL_WR741NDV4_GPIO_LED_LAN1 14
+#define TL_WR741NDV4_GPIO_LED_LAN2 15
+#define TL_WR741NDV4_GPIO_LED_LAN3 16
+#define TL_WR741NDV4_GPIO_LED_LAN4 17
+#define TL_WR741NDV4_GPIO_LED_SYSTEM 27
+
+#define TL_MR3220V2_GPIO_BTN_WPS 11
+#define TL_MR3220V2_GPIO_BTN_WIFI 24
+
+#define TL_MR3220V2_GPIO_LED_3G 26
+#define TL_MR3220V2_GPIO_USB_POWER 8
+
+#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr741ndv4_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr741ndv4_flash_data = {
+ .part_probes = tl_wr741ndv4_part_probes,
+};
+
+static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN1,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN2,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN3,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR741NDV4_GPIO_LED_QSS,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR741NDV4_GPIO_LED_WAN,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR741NDV4_GPIO_LED_WLAN,
+ .active_low = 0,
+ }, {
+ /* the 3G LED is only present on the MR3220 v2 */
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3220V2_GPIO_LED_3G,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741NDV4_GPIO_BTN_RESET,
+ .active_low = 0,
+ }, {
+ .desc = "WPS",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741NDV4_GPIO_BTN_WPS,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button tl_mr3220v2_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3220V2_GPIO_BTN_WPS,
+ .active_low = 0,
+ }, {
+ .desc = "WIFI button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3220V2_GPIO_BTN_WIFI,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_ap121_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_setup_ar933x_phy4_switch(true, true);
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(&tl_wr741ndv4_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_wr741ndv4_setup(void)
+{
+ tl_ap121_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio) - 1,
+ tl_wr741ndv4_leds_gpio);
+ ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
+ tl_wr741ndv4_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
+ "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
+
+static void __init tl_mr3220v2_setup(void)
+{
+ tl_ap121_setup();
+
+ gpio_request_one(TL_MR3220V2_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
+ tl_wr741ndv4_leds_gpio);
+ ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3220v2_gpio_keys),
+ tl_mr3220v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3220_V2, "TL-MR3220-v2",
+ "TP-LINK TL-MR3220 v2", tl_mr3220v2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd.c
new file mode 100644
index 0000000..5931654
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr741nd.c
@@ -0,0 +1,130 @@
+/*
+ * TP-LINK TL-WR741ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define TL_WR741ND_GPIO_LED_QSS 0
+#define TL_WR741ND_GPIO_LED_SYSTEM 1
+#define TL_WR741ND_GPIO_LED_LAN1 13
+#define TL_WR741ND_GPIO_LED_LAN2 14
+#define TL_WR741ND_GPIO_LED_LAN3 15
+#define TL_WR741ND_GPIO_LED_LAN4 16
+#define TL_WR741ND_GPIO_LED_WAN 17
+
+#define TL_WR741ND_GPIO_BTN_RESET 11
+#define TL_WR741ND_GPIO_BTN_QSS 12
+
+#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr741nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr741nd_flash_data = {
+ .part_probes = tl_wr741nd_part_probes,
+};
+
+static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR741ND_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR741ND_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR741ND_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR741ND_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR741ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR741ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR741ND_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr741nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr741nd_flash_data);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
+ tl_wr741nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr741nd_gpio_keys),
+ tl_wr741nd_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap91_pci_init(ee, mac);
+}
+MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
+ tl_wr741nd_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v8.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v8.c
new file mode 100644
index 0000000..0099b15
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v8.c
@@ -0,0 +1,225 @@
+/*
+ * TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR841NV8_GPIO_LED_WLAN 13
+#define TL_WR841NV8_GPIO_LED_QSS 15
+#define TL_WR841NV8_GPIO_LED_WAN 18
+#define TL_WR841NV8_GPIO_LED_LAN1 19
+#define TL_WR841NV8_GPIO_LED_LAN2 20
+#define TL_WR841NV8_GPIO_LED_LAN3 21
+#define TL_WR841NV8_GPIO_LED_LAN4 12
+#define TL_WR841NV8_GPIO_LED_SYSTEM 14
+
+#define TL_WR841NV8_GPIO_BTN_RESET 17
+#define TL_WR841NV8_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */
+
+#define TL_MR3420V2_GPIO_LED_3G 11
+#define TL_MR3420V2_GPIO_USB_POWER 4
+
+#define TL_WR841NV8_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr841n_v8_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr841n_v8_flash_data = {
+ .part_probes = tl_wr841n_v8_part_probes,
+};
+
+static struct gpio_led tl_wr841n_v8_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR841NV8_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR841NV8_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR841NV8_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR841NV8_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR841NV8_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ /* the 3G LED is only present on the MR3420 v2 */
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3420V2_GPIO_LED_3G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr841n_v8_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV8_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL switch",
+ .type = EV_SW,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV8_GPIO_SW_RFKILL,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button tl_mr3420v2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV8_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV8_GPIO_SW_RFKILL,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_ap123_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* Disable JTAG, enabling GPIOs 0-3 */
+ /* Configure OBS4 line, for GPIO 4*/
+ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+ AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ /* config gpio4 as normal gpio function */
+ ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,
+ AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_m25p80(&tl_wr841n_v8_flash_data);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ /* GMAC0 is connected to the PHY0 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_wr841n_v8_setup(void)
+{
+ tl_ap123_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio) - 1,
+ tl_wr841n_v8_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
+ tl_wr841n_v8_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8",
+ tl_wr841n_v8_setup);
+
+
+static void __init tl_wr842n_v2_setup(void)
+{
+ tl_ap123_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
+ tl_wr841n_v8_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
+ tl_wr841n_v8_gpio_keys);
+
+ gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR842N_V2, "TL-WR842N-v2", "TP-LINK TL-WR842N/ND v2",
+ tl_wr842n_v2_setup);
+
+static void __init tl_mr3420v2_setup(void)
+{
+ tl_ap123_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
+ tl_wr841n_v8_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3420v2_gpio_keys),
+ tl_mr3420v2_gpio_keys);
+
+ /* enable power for the USB port */
+ gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3420_V2, "TL-MR3420-v2", "TP-LINK TL-MR3420 v2",
+ tl_mr3420v2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v9.c
new file mode 100644
index 0000000..c28afc6
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n-v9.c
@@ -0,0 +1,138 @@
+/*
+ * TP-LINK TL-WR841N/ND v9
+ *
+ * Copyright (C) 2014 Matthias Schiffer <***@universe-factory.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR841NV9_GPIO_LED_WLAN 13
+#define TL_WR841NV9_GPIO_LED_QSS 3
+#define TL_WR841NV9_GPIO_LED_WAN 4
+#define TL_WR841NV9_GPIO_LED_LAN1 16
+#define TL_WR841NV9_GPIO_LED_LAN2 15
+#define TL_WR841NV9_GPIO_LED_LAN3 14
+#define TL_WR841NV9_GPIO_LED_LAN4 11
+
+#define TL_WR841NV9_GPIO_BTN_RESET 12
+#define TL_WR841NV9_GPIO_BTN_WIFI 17
+
+#define TL_WR841NV9_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV9_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr841n_v9_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr841n_v9_flash_data = {
+ .part_probes = tl_wr841n_v9_part_probes,
+};
+
+static struct gpio_led tl_wr841n_v9_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR841NV9_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR841NV9_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR841NV9_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR841NV9_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR841NV9_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR841NV9_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR841NV9_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr841n_v9_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV9_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WIFI button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841NV9_GPIO_BTN_WIFI,
+ .active_low = 1,
+ }
+};
+
+
+static void __init tl_ap143_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&tl_wr841n_v9_flash_data);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ ath79_init_mac(tmpmac, mac, 0);
+ ath79_register_wmac(ee, tmpmac);
+}
+
+static void __init tl_wr841n_v9_setup(void)
+{
+ tl_ap143_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v9_leds_gpio),
+ tl_wr841n_v9_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v9_gpio_keys),
+ tl_wr841n_v9_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V9, "TL-WR841N-v9", "TP-LINK TL-WR841N/ND v9",
+ tl_wr841n_v9_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n.c
new file mode 100644
index 0000000..11f853f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr841n.c
@@ -0,0 +1,140 @@
+/*
+ * TP-LINK TL-WR841N/ND v1 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2
+#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4
+#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5
+
+#define TL_WR841ND_V1_GPIO_BTN_RESET 3
+#define TL_WR841ND_V1_GPIO_BTN_QSS 7
+
+#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition tl_wr841n_v1_partitions[] = {
+ {
+ .name = "redboot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x280000,
+ }, {
+ .name = "config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3c0000,
+ }
+};
+
+static struct flash_platform_data tl_wr841n_v1_flash_data = {
+ .parts = tl_wr841n_v1_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
+};
+
+static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:red:qss",
+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
+ }
+};
+
+static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "lan3",
+ .port_names[4] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wr841n_v1_dsa_chip,
+};
+
+static void __init tl_wr841n_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
+ &tl_wr841n_v1_dsa_data);
+
+ ath79_register_m25p80(&tl_wr841n_v1_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
+ tl_wr841n_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
+ tl_wr841n_v1_gpio_keys);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
+ tl_wr841n_v1_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr941nd.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr941nd.c
new file mode 100644
index 0000000..1ddeec7
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-tl-wr941nd.c
@@ -0,0 +1,121 @@
+/*
+ * TP-LINK TL-WR941ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR941ND_GPIO_LED_SYSTEM 2
+#define TL_WR941ND_GPIO_LED_QSS_RED 4
+#define TL_WR941ND_GPIO_LED_QSS_GREEN 5
+#define TL_WR941ND_GPIO_LED_WLAN 9
+
+#define TL_WR941ND_GPIO_BTN_RESET 3
+#define TL_WR941ND_GPIO_BTN_QSS 7
+
+#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr941nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr941nd_flash_data = {
+ .part_probes = tl_wr941nd_part_probes,
+};
+
+static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:red:qss",
+ .gpio = TL_WR941ND_GPIO_LED_QSS_RED,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR941ND_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wr941nd_dsa_chip = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "lan3",
+ .port_names[4] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data tl_wr941nd_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wr941nd_dsa_chip,
+};
+
+static void __init tl_wr941nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
+ &tl_wr941nd_dsa_data);
+
+ ath79_register_m25p80(&tl_wr941nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
+ tl_wr941nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr941nd_gpio_keys),
+ tl_wr941nd_gpio_keys);
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
+ tl_wr941nd_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ubnt.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ubnt.c
new file mode 100644
index 0000000..e49ac23
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-ubnt.c
@@ -0,0 +1,205 @@
+/*
+ * Ubiquiti RouterStation support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ * Copyright (C) 2008 Ubiquiti <***@ubnt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define UBNT_RS_GPIO_LED_RF 2
+#define UBNT_RS_GPIO_SW4 8
+
+#define UBNT_LS_SR71_GPIO_LED_D25 0
+#define UBNT_LS_SR71_GPIO_LED_D26 1
+#define UBNT_LS_SR71_GPIO_LED_D24 2
+#define UBNT_LS_SR71_GPIO_LED_D23 4
+#define UBNT_LS_SR71_GPIO_LED_D22 5
+#define UBNT_LS_SR71_GPIO_LED_D27 6
+#define UBNT_LS_SR71_GPIO_LED_D28 7
+
+#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */
+#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:rf",
+ .gpio = UBNT_RS_GPIO_LED_RF,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:d22",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D22,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d23",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D23,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d24",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D24,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:red:d25",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D25,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:red:d26",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D26,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d27",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D27,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d28",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D28,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = UBNT_RS_GPIO_SW4,
+ .active_low = 1,
+ }
+};
+
+static const char *ubnt_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data ubnt_flash_data = {
+ .part_probes = ubnt_part_probes,
+};
+
+static void __init ubnt_generic_setup(void)
+{
+ ath79_register_m25p80(&ubnt_flash_data);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_gpio_keys),
+ ubnt_gpio_keys);
+ ath79_register_pci();
+}
+
+#define UBNT_RS_WAN_PHYMASK BIT(20)
+#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
+
+static void __init ubnt_rs_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
+
+ /*
+ * There is Secondary MAC address duplicate problem with some
+ * UBNT HW batches. Do not increase Secondary MAC address by 1
+ * but do workaround with 'Locally Administrated' bit.
+ */
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+ ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
+ ubnt_rs_setup);
+
+#define UBNT_RSPRO_WAN_PHYMASK BIT(4)
+#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+static void __init ubnt_rspro_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
+ UBNT_RSPRO_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
+
+ /*
+ * There is Secondary MAC address duplicate problem with some
+ * UBNT HW batches. Do not increase Secondary MAC address by 1
+ * but do workaround with 'Locally Administrated' bit.
+ */
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+ ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
+ ubnt_rspro_setup);
+
+static void __init ubnt_lsx_setup(void)
+{
+ ubnt_generic_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
+
+#define UBNT_LSSR71_PHY_MASK BIT(1)
+
+static void __init ubnt_lssr71_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
+
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
+ ubnt_ls_sr71_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
+ ubnt_lssr71_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-whr-hp-g300n.c
new file mode 100644
index 0000000..48f49ad
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-whr-hp-g300n.c
@@ -0,0 +1,155 @@
+/*
+ * Buffalo WHR-HP-G300N board support
+ *
+ * based on ...
+ *
+ * TP-LINK TL-WR741ND board support
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WHRHPG300N_GPIO_LED_SECURITY 0
+#define WHRHPG300N_GPIO_LED_DIAG 1
+#define WHRHPG300N_GPIO_LED_ROUTER 6
+
+#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7
+#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8
+#define WHRHPG300N_GPIO_BTN_RESET 11
+#define WHRHPG300N_GPIO_BTN_AOSS 12
+#define WHRHPG300N_GPIO_LED_LAN1 13
+#define WHRHPG300N_GPIO_LED_LAN2 14
+#define WHRHPG300N_GPIO_LED_LAN3 15
+#define WHRHPG300N_GPIO_LED_LAN4 16
+#define WHRHPG300N_GPIO_LED_WAN 17
+
+#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
+
+#define WHRHPG300N_MAC_OFFSET 0x20c
+
+static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:orange:security",
+ .gpio = WHRHPG300N_GPIO_LED_SECURITY,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:diag",
+ .gpio = WHRHPG300N_GPIO_LED_DIAG,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:router",
+ .gpio = WHRHPG300N_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:wan",
+ .gpio = WHRHPG300N_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan1",
+ .gpio = WHRHPG300N_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan2",
+ .gpio = WHRHPG300N_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan3",
+ .gpio = WHRHPG300N_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan4",
+ .gpio = WHRHPG300N_GPIO_LED_LAN4,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WHRHPG300N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "aoss/wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .gpio = WHRHPG300N_GPIO_BTN_AOSS,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }
+};
+
+static void __init whrhpg300n_setup(void)
+{
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
+ whrhpg300n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(whrhpg300n_gpio_keys),
+ whrhpg300n_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
+ whrhpg300n_setup);
+
+MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
+ whrhpg300n_setup);
+
+MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
+ whrhpg300n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlae-ag300n.c
new file mode 100644
index 0000000..11006fd
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlae-ag300n.c
@@ -0,0 +1,114 @@
+/*
+ * Buffalo WLAE-AG300N board support
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WLAEAG300N_MAC_OFFSET 0x20c
+#define WLAEAG300N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
+ /*
+ * Note: Writing 1 into GPIO 13 will power down the device.
+ */
+ {
+ .name = "buffalo:green:wireless",
+ .gpio = 14,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:wireless",
+ .gpio = 15,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:status",
+ .gpio = 16,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:status",
+ .gpio = 17,
+ .active_low = 1,
+ }
+};
+
+
+static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
+ {
+ .desc = "function",
+ .type = EV_KEY,
+ .code = KEY_MODE,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 0,
+ .active_low = 1,
+ }, {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "power",
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 1,
+ }
+};
+
+static void __init wlaeag300n_setup(void)
+{
+ u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
+
+ ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
+ wlaeag300n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wlaeag300n_gpio_keys),
+ wlaeag300n_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ap91_pci_init(eeprom1, mac1);
+}
+
+MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
+ "Buffalo WLAE-AG300N", wlaeag300n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlr8100.c
new file mode 100644
index 0000000..88022e7
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wlr8100.c
@@ -0,0 +1,205 @@
+/*
+ * Sitecom X8 AC1750 WLR-8100 board support
+ *
+ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <***@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WLR8100_GPIO_LED_USB 4
+#define WLR8100_GPIO_LED_WLAN_5G 12
+#define WLR8100_GPIO_LED_WLAN_2G 13
+#define WLR8100_GPIO_LED_STATUS_RED 14
+#define WLR8100_GPIO_LED_WPS_RED 15
+#define WLR8100_GPIO_LED_STATUS_AMBER 19
+#define WLR8100_GPIO_LED_WPS_GREEN 20
+
+#define WLR8100_GPIO_BTN_WPS 16
+#define WLR8100_GPIO_BTN_RFKILL 21
+
+#define WLR8100_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WLR8100_KEYS_DEBOUNCE_INTERVAL (3 * WLR8100_KEYS_POLL_INTERVAL)
+
+#define WLR8100_MAC0_OFFSET 0
+#define WLR8100_MAC1_OFFSET 6
+#define WLR8100_WMAC_CALDATA_OFFSET 0x1000
+#define WLR8100_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led wlr8100_leds_gpio[] __initdata = {
+ {
+ .name = "wlr8100:amber:status",
+ .gpio = WLR8100_GPIO_LED_STATUS_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "wlr8100:red:status",
+ .gpio = WLR8100_GPIO_LED_STATUS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "wlr8100:green:wps",
+ .gpio = WLR8100_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "wlr8100:red:wps",
+ .gpio = WLR8100_GPIO_LED_WPS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "wlr8100:red:wlan-2g",
+ .gpio = WLR8100_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "wlr8100:red:usb",
+ .gpio = WLR8100_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wlr8100_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WLR8100_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WLR8100_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg wlr8100_ar8327_pad0_cfg;
+static struct ar8327_pad_cfg wlr8100_ar8327_pad6_cfg;
+
+static struct ar8327_platform_data wlr8100_ar8327_data = {
+ .pad0_cfg = &wlr8100_ar8327_pad0_cfg,
+ .pad6_cfg = &wlr8100_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info wlr8100_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wlr8100_ar8327_data,
+ },
+};
+
+static void __init wlr8100_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wlr8100_leds_gpio),
+ wlr8100_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WLR8100_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wlr8100_gpio_keys),
+ wlr8100_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + WLR8100_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + WLR8100_MAC0_OFFSET, 0);
+
+ mdiobus_register_board_info(wlr8100_mdio0_info,
+ ARRAY_SIZE(wlr8100_mdio0_info));
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected tot eh SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+}
+
+static void __init wlr8100_010_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
+ wlr8100_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
+ wlr8100_ar8327_pad0_cfg.txclk_delay_en = true;
+ wlr8100_ar8327_pad0_cfg.rxclk_delay_en = true;
+ wlr8100_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
+ wlr8100_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+
+ /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
+ wlr8100_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
+ wlr8100_ar8327_pad6_cfg.rxclk_delay_en = true;
+ wlr8100_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
+
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ wlr8100_common_setup();
+ ap91_pci_init(art + WLR8100_PCIE_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WLR8100, "WLR8100",
+ "Sitecom WLR-8100",
+ wlr8100_010_setup);
+
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndap360.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndap360.c
new file mode 100644
index 0000000..e70d88b
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndap360.c
@@ -0,0 +1,105 @@
+/*
+ * Netgear WNDAP360 board support (proper leds / button support missing)
+ *
+ * Based on AP96
+ * Copyright (C) 2013 Jacek Kikiewicz
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2010 Atheros Communications
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WNDAP360_GPIO_LED_POWER_ORANGE 0
+#define WNDAP360_GPIO_LED_POWER_GREEN 2
+
+/* Reset button - next to the power connector */
+#define WNDAP360_GPIO_BTN_RESET 8
+
+#define WNDAP360_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNDAP360_KEYS_DEBOUNCE_INTERVAL (3 * WNDAP360_KEYS_POLL_INTERVAL)
+
+#define WNDAP360_WMAC0_MAC_OFFSET 0x120c
+#define WNDAP360_WMAC1_MAC_OFFSET 0x520c
+#define WNDAP360_CALDATA0_OFFSET 0x1000
+#define WNDAP360_CALDATA1_OFFSET 0x5000
+
+/*
+ * WNDAP360 this still uses leds definitions from AP96
+ *
+ */
+static struct gpio_led wndap360_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNDAP360_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:orange:power",
+ .gpio = WNDAP360_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wndap360_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDAP360_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+#define WNDAP360_LAN_PHYMASK 0x0f
+
+static void __init wndap360_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
+
+ /* Reusing wifi MAC with offset of 1 as eth0 MAC */
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + WNDAP360_WMAC0_MAC_OFFSET, 1);
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
+ wndap360_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wndap360_gpio_keys),
+ wndap360_gpio_keys);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
+ art + WNDAP360_WMAC0_MAC_OFFSET,
+ art + WNDAP360_CALDATA1_OFFSET,
+ art + WNDAP360_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "Netgear WNDAP360", wndap360_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr3700.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr3700.c
new file mode 100644
index 0000000..1315bab
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr3700.c
@@ -0,0 +1,172 @@
+/*
+ * Netgear WNDR3700 board support
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WNDR3700_GPIO_LED_WPS_ORANGE 0
+#define WNDR3700_GPIO_LED_POWER_ORANGE 1
+#define WNDR3700_GPIO_LED_POWER_GREEN 2
+#define WNDR3700_GPIO_LED_WPS_GREEN 4
+#define WNDR3700_GPIO_LED_WAN_GREEN 6
+
+#define WNDR3700_GPIO_BTN_WPS 3
+#define WNDR3700_GPIO_BTN_RESET 8
+#define WNDR3700_GPIO_BTN_WIFI 11
+
+#define WNDR3700_GPIO_RTL8366_SDA 5
+#define WNDR3700_GPIO_RTL8366_SCK 7
+
+#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL)
+
+#define WNDR3700_ETH0_MAC_OFFSET 0
+#define WNDR3700_ETH1_MAC_OFFSET 0x6
+
+#define WNDR3700_WMAC0_MAC_OFFSET 0
+#define WNDR3700_WMAC1_MAC_OFFSET 0xc
+#define WNDR3700_CALDATA0_OFFSET 0x1000
+#define WNDR3700_CALDATA1_OFFSET 0x5000
+
+static struct gpio_led wndr3700_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNDR3700_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:orange:power",
+ .gpio = WNDR3700_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wps",
+ .gpio = WNDR3700_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:orange:wps",
+ .gpio = WNDR3700_GPIO_LED_WPS_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wan",
+ .gpio = WNDR3700_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "wifi",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_WIFI,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_platform_data wndr3700_rtl8366s_data = {
+ .gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
+ .gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wndr3700_rtl8366s_data,
+ }
+};
+
+static void __init wndr3700_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ /*
+ * The eth0 and wmac0 interfaces share the same MAC address which
+ * can lead to problems if operated unbridged. Set the locally
+ * administered bit on the eth0 MAC to make it unique.
+ */
+ ath79_init_local_mac(ath79_eth0_data.mac_addr,
+ art + WNDR3700_ETH0_MAC_OFFSET);
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+ ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + WNDR3700_ETH1_MAC_OFFSET, 0);
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+ ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
+ wndr3700_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wndr3700_gpio_keys),
+ wndr3700_gpio_keys);
+
+ platform_device_register(&wndr3700_rtl8366s_device);
+ platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */
+ ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6));
+
+ /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */
+ ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6));
+
+ ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
+ art + WNDR3700_WMAC0_MAC_OFFSET,
+ art + WNDR3700_CALDATA1_OFFSET,
+ art + WNDR3700_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700",
+ "NETGEAR WNDR3700/WNDR3800/WNDRMAC",
+ wndr3700_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr4300.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr4300.c
new file mode 100644
index 0000000..ae72ab6
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wndr4300.c
@@ -0,0 +1,208 @@
+/*
+ * NETGEAR WNDR3700v4/WNDR4300 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2014 Ralph Perlich <***@arcor.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/platform/ar934x_nfc.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+/* AR9344 GPIOs */
+#define WNDR4300_GPIO_LED_POWER_GREEN 0
+#define WNDR4300_GPIO_LED_POWER_AMBER 2
+#define WNDR4300_GPIO_LED_USB 13
+#define WNDR4300_GPIO_LED_WAN_GREEN 1
+#define WNDR4300_GPIO_LED_WAN_AMBER 3
+#define WNDR4300_GPIO_LED_WLAN2G 11
+#define WNDR4300_GPIO_LED_WLAN5G 14
+#define WNDR4300_GPIO_LED_WPS_GREEN 16
+#define WNDR4300_GPIO_LED_WPS_AMBER 17
+
+#define WNDR4300_GPIO_BTN_RESET 21
+#define WNDR4300_GPIO_BTN_WIRELESS 15
+#define WNDR4300_GPIO_BTN_WPS 12
+
+/* AR9580 GPIOs */
+#define WNDR4300_GPIO_USB_5V 0
+
+#define WNDR4300_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WNDR4300_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wndr4300_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNDR4300_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:amber:power",
+ .gpio = WNDR4300_GPIO_LED_POWER_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wan",
+ .gpio = WNDR4300_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:amber:wan",
+ .gpio = WNDR4300_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:usb",
+ .gpio = WNDR4300_GPIO_LED_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wps",
+ .gpio = WNDR4300_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:amber:wps",
+ .gpio = WNDR4300_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wlan2g",
+ .gpio = WNDR4300_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:blue:wlan5g",
+ .gpio = WNDR4300_GPIO_LED_WLAN5G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wndr4300_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4300_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4300_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Wireless button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4300_GPIO_BTN_WIRELESS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg wndr4300_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg wndr4300_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data wndr4300_ar8327_data = {
+ .pad0_cfg = &wndr4300_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wndr4300_ar8327_led_cfg,
+};
+
+static struct mdio_board_info wndr4300_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wndr4300_ar8327_data,
+ },
+};
+
+static void __init wndr4300_setup(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wndr4300_leds_gpio); i++)
+ ath79_gpio_output_select(wndr4300_leds_gpio[i].gpio,
+ AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio),
+ wndr4300_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wndr4300_gpio_keys),
+ wndr4300_gpio_keys);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(wndr4300_mdio0_info,
+ ARRAY_SIZE(wndr4300_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
+ ath79_register_nfc();
+ ath79_register_usb();
+
+ ath79_register_wmac_simple();
+
+ /* enable power for the USB port */
+ ap9x_pci_setup_wmac_gpio(0, BIT(WNDR4300_GPIO_USB_5V),
+ BIT(WNDR4300_GPIO_USB_5V));
+
+ ap91_pci_init_simple();
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDR4300, "WNDR4300", "NETGEAR WNDR3700v4/WNDR4300",
+ wndr4300_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000-v3.c
new file mode 100644
index 0000000..6acd991
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000-v3.c
@@ -0,0 +1,115 @@
+/*
+ * NETGEAR WNR2000v3 board support
+ *
+ * Copytight (C) 2013 Mathieu Olivari <***@gmail.com>
+ * Copyright (C) 2008-2009 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ * Copyright (C) 2008-2009 Andy Boyett <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WNR2000V3_GPIO_LED_WAN_GREEN 0
+#define WNR2000V3_GPIO_LED_LAN1_AMBER 1
+#define WNR2000V3_GPIO_LED_LAN4_AMBER 12
+#define WNR2000V3_GPIO_LED_PWR_GREEN 14
+#define WNR2000V3_GPIO_BTN_WPS 11
+
+#define WNR612V2_GPIO_LED_PWR_GREEN 11
+
+#define WNR2000V3_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNR2000V3_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V3_KEYS_POLL_INTERVAL)
+
+#define WNR2000V3_MAC0_OFFSET 0
+#define WNR2000V3_MAC1_OFFSET 6
+#define WNR2000V3_PCIE_CALDATA_OFFSET 0x1000
+
+static struct gpio_led wnr2000v3_leds_gpio[] __initdata = {
+ {
+ .name = "wnr2000v3:green:power",
+ .gpio = WNR2000V3_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "wnr2000v3:green:wan",
+ .gpio = WNR2000V3_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNR612V2_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wnr2000v3_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000V3_GPIO_BTN_WPS,
+ }
+};
+
+static void __init wnr_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V3_MAC0_OFFSET, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V3_MAC1_OFFSET, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+ ap91_pci_init(art + WNR2000V3_PCIE_CALDATA_OFFSET, NULL);
+}
+
+static void __init wnr2000v3_setup(void)
+{
+ wnr_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v3_leds_gpio),
+ wnr2000v3_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNR2000V3_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wnr2000v3_gpio_keys),
+ wnr2000v3_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNR2000_V3, "WNR2000V3", "NETGEAR WNR2000 V3", wnr2000v3_setup);
+
+static void __init wnr612v2_setup(void)
+{
+ wnr_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr612v2_leds_gpio),
+ wnr612v2_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNR612_V2, "WNR612V2", "NETGEAR WNR612 V2", wnr612v2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000.c
new file mode 100644
index 0000000..b4da7ec
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2000.c
@@ -0,0 +1,145 @@
+/*
+ * NETGEAR WNR2000 board support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ * Copyright (C) 2008-2009 Andy Boyett <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WNR2000_GPIO_LED_PWR_GREEN 14
+#define WNR2000_GPIO_LED_PWR_AMBER 7
+#define WNR2000_GPIO_LED_WPS 4
+#define WNR2000_GPIO_LED_WLAN 6
+#define WNR2000_GPIO_BTN_RESET 21
+#define WNR2000_GPIO_BTN_WPS 8
+
+#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wnr2000_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x240000,
+ }, {
+ .name = "user-config",
+ .offset = 0x290000,
+ .size = 0x010000,
+ }, {
+ .name = "uImage",
+ .offset = 0x2a0000,
+ .size = 0x120000,
+ }, {
+ .name = "language_table",
+ .offset = 0x3c0000,
+ .size = 0x020000,
+ }, {
+ .name = "rootfs_checksum",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data wnr2000_flash_data = {
+ .parts = wnr2000_partitions,
+ .nr_parts = ARRAY_SIZE(wnr2000_partitions),
+};
+
+static struct gpio_led wnr2000_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNR2000_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:power",
+ .gpio = WNR2000_GPIO_LED_PWR_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wps",
+ .gpio = WNR2000_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "netgear:blue:wlan",
+ .gpio = WNR2000_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000_GPIO_BTN_WPS,
+ }
+};
+
+static void __init wnr2000_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wnr2000_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
+ wnr2000_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wnr2000_gpio_keys),
+ wnr2000_gpio_keys);
+
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2200.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2200.c
new file mode 100644
index 0000000..bf7f9ee
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wnr2200.c
@@ -0,0 +1,137 @@
+/*
+ * NETGEAR WNR2200 board support
+ *
+ * Copyright (C) 2013 Aidan Kissane <aidankissane at googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WNR2200_GPIO_LED_LAN2_AMBER 0
+#define WNR2200_GPIO_LED_LAN4_AMBER 1
+#define WNR2200_GPIO_LED_WPS 5
+#define WNR2200_GPIO_LED_WAN_GREEN 7
+#define WNR2200_GPIO_LED_USB 8
+#define WNR2200_GPIO_LED_LAN3_AMBER 11
+#define WNR2200_GPIO_LED_WAN_AMBER 12
+#define WNR2200_GPIO_LED_LAN1_GREEN 13
+#define WNR2200_GPIO_LED_LAN2_GREEN 14
+#define WNR2200_GPIO_LED_LAN3_GREEN 15
+#define WNR2200_GPIO_LED_LAN4_GREEN 16
+#define WNR2200_GPIO_LED_PWR_AMBER 21
+#define WNR2200_GPIO_LED_PWR_GREEN 22
+
+#define WNR2200_GPIO_USB_POWER 24
+
+#define WNR2200_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNR2200_KEYS_DEBOUNCE_INTERVAL (3 * WNR2200_KEYS_POLL_INTERVAL)
+
+#define WNR2200_MAC0_OFFSET 0
+#define WNR2200_MAC1_OFFSET 6
+#define WNR2200_PCIE_CALDATA_OFFSET 0x1000
+
+static struct gpio_led wnr2200_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:amber:lan2",
+ .gpio = WNR2200_GPIO_LED_LAN2_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan4",
+ .gpio = WNR2200_GPIO_LED_LAN4_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wps",
+ .gpio = WNR2200_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wan",
+ .gpio = WNR2200_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:usb",
+ .gpio = WNR2200_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan3",
+ .gpio = WNR2200_GPIO_LED_LAN3_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:wan",
+ .gpio = WNR2200_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan1",
+ .gpio = WNR2200_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan2",
+ .gpio = WNR2200_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan3",
+ .gpio = WNR2200_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan4",
+ .gpio = WNR2200_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:power",
+ .gpio = WNR2200_GPIO_LED_PWR_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:power",
+ .gpio = WNR2200_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }
+};
+
+static void __init wnr2200_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2200_MAC0_OFFSET, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2200_MAC1_OFFSET, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+ ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
+ wnr2200_leds_gpio);
+
+ /* enable power for the USB port */
+ gpio_request_one(WNR2200_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_WNR2200, "WNR2200", "NETGEAR WNR2200", wnr2200_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wp543.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wp543.c
new file mode 100644
index 0000000..dc4aee0
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wp543.c
@@ -0,0 +1,109 @@
+/*
+ * Compex WP543/WPJ543 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WP543_GPIO_SW6 2
+#define WP543_GPIO_LED_1 3
+#define WP543_GPIO_LED_2 4
+#define WP543_GPIO_LED_WLAN 5
+#define WP543_GPIO_LED_CONN 6
+#define WP543_GPIO_LED_DIAG 7
+#define WP543_GPIO_SW4 8
+
+#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wp543_leds_gpio[] __initdata = {
+ {
+ .name = "wp543:green:led1",
+ .gpio = WP543_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:led2",
+ .gpio = WP543_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:wlan",
+ .gpio = WP543_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:conn",
+ .gpio = WP543_GPIO_LED_CONN,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:diag",
+ .gpio = WP543_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
+ {
+ .desc = "sw6",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WP543_GPIO_SW6,
+ .active_low = 1,
+ }, {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WP543_GPIO_SW4,
+ .active_low = 1,
+ }
+};
+
+static const char *wp543_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wp543_flash_data = {
+ .part_probes = wp543_part_probes,
+};
+
+static void __init wp543_setup(void)
+{
+ ath79_register_m25p80(&wp543_flash_data);
+
+ ath79_register_mdio(0, 0xfffffff0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x0f;
+ ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
+ AR71XX_RESET_GE0_PHY;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+ ath79_register_pci();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
+ wp543_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wp543_gpio_keys),
+ wp543_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wpe72.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wpe72.c
new file mode 100644
index 0000000..70bf7db
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wpe72.c
@@ -0,0 +1,97 @@
+/*
+ * Compex WPE72 board support
+ *
+ * Copyright (C) 2012 Johnathan Boyce<***@globalreach.eu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include<asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WPE72_GPIO_RESET 12
+#define WPE72_GPIO_LED_DIAG 13
+#define WPE72_GPIO_LED_1 14
+#define WPE72_GPIO_LED_2 15
+#define WPE72_GPIO_LED_3 16
+#define WPE72_GPIO_LED_4 17
+
+#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wpe72_leds_gpio[] __initdata = {
+ {
+ .name = "wpe72:green:led1",
+ .gpio = WPE72_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led2",
+ .gpio = WPE72_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led3",
+ .gpio = WPE72_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led4",
+ .gpio = WPE72_GPIO_LED_4,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:diag",
+ .gpio = WPE72_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPE72_GPIO_RESET,
+ .active_low = 1,
+ }
+};
+
+static const char *wpe72_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wpe72_flash_data = {
+ .part_probes = wpe72_part_probes,
+};
+
+static void __init wpe72_setup(void)
+{
+ ath79_register_m25p80(&wpe72_flash_data);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_pci();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
+ wpe72_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wpe72_gpio_keys),
+ wpe72_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt160nl.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt160nl.c
new file mode 100644
index 0000000..21aefe0
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt160nl.c
@@ -0,0 +1,126 @@
+/*
+ * Linksys WRT160NL board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "nvram.h"
+#include "machtypes.h"
+
+#define WRT160NL_GPIO_LED_POWER 14
+#define WRT160NL_GPIO_LED_WPS_AMBER 9
+#define WRT160NL_GPIO_LED_WPS_BLUE 8
+#define WRT160NL_GPIO_LED_WLAN 6
+
+#define WRT160NL_GPIO_BTN_WPS 7
+#define WRT160NL_GPIO_BTN_RESET 21
+
+#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL)
+
+#define WRT160NL_NVRAM_ADDR 0x1f7e0000
+#define WRT160NL_NVRAM_SIZE 0x10000
+
+static const char *wrt160nl_part_probes[] = {
+ "wrt160nl",
+ NULL,
+};
+
+static struct flash_platform_data wrt160nl_flash_data = {
+ .part_probes = wrt160nl_part_probes,
+};
+
+static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
+ {
+ .name = "wrt160nl:blue:power",
+ .gpio = WRT160NL_GPIO_LED_POWER,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ }, {
+ .name = "wrt160nl:amber:wps",
+ .gpio = WRT160NL_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wrt160nl:blue:wps",
+ .gpio = WRT160NL_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "wrt160nl:blue:wlan",
+ .gpio = WRT160NL_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WRT160NL_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WRT160NL_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init wrt160nl_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+
+ if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+ "lan_hwaddr=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ }
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = 0x01;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wrt160nl_flash_data);
+
+ ath79_register_usb();
+
+ if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+ "wl0_hwaddr=", mac) == 0)
+ ath79_register_wmac(eeprom, mac);
+ else
+ ath79_register_wmac(eeprom, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
+ wrt160nl_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wrt160nl_gpio_keys),
+ wrt160nl_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
+ wrt160nl_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt400n.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt400n.c
new file mode 100644
index 0000000..6c4c1cb
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wrt400n.c
@@ -0,0 +1,161 @@
+/*
+ * Linksys WRT400N board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2009 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WRT400N_GPIO_LED_POWER 1
+#define WRT400N_GPIO_LED_WPS_BLUE 4
+#define WRT400N_GPIO_LED_WPS_AMBER 5
+#define WRT400N_GPIO_LED_WLAN 6
+
+#define WRT400N_GPIO_BTN_RESET 8
+#define WRT400N_GPIO_BTN_WLSEC 3
+
+#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL)
+
+#define WRT400N_MAC_ADDR_OFFSET 0x120c
+#define WRT400N_CALDATA0_OFFSET 0x1000
+#define WRT400N_CALDATA1_OFFSET 0x5000
+
+static struct mtd_partition wrt400n_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "env",
+ .offset = 0x030000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "linux",
+ .offset = 0x040000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x180000,
+ .size = 0x630000,
+ }, {
+ .name = "nvram",
+ .offset = 0x7b0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "factory",
+ .offset = 0x7c0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "language",
+ .offset = 0x7d0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "caldata",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x770000,
+ }
+};
+
+static struct flash_platform_data wrt400n_flash_data = {
+ .parts = wrt400n_partitions,
+ .nr_parts = ARRAY_SIZE(wrt400n_partitions),
+};
+
+static struct gpio_led wrt400n_leds_gpio[] __initdata = {
+ {
+ .name = "wrt400n:blue:wps",
+ .gpio = WRT400N_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:amber:wps",
+ .gpio = WRT400N_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:blue:wlan",
+ .gpio = WRT400N_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:blue:power",
+ .gpio = WRT400N_GPIO_LED_POWER,
+ .active_low = 0,
+ .default_trigger = "default-on",
+ }
+};
+
+static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
+ .gpio = WRT400N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wlsec",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
+ .gpio = WRT400N_GPIO_BTN_WLSEC,
+ .active_low = 1,
+ }
+};
+
+static void __init wrt400n_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wrt400n_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
+ wrt400n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wrt400n_gpio_keys),
+ wrt400n_gpio_keys);
+
+ ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
+ art + WRT400N_CALDATA1_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-ag300h.c
new file mode 100644
index 0000000..edd48f2
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-ag300h.c
@@ -0,0 +1,205 @@
+/*
+ * Buffalo WZR-HP-AG300H board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPAG300H_MAC_OFFSET 0x20c
+#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpag300h_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f90000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1ff0000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data wzrhpag300h_flash_data = {
+ .parts = wzrhpag300h_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions),
+};
+
+static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 1,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = {
+ {
+ .name = "buffalo:amber:band2g",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:usb",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:band2g",
+ .gpio = 5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = {
+ {
+ .name = "buffalo:green:band5g",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:amber:band5g",
+ .gpio = 5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 3,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 5,
+ .active_low = 1,
+ }, {
+ .desc = "router_auto",
+ .type = EV_SW,
+ .code = BTN_6,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .desc = "router_off",
+ .type = EV_SW,
+ .code = BTN_5,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 1,
+ }, {
+ .desc = "movie_engine",
+ .type = EV_SW,
+ .code = BTN_7,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 1,
+ }
+};
+
+static void __init wzrhpag300h_setup(void)
+{
+ u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
+ u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
+ u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
+
+ ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
+ wzrhpag300h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpag300h_gpio_keys),
+ wzrhpag300h_gpio_keys);
+
+ ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
+
+ ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio,
+ ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio));
+ ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio,
+ ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio));
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
+ "Buffalo WZR-HP-AG300H/WZR-600DHP", wzrhpag300h_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh.c
new file mode 100644
index 0000000..0a3eba9
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh.c
@@ -0,0 +1,279 @@
+/*
+ * Buffalo WZR-HP-G300NH board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/nxp_74hc153.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WZRHPG300NH_GPIO_LED_USB 0
+#define WZRHPG300NH_GPIO_LED_DIAG 1
+#define WZRHPG300NH_GPIO_LED_WIRELESS 6
+#define WZRHPG300NH_GPIO_LED_SECURITY 17
+#define WZRHPG300NH_GPIO_LED_ROUTER 18
+
+#define WZRHPG300NH_GPIO_RTL8366_SDA 19
+#define WZRHPG300NH_GPIO_RTL8366_SCK 20
+
+#define WZRHPG300NH_GPIO_74HC153_S0 9
+#define WZRHPG300NH_GPIO_74HC153_S1 11
+#define WZRHPG300NH_GPIO_74HC153_1Y 12
+#define WZRHPG300NH_GPIO_74HC153_2Y 14
+
+#define WZRHPG300NH_GPIO_EXP_BASE 32
+#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0)
+#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2)
+#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3)
+#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
+#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7)
+
+#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL)
+
+#define WZRHPG300NH_MAC_OFFSET 0x20c
+
+static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f60000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1fc0000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x1fe0000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct physmap_flash_data wzrhpg300nh_flash_data = {
+ .width = 2,
+ .parts = wzrhpg300nh_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions),
+};
+
+#define WZRHPG300NH_FLASH_BASE 0x1e000000
+#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024)
+
+static struct resource wzrhpg300nh_flash_resources[] = {
+ [0] = {
+ .start = WZRHPG300NH_FLASH_BASE,
+ .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device wzrhpg300nh_flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = wzrhpg300nh_flash_resources,
+ .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources),
+ .dev = {
+ .platform_data = &wzrhpg300nh_flash_data,
+ }
+};
+
+static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:orange:security",
+ .gpio = WZRHPG300NH_GPIO_LED_SECURITY,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:wireless",
+ .gpio = WZRHPG300NH_GPIO_LED_WIRELESS,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:router",
+ .gpio = WZRHPG300NH_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:diag",
+ .gpio = WZRHPG300NH_GPIO_LED_DIAG,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:blue:usb",
+ .gpio = WZRHPG300NH_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_AOSS,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_USB,
+ .active_low = 1,
+ }, {
+ .desc = "qos_on",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON,
+ .active_low = 0,
+ }, {
+ .desc = "qos_off",
+ .type = EV_KEY,
+ .code = BTN_4,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF,
+ .active_low = 0,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON,
+ .active_low = 0,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
+ .active_low = 0,
+ }
+};
+
+static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
+ .gpio_base = WZRHPG300NH_GPIO_EXP_BASE,
+ .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0,
+ .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1,
+ .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y,
+ .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y,
+};
+
+static struct platform_device wzrhpg300nh_74hc153_device = {
+ .name = NXP_74HC153_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_74hc153_data,
+ }
+};
+
+static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = {
+ .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
+ .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wzrhpg300nh_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_rtl8366_data,
+ }
+};
+
+static struct platform_device wzrhpg300nh_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_rtl8366_data,
+ }
+};
+
+static void __init wzrhpg300nh_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
+ bool hasrtl8366rb = false;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB)
+ hasrtl8366rb = true;
+
+ if (hasrtl8366rb) {
+ ath79_eth0_pll_data.pll_1000 = 0x1f000000;
+ ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
+ ath79_eth1_pll_data.pll_1000 = 0x100;
+ ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
+ } else {
+ ath79_eth0_pll_data.pll_1000 = 0x1e000100;
+ ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ ath79_eth1_pll_data.pll_1000 = 0x1e000100;
+ ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ }
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_wmac(eeprom, NULL);
+
+ platform_device_register(&wzrhpg300nh_74hc153_device);
+ platform_device_register(&wzrhpg300nh_flash_device);
+
+ if (hasrtl8366rb)
+ platform_device_register(&wzrhpg300nh_rtl8366rb_device);
+ else
+ platform_device_register(&wzrhpg300nh_rtl8366s_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
+ wzrhpg300nh_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg300nh_gpio_keys),
+ wzrhpg300nh_gpio_keys);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
+ "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh2.c
new file mode 100644
index 0000000..733d996
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g300nh2.c
@@ -0,0 +1,170 @@
+/*
+ * Buffalo WZR-HP-G300NH2 board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <***@openwrt.org>
+ * Copyright (C) 2011 Mark Deneen <***@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPG300NH2_MAC_OFFSET 0x20c
+#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f90000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1ff0000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data wzrhpg300nh2_flash_data = {
+ .parts = wzrhpg300nh2_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
+};
+
+static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 16,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
+ {
+ .name = "buffalo:blue:usb",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:orange:security",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine_on",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine_off",
+ .gpio = 9,
+ .active_low = 1,
+ },
+};
+
+/* The AOSS button is wmac gpio 12 */
+static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 1,
+ }, {
+ .desc = "qos",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 0,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 0,
+ },
+};
+
+static void __init wzrhpg300nh2_setup(void)
+{
+
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
+ /* There is an eth1 but it is not connected to the switch */
+
+ ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+ ath79_register_mdio(0, ~(BIT(0)));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ /* gpio13 is usb power. Turn it on. */
+ gpio_request_one(13, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
+ wzrhpg300nh2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
+ wzrhpg300nh2_gpio_keys);
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
+ ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
+
+ ap91_pci_init(eeprom, mac0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
+ "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g450h.c
new file mode 100644
index 0000000..a559d73
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-wzr-hp-g450h.c
@@ -0,0 +1,165 @@
+/*
+ * Buffalo WZR-HP-G450G board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <***@openwrt.org>
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpg450h_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ }, {
+ .name = "ART",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f80000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1fe0000,
+ .size = 0x0020000,
+ }
+};
+
+static struct flash_platform_data wzrhpg450h_flash_data = {
+ .parts = wzrhpg450h_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
+};
+
+static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 14,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:orange:security",
+ .gpio = 13,
+ .active_low = 1,
+ },
+};
+
+
+static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
+ {
+ .name = "buffalo:blue:movie_engine",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 14,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 1,
+ }, {
+ .desc = "movie_engine",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 0,
+ }, {
+ .desc = "router_off",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 0,
+ }
+};
+
+
+static void __init wzrhpg450h_init(void)
+{
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *mac = (u8 *) ee + 2;
+
+ ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
+ wzrhpg450h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg450h_gpio_keys),
+ wzrhpg450h_gpio_keys);
+
+ ath79_register_eth(0);
+
+ gpio_request_one(16, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ap91_pci_init(ee, NULL);
+ ap9x_pci_get_wmac_data(0)->tx_gain_buffalo = true;
+ ap9x_pci_get_wmac_data(1)->tx_gain_buffalo = true;
+ ap9x_pci_setup_wmac_led_pin(0, 15);
+ ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
+ ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
+ wzrhpg450h_init);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-zcn-1523h.c
new file mode 100644
index 0000000..bc79ab9
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/mach-zcn-1523h.c
@@ -0,0 +1,154 @@
+/*
+ * Zcomax ZCN-1523H-2-8/5-16 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+
+#define ZCN_1523H_GPIO_BTN_RESET 0
+#define ZCN_1523H_GPIO_LED_INIT 11
+#define ZCN_1523H_GPIO_LED_LAN1 17
+
+#define ZCN_1523H_2_GPIO_LED_WEAK 13
+#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
+#define ZCN_1523H_2_GPIO_LED_STRONG 15
+
+#define ZCN_1523H_5_GPIO_LAN2_POWER 1
+#define ZCN_1523H_5_GPIO_LED_LAN2 13
+#define ZCN_1523H_5_GPIO_LED_WEAK 14
+#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
+#define ZCN_1523H_5_GPIO_LED_STRONG 16
+
+#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ZCN_1523H_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:amber:init",
+ .gpio = ZCN_1523H_GPIO_LED_INIT,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan1",
+ .gpio = ZCN_1523H_GPIO_LED_LAN1,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_2_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_2_GPIO_LED_STRONG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_5_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_5_GPIO_LED_STRONG,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan2",
+ .gpio = ZCN_1523H_5_GPIO_LED_LAN2,
+ .active_low = 1,
+ }
+};
+
+static void __init zcn_1523h_generic_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
+ zcn_1523h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(zcn_1523h_gpio_keys),
+ zcn_1523h_gpio_keys);
+
+ ap91_pci_init(ee, mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN1 port */
+ ath79_register_eth(0);
+}
+
+static void __init zcn_1523h_2_setup(void)
+{
+ zcn_1523h_generic_setup();
+ ap9x_pci_setup_wmac_gpio(0, BIT(9), 0);
+
+ ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
+ zcn_1523h_2_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
+ zcn_1523h_2_setup);
+
+static void __init zcn_1523h_5_setup(void)
+{
+ zcn_1523h_generic_setup();
+ ap9x_pci_setup_wmac_gpio(0, BIT(8), 0);
+
+ ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
+ zcn_1523h_5_leds_gpio);
+
+ /* LAN2 port */
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
+ zcn_1523h_5_setup);
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.c
new file mode 100644
index 0000000..e55af5a
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.c
@@ -0,0 +1,80 @@
+/*
+ * Atheros AR71xx minimal nvram support
+ *
+ * Copyright (C) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include "nvram.h"
+
+char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
+{
+ unsigned len = strlen(name);
+ char *cur, *last;
+
+ if (buf_len == 0 || len == 0)
+ return NULL;
+
+ if (buf_len < len)
+ return NULL;
+
+ if (len == 1)
+ return memchr(buf, (int) *name, buf_len);
+
+ last = (char *) buf + buf_len - len;
+ for (cur = (char *) buf; cur <= last; cur++)
+ if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
+ return cur + len;
+
+ return NULL;
+}
+
+int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+ const char *name, char *mac)
+{
+ char *buf;
+ char *mac_str;
+ int ret;
+ int t;
+
+ buf = vmalloc(nvram_len);
+ if (!buf)
+ return -ENOMEM;
+
+ memcpy(buf, nvram, nvram_len);
+ buf[nvram_len - 1] = '\0';
+
+ mac_str = ath79_nvram_find_var(name, buf, nvram_len);
+ if (!mac_str) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ if (strlen(mac_str) == 19 && mac_str[0] == '"' && mac_str[18] == '"') {
+ mac_str[18] = 0;
+ mac_str++;
+ }
+
+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
+
+ if (t != 6) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ ret = 0;
+
+free:
+ vfree(buf);
+ return ret;
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.h
new file mode 100644
index 0000000..75151d4
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/nvram.h
@@ -0,0 +1,19 @@
+/*
+ * Atheros AR71xx minimal nvram support
+ *
+ * Copyright (C) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_NVRAM_H
+#define _ATH79_NVRAM_H
+
+char *ath79_nvram_find_var(const char *name, const char *buf,
+ unsigned buf_len);
+int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+ const char *name, char *mac);
+
+#endif /* _ATH79_NVRAM_H */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.c
new file mode 100644
index 0000000..fcca1d2
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.c
@@ -0,0 +1,123 @@
+/*
+ * Atheros AP94 reference board PCI initialization
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+struct ath9k_fixup {
+ u16 *cal_data;
+ unsigned slot;
+};
+
+static int ath9k_num_fixups;
+static struct ath9k_fixup ath9k_fixups[2];
+
+static void ath9k_pci_fixup(struct pci_dev *dev)
+{
+ void __iomem *mem;
+ u16 *cal_data = NULL;
+ u16 cmd;
+ u32 bar0;
+ u32 val;
+ unsigned i;
+
+ for (i = 0; i < ath9k_num_fixups; i++) {
+ if (ath9k_fixups[i].cal_data == NULL)
+ continue;
+
+ if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
+ continue;
+
+ cal_data = ath9k_fixups[i].cal_data;
+ break;
+ }
+
+ if (cal_data == NULL)
+ return;
+
+ if (*cal_data != 0xa55a) {
+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
+ return;
+ }
+
+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
+
+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
+ if (!mem) {
+ pr_err("pci %s: ioremap error\n", pci_name(dev));
+ return;
+ }
+
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7161:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+ AR71XX_PCI_MEM_BASE);
+ break;
+ case ATH79_SOC_AR7240:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
+ break;
+
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR7242:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
+ break;
+
+ default:
+ BUG();
+ }
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ /* set pointer to first reg address */
+ cal_data += 3;
+ while (*cal_data != 0xffff) {
+ u32 reg;
+ reg = *cal_data++;
+ val = *cal_data++;
+ val |= (*cal_data++) << 16;
+
+ __raw_writel(val, mem + reg);
+ udelay(100);
+ }
+
+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
+ dev->vendor = val & 0xffff;
+ dev->device = (val >> 16) & 0xffff;
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
+ dev->revision = val & 0xff;
+ dev->class = val >> 8; /* upper 3 bytes */
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+
+ iounmap(mem);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+
+void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
+{
+ if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+ return;
+
+ ath9k_fixups[ath9k_num_fixups].slot = slot;
+ ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
+ ath9k_num_fixups++;
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.h
new file mode 100644
index 0000000..5794941
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/pci-ath9k-fixup.h
@@ -0,0 +1,6 @@
+#ifndef _PCI_ATH9K_FIXUP
+#define _PCI_ATH9K_FIXUP
+
+void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
+
+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.c b/target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.c
new file mode 100644
index 0000000..dbdec02
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.c
@@ -0,0 +1,249 @@
+/*
+ * RouterBoot helper routines
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "rb: " fmt
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/routerboot.h>
+#include <linux/rle.h>
+
+#include "routerboot.h"
+
+#define RB_BLOCK_SIZE 0x1000
+#define RB_ART_SIZE 0x10000
+
+static struct rb_info rb_info;
+
+static u32 get_u32(void *buf)
+{
+ u8 *p = buf;
+
+ return ((u32) p[3] + ((u32) p[2] << 8) + ((u32) p[1] << 16) +
+ ((u32) p[0] << 24));
+}
+
+static u16 get_u16(void *buf)
+{
+ u8 *p = buf;
+
+ return (u16) p[1] + ((u16) p[0] << 8);
+}
+
+__init int
+routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard)
+{
+ u32 magic_ref = hard ? RB_MAGIC_HARD : RB_MAGIC_SOFT;
+ u32 magic;
+ u32 cur = *offset;
+
+ while (cur < buflen) {
+ magic = get_u32(buf + cur);
+ if (magic == magic_ref) {
+ *offset = cur;
+ return 0;
+ }
+
+ cur += 0x1000;
+ }
+
+ return -ENOENT;
+}
+
+__init int
+routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
+ u8 **tag_data, u16 *tag_len)
+{
+ uint32_t magic;
+ int ret;
+
+ if (buflen < 4)
+ return -EINVAL;
+
+ magic = get_u32(buf);
+ switch (magic) {
+ case RB_MAGIC_HARD:
+ /* skip magic value */
+ buf += 4;
+ buflen -= 4;
+ break;
+
+ case RB_MAGIC_SOFT:
+ if (buflen < 8)
+ return -EINVAL;
+
+ /* skip magic and CRC value */
+ buf += 8;
+ buflen -= 8;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ ret = -ENOENT;
+ while (buflen > 2) {
+ u16 id;
+ u16 len;
+
+ len = get_u16(buf);
+ buf += 2;
+ buflen -= 2;
+
+ if (buflen < 2)
+ break;
+
+ id = get_u16(buf);
+ buf += 2;
+ buflen -= 2;
+
+ if (id == RB_ID_TERMINATOR)
+ break;
+
+ if (buflen < len)
+ break;
+
+ if (id == tag_id) {
+ if (tag_len)
+ *tag_len = len;
+ if (tag_data)
+ *tag_data = buf;
+ ret = 0;
+ break;
+ }
+
+ buf += len;
+ buflen -= len;
+ }
+
+ return ret;
+}
+
+static inline int
+rb_find_hard_cfg_tag(u16 tag_id, u8 **tag_data, u16 *tag_len)
+{
+ if (!rb_info.hard_cfg_data ||
+ !rb_info.hard_cfg_size)
+ return -ENOENT;
+
+ return routerboot_find_tag(rb_info.hard_cfg_data,
+ rb_info.hard_cfg_size,
+ tag_id, tag_data, tag_len);
+}
+
+__init const char *
+rb_get_board_name(void)
+{
+ u16 tag_len;
+ u8 *tag;
+ int err;
+
+ err = rb_find_hard_cfg_tag(RB_ID_BOARD_NAME, &tag, &tag_len);
+ if (err)
+ return NULL;
+
+ return tag;
+}
+
+__init u32
+rb_get_hw_options(void)
+{
+ u16 tag_len;
+ u8 *tag;
+ int err;
+
+ err = rb_find_hard_cfg_tag(RB_ID_HW_OPTIONS, &tag, &tag_len);
+ if (err)
+ return 0;
+
+ return get_u32(tag);
+}
+
+__init void *
+rb_get_wlan_data(void)
+{
+ u16 tag_len;
+ u8 *tag;
+ void *buf;
+ int err;
+
+ err = rb_find_hard_cfg_tag(RB_ID_WLAN_DATA, &tag, &tag_len);
+ if (err) {
+ pr_err("no calibration data found\n");
+ goto err;
+ }
+
+ buf = kmalloc(RB_ART_SIZE, GFP_KERNEL);
+ if (buf == NULL) {
+ pr_err("no memory for calibration data\n");
+ goto err;
+ }
+
+ err = rle_decode((char *) tag, tag_len, buf, RB_ART_SIZE,
+ NULL, NULL);
+ if (err) {
+ pr_err("unable to decode calibration data\n");
+ goto err_free;
+ }
+
+ return buf;
+
+err_free:
+ kfree(buf);
+err:
+ return NULL;
+}
+
+__init const struct rb_info *
+rb_init_info(void *data, unsigned int size)
+{
+ unsigned int offset;
+
+ if (size == 0 || (size % RB_BLOCK_SIZE) != 0)
+ return NULL;
+
+ for (offset = 0; offset < size; offset += RB_BLOCK_SIZE) {
+ u32 magic;
+
+ magic = get_u32(data + offset);
+ switch (magic) {
+ case RB_MAGIC_HARD:
+ rb_info.hard_cfg_offs = offset;
+ break;
+
+ case RB_MAGIC_SOFT:
+ rb_info.soft_cfg_offs = offset;
+ break;
+ }
+ }
+
+ if (!rb_info.hard_cfg_offs) {
+ pr_err("could not find a valid RouterBOOT hard config\n");
+ return NULL;
+ }
+
+ if (!rb_info.soft_cfg_offs) {
+ pr_err("could not find a valid RouterBOOT soft config\n");
+ return NULL;
+ }
+
+ rb_info.hard_cfg_size = RB_BLOCK_SIZE;
+ rb_info.hard_cfg_data = kmemdup(data + rb_info.hard_cfg_offs,
+ RB_BLOCK_SIZE, GFP_KERNEL);
+ if (!rb_info.hard_cfg_data)
+ return NULL;
+
+ rb_info.board_name = rb_get_board_name();
+ rb_info.hw_options = rb_get_hw_options();
+
+ return &rb_info;
+}
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.h b/target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.h
new file mode 100644
index 0000000..6ec296a
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/ath79/routerboot.h
@@ -0,0 +1,57 @@
+/*
+ * RouterBoot definitions
+ *
+ * Copyright (C) 2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_ROUTERBOOT_H_
+#define _ATH79_ROUTERBOOT_H_
+
+struct rb_info {
+ unsigned int hard_cfg_offs;
+ unsigned int hard_cfg_size;
+ void *hard_cfg_data;
+ unsigned int soft_cfg_offs;
+
+ const char *board_name;
+ u32 hw_options;
+};
+
+#ifdef CONFIG_ATH79_ROUTERBOOT
+const struct rb_info *rb_init_info(void *data, unsigned int size);
+void *rb_get_wlan_data(void);
+
+int routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
+ u8 **tag_data, u16 *tag_len);
+int routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard);
+#else
+static inline const struct rb_info *
+rb_init_info(void *data, unsigned int size)
+{
+ return NULL;
+}
+
+static inline void *rb_get_wlan_data(void)
+{
+ return NULL;
+}
+
+static inline int
+routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
+ u8 **tag_data, u16 *tag_len)
+{
+ return -ENOENT;
+}
+
+static inline int
+routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard)
+{
+ return -ENOENT;
+}
+#endif
+
+#endif /* _ATH79_ROUTERBOOT_H_ */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/include/asm/fw/myloader/myloader.h b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/fw/myloader/myloader.h
new file mode 100644
index 0000000..8a99d56
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/fw/myloader/myloader.h
@@ -0,0 +1,34 @@
+/*
+ * Compex's MyLoader specific definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_MIPS_FW_MYLOADER_H
+#define _ASM_MIPS_FW_MYLOADER_H
+
+#include <linux/myloader.h>
+
+struct myloader_info {
+ uint32_t vid;
+ uint32_t did;
+ uint32_t svid;
+ uint32_t sdid;
+ uint8_t macs[MYLO_ETHADDR_COUNT][6];
+};
+
+#ifdef CONFIG_MYLOADER
+extern struct myloader_info *myloader_get_info(void) __init;
+#else
+static inline struct myloader_info *myloader_get_info(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_MYLOADER */
+
+#endif /* _ASM_MIPS_FW_MYLOADER_H */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
new file mode 100644
index 0000000..d46dc4e
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
@@ -0,0 +1,65 @@
+/*
+ * Atheros AR71xx SoC specific platform data definitions
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_PLATFORM_H
+#define __ASM_MACH_ATH79_PLATFORM_H
+
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/spi/spi.h>
+
+struct ag71xx_switch_platform_data {
+ u8 phy4_mii_en:1;
+ u8 phy_poll_mask;
+};
+
+struct ag71xx_platform_data {
+ phy_interface_t phy_if_mode;
+ u32 phy_mask;
+ int speed;
+ int duplex;
+ u32 reset_bit;
+ u8 mac_addr[ETH_ALEN];
+ struct device *mii_bus_dev;
+
+ u8 has_gbit:1;
+ u8 is_ar91xx:1;
+ u8 is_ar7240:1;
+ u8 is_ar724x:1;
+ u8 has_ar8216:1;
+
+ struct ag71xx_switch_platform_data *switch_data;
+
+ void (*ddr_flush)(void);
+ void (*set_speed)(int speed);
+
+ u32 fifo_cfg1;
+ u32 fifo_cfg2;
+ u32 fifo_cfg3;
+
+ unsigned int max_frame_len;
+ unsigned int desc_pktlen_mask;
+};
+
+struct ag71xx_mdio_platform_data {
+ u32 phy_mask;
+ u8 builtin_switch:1;
+ u8 is_ar7240:1;
+ u8 is_ar9330:1;
+ u8 is_ar934x:1;
+ unsigned long mdio_clock;
+ unsigned long ref_clock;
+
+ void (*reset)(struct mii_bus *bus);
+};
+
+#endif /* __ASM_MACH_ATH79_PLATFORM_H */
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/mach-rb750.h
new file mode 100644
index 0000000..50d5a20
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/mach-rb750.h
@@ -0,0 +1,84 @@
+/*
+ * MikroTik RouterBOARD 750 definitions
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#ifndef _MACH_RB750_H
+#define _MACH_RB750_H
+
+#include <linux/bitops.h>
+
+#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */
+#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */
+#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */
+#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */
+#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */
+#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */
+#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */
+#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */
+#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */
+#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */
+#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */
+#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */
+#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */
+#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */
+#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */
+
+#define RB750_GPIO_BTN_RESET 1
+#define RB750_GPIO_SPI_CS0 2
+#define RB750_GPIO_LED_ACT 12
+#define RB750_GPIO_LED_PORT1 13
+#define RB750_GPIO_LED_PORT2 14
+#define RB750_GPIO_LED_PORT3 15
+#define RB750_GPIO_LED_PORT4 16
+#define RB750_GPIO_LED_PORT5 17
+
+#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT)
+#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1)
+#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2)
+#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3)
+#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4)
+#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5)
+#define RB750_NAND_NCE BIT(RB750_GPIO_NAND_NCE)
+
+#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE)
+
+#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
+ RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
+
+#define RB7XX_GPIO_NAND_NCE 0
+#define RB7XX_GPIO_MON 9
+#define RB7XX_GPIO_LED_ACT 11
+#define RB7XX_GPIO_USB_POWERON 13
+
+#define RB7XX_NAND_NCE BIT(RB7XX_GPIO_NAND_NCE)
+#define RB7XX_LED_ACT BIT(RB7XX_GPIO_LED_ACT)
+#define RB7XX_MONITOR BIT(RB7XX_GPIO_MON)
+#define RB7XX_USB_POWERON BIT(RB7XX_GPIO_USB_POWERON)
+
+struct rb750_led_data {
+ char *name;
+ char *default_trigger;
+ u32 mask;
+ int active_low;
+};
+
+struct rb750_led_platform_data {
+ int num_leds;
+ struct rb750_led_data *leds;
+ void (*latch_change)(u32 clear, u32 set);
+};
+
+struct rb7xx_nand_platform_data {
+ u32 nce_line;
+
+ void (*enable_pins)(void);
+ void (*disable_pins)(void);
+ void (*latch_change)(u32, u32);
+};
+
+#endif /* _MACH_RB750_H */
\ No newline at end of file
diff --git a/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
new file mode 100644
index 0000000..5b17e94
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
@@ -0,0 +1,48 @@
+/*
+ * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define CPLD_GPIO_nLED1 0
+#define CPLD_GPIO_nLED2 1
+#define CPLD_GPIO_nLED3 2
+#define CPLD_GPIO_nLED4 3
+#define CPLD_GPIO_FAN 4
+#define CPLD_GPIO_ALE 5
+#define CPLD_GPIO_CLE 6
+#define CPLD_GPIO_nCE 7
+#define CPLD_GPIO_nLED5 8
+
+#define CPLD_NUM_GPIOS 9
+
+#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1)
+#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2)
+#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3)
+#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4)
+#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN)
+#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE)
+#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE)
+#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE)
+#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5)
+
+struct rb4xx_cpld_platform_data {
+ unsigned gpio_base;
+};
+
+extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
+extern int rb4xx_cpld_read(unsigned char *rx_buf,
+ const unsigned char *verify_buf,
+ unsigned cnt);
+extern int rb4xx_cpld_read_from(unsigned addr,
+ unsigned char *rx_buf,
+ const unsigned char *verify_buf,
+ unsigned cnt);
+extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);
diff --git a/target/linux/ar71xx/files-3.14/drivers/gpio/gpio-latch.c b/target/linux/ar71xx/files-3.14/drivers/gpio/gpio-latch.c
new file mode 100644
index 0000000..1efa1a1
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/gpio/gpio-latch.c
@@ -0,0 +1,219 @@
+/*
+ * GPIO latch driver
+ *
+ * Copyright (C) 2014 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <linux/platform_data/gpio-latch.h>
+
+struct gpio_latch_chip {
+ struct gpio_chip gc;
+
+ struct mutex mutex;
+ struct mutex latch_mutex;
+ bool latch_enabled;
+ int le_gpio;
+ bool le_active_low;
+ int *gpios;
+};
+
+static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc)
+{
+ return container_of(gc, struct gpio_latch_chip, gc);
+}
+
+static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable)
+{
+ mutex_lock(&glc->mutex);
+
+ if (enable)
+ glc->latch_enabled = true;
+
+ if (glc->latch_enabled)
+ mutex_lock(&glc->latch_mutex);
+}
+
+static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable)
+{
+ if (glc->latch_enabled)
+ mutex_unlock(&glc->latch_mutex);
+
+ if (disable)
+ glc->latch_enabled = true;
+
+ mutex_unlock(&glc->mutex);
+}
+
+static int
+gpio_latch_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+ int ret;
+
+ gpio_latch_lock(glc, false);
+ ret = gpio_get_value(glc->gpios[offset]);
+ gpio_latch_unlock(glc, false);
+
+ return ret;
+}
+
+static void
+gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+ bool enable_latch = false;
+ bool disable_latch = false;
+ int gpio;
+
+ gpio = glc->gpios[offset];
+
+ if (gpio == glc->le_gpio) {
+ enable_latch = value ^ glc->le_active_low;
+ disable_latch = !enable_latch;
+ }
+
+ gpio_latch_lock(glc, enable_latch);
+ gpio_set_value(gpio, value);
+ gpio_latch_unlock(glc, disable_latch);
+}
+
+static int
+gpio_latch_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+ int ret;
+
+ gpio_latch_lock(glc, false);
+ ret = gpio_direction_input(glc->gpios[offset]);
+ gpio_latch_unlock(glc, false);
+
+ return ret;
+}
+
+static int
+gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+ bool enable_latch = false;
+ bool disable_latch = false;
+ int gpio;
+ int ret;
+
+ gpio = glc->gpios[offset];
+
+ if (gpio == glc->le_gpio) {
+ enable_latch = value ^ glc->le_active_low;
+ disable_latch = !enable_latch;
+ }
+
+ gpio_latch_lock(glc, enable_latch);
+ ret = gpio_direction_output(gpio, value);
+ gpio_latch_unlock(glc, disable_latch);
+
+ return ret;
+}
+
+static int gpio_latch_probe(struct platform_device *pdev)
+{
+ struct gpio_latch_chip *glc;
+ struct gpio_latch_platform_data *pdata;
+ struct gpio_chip *gc;
+ int size;
+ int ret;
+ int i;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->le_gpio_index >= pdata->num_gpios ||
+ !pdata->num_gpios ||
+ !pdata->gpios)
+ return -EINVAL;
+
+ for (i = 0; i < pdata->num_gpios; i++) {
+ int gpio = pdata->gpios[i];
+
+ ret = devm_gpio_request(&pdev->dev, gpio,
+ GPIO_LATCH_DRIVER_NAME);
+ if (ret)
+ return ret;
+ }
+
+ glc = devm_kzalloc(&pdev->dev, sizeof(*glc), GFP_KERNEL);
+ if (!glc)
+ return -ENOMEM;
+
+ mutex_init(&glc->mutex);
+ mutex_init(&glc->latch_mutex);
+
+ size = pdata->num_gpios * sizeof(glc->gpios[0]);
+ glc->gpios = devm_kzalloc(&pdev->dev, size , GFP_KERNEL);
+ if (!glc->gpios)
+ return -ENOMEM;
+
+ memcpy(glc->gpios, pdata->gpios, size);
+
+ glc->le_gpio = glc->gpios[pdata->le_gpio_index];
+ glc->le_active_low = pdata->le_active_low;
+
+ gc = &glc->gc;
+
+ gc->label = GPIO_LATCH_DRIVER_NAME;
+ gc->base = pdata->base;
+ gc->can_sleep = true;
+ gc->ngpio = pdata->num_gpios;
+ gc->get = gpio_latch_get;
+ gc->set = gpio_latch_set;
+ gc->direction_input = gpio_latch_direction_input,
+ gc->direction_output = gpio_latch_direction_output;
+
+ platform_set_drvdata(pdev, glc);
+
+ ret = gpiochip_add(&glc->gc);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int gpio_latch_remove(struct platform_device *pdev)
+{
+ struct gpio_latch_chip *glc = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&glc->gc);;
+}
+
+
+static struct platform_driver gpio_latch_driver = {
+ .probe = gpio_latch_probe,
+ .remove = gpio_latch_remove,
+ .driver = {
+ .name = GPIO_LATCH_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_latch_init(void)
+{
+ return platform_driver_register(&gpio_latch_driver);
+}
+
+postcore_initcall(gpio_latch_init);
+
+MODULE_DESCRIPTION("GPIO latch driver");
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files-3.14/drivers/gpio/gpio-nxp-74hc153.c b/target/linux/ar71xx/files-3.14/drivers/gpio/gpio-nxp-74hc153.c
new file mode 100644
index 0000000..5bdeb3d
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/gpio/gpio-nxp-74hc153.c
@@ -0,0 +1,247 @@
+/*
+ * NXP 74HC153 - Dual 4-input multiplexer GPIO driver
+ *
+ * Copyright (C) 2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/nxp_74hc153.h>
+
+#define NXP_74HC153_NUM_GPIOS 8
+#define NXP_74HC153_S0_MASK 0x1
+#define NXP_74HC153_S1_MASK 0x2
+#define NXP_74HC153_BANK_MASK 0x4
+
+struct nxp_74hc153_chip {
+ struct device *parent;
+ struct gpio_chip gpio_chip;
+ struct mutex lock;
+};
+
+static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc)
+{
+ return container_of(gc, struct nxp_74hc153_chip, gpio_chip);
+}
+
+static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ return 0;
+}
+
+static int nxp_74hc153_direction_output(struct gpio_chip *gc,
+ unsigned offset, int val)
+{
+ return -EINVAL;
+}
+
+static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset)
+{
+ struct nxp_74hc153_chip *nxp;
+ struct nxp_74hc153_platform_data *pdata;
+ unsigned s0;
+ unsigned s1;
+ unsigned pin;
+ int ret;
+
+ nxp = gpio_to_nxp(gc);
+ pdata = nxp->parent->platform_data;
+
+ s0 = !!(offset & NXP_74HC153_S0_MASK);
+ s1 = !!(offset & NXP_74HC153_S1_MASK);
+ pin = (offset & NXP_74HC153_BANK_MASK) ? pdata->gpio_pin_2y
+ : pdata->gpio_pin_1y;
+
+ mutex_lock(&nxp->lock);
+ gpio_set_value(pdata->gpio_pin_s0, s0);
+ gpio_set_value(pdata->gpio_pin_s1, s1);
+ ret = gpio_get_value(pin);
+ mutex_unlock(&nxp->lock);
+
+ return ret;
+}
+
+static void nxp_74hc153_set_value(struct gpio_chip *gc,
+ unsigned offset, int val)
+{
+ /* not supported */
+}
+
+static int nxp_74hc153_probe(struct platform_device *pdev)
+{
+ struct nxp_74hc153_platform_data *pdata;
+ struct nxp_74hc153_chip *nxp;
+ struct gpio_chip *gc;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata == NULL) {
+ dev_dbg(&pdev->dev, "no platform data specified\n");
+ return -EINVAL;
+ }
+
+ nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL);
+ if (nxp == NULL) {
+ dev_err(&pdev->dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ err = gpio_request(pdata->gpio_pin_s0, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+ pdata->gpio_pin_s0, err);
+ goto err_free_nxp;
+ }
+
+ err = gpio_request(pdata->gpio_pin_s1, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+ pdata->gpio_pin_s1, err);
+ goto err_free_s0;
+ }
+
+ err = gpio_request(pdata->gpio_pin_1y, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+ pdata->gpio_pin_1y, err);
+ goto err_free_s1;
+ }
+
+ err = gpio_request(pdata->gpio_pin_2y, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+ pdata->gpio_pin_2y, err);
+ goto err_free_1y;
+ }
+
+ err = gpio_direction_output(pdata->gpio_pin_s0, 0);
+ if (err) {
+ dev_err(&pdev->dev,
+ "unable to set direction of gpio %u, err=%d\n",
+ pdata->gpio_pin_s0, err);
+ goto err_free_2y;
+ }
+
+ err = gpio_direction_output(pdata->gpio_pin_s1, 0);
+ if (err) {
+ dev_err(&pdev->dev,
+ "unable to set direction of gpio %u, err=%d\n",
+ pdata->gpio_pin_s1, err);
+ goto err_free_2y;
+ }
+
+ err = gpio_direction_input(pdata->gpio_pin_1y);
+ if (err) {
+ dev_err(&pdev->dev,
+ "unable to set direction of gpio %u, err=%d\n",
+ pdata->gpio_pin_1y, err);
+ goto err_free_2y;
+ }
+
+ err = gpio_direction_input(pdata->gpio_pin_2y);
+ if (err) {
+ dev_err(&pdev->dev,
+ "unable to set direction of gpio %u, err=%d\n",
+ pdata->gpio_pin_2y, err);
+ goto err_free_2y;
+ }
+
+ nxp->parent = &pdev->dev;
+ mutex_init(&nxp->lock);
+
+ gc = &nxp->gpio_chip;
+
+ gc->direction_input = nxp_74hc153_direction_input;
+ gc->direction_output = nxp_74hc153_direction_output;
+ gc->get = nxp_74hc153_get_value;
+ gc->set = nxp_74hc153_set_value;
+ gc->can_sleep = 1;
+
+ gc->base = pdata->gpio_base;
+ gc->ngpio = NXP_74HC153_NUM_GPIOS;
+ gc->label = dev_name(nxp->parent);
+ gc->dev = nxp->parent;
+ gc->owner = THIS_MODULE;
+
+ err = gpiochip_add(&nxp->gpio_chip);
+ if (err) {
+ dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
+ goto err_free_2y;
+ }
+
+ platform_set_drvdata(pdev, nxp);
+ return 0;
+
+err_free_2y:
+ gpio_free(pdata->gpio_pin_2y);
+err_free_1y:
+ gpio_free(pdata->gpio_pin_1y);
+err_free_s1:
+ gpio_free(pdata->gpio_pin_s1);
+err_free_s0:
+ gpio_free(pdata->gpio_pin_s0);
+err_free_nxp:
+ kfree(nxp);
+ return err;
+}
+
+static int nxp_74hc153_remove(struct platform_device *pdev)
+{
+ struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev);
+ struct nxp_74hc153_platform_data *pdata = pdev->dev.platform_data;
+
+ if (nxp) {
+ int err;
+
+ err = gpiochip_remove(&nxp->gpio_chip);
+ if (err) {
+ dev_err(&pdev->dev,
+ "unable to remove gpio chip, err=%d\n",
+ err);
+ return err;
+ }
+
+ gpio_free(pdata->gpio_pin_2y);
+ gpio_free(pdata->gpio_pin_1y);
+ gpio_free(pdata->gpio_pin_s1);
+ gpio_free(pdata->gpio_pin_s0);
+
+ kfree(nxp);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+static struct platform_driver nxp_74hc153_driver = {
+ .probe = nxp_74hc153_probe,
+ .remove = nxp_74hc153_remove,
+ .driver = {
+ .name = NXP_74HC153_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init nxp_74hc153_init(void)
+{
+ return platform_driver_register(&nxp_74hc153_driver);
+}
+subsys_initcall(nxp_74hc153_init);
+
+static void __exit nxp_74hc153_exit(void)
+{
+ platform_driver_unregister(&nxp_74hc153_driver);
+}
+module_exit(nxp_74hc153_exit);
+
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files-3.14/drivers/leds/leds-rb750.c b/target/linux/ar71xx/files-3.14/drivers/leds/leds-rb750.c
new file mode 100644
index 0000000..79e98b4
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/leds/leds-rb750.c
@@ -0,0 +1,144 @@
+/*
+ * LED driver for the RouterBOARD 750
+ *
+ * Copyright (C) 2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ath79/mach-rb750.h>
+
+#define DRV_NAME "leds-rb750"
+
+struct rb750_led_dev {
+ struct led_classdev cdev;
+ u32 mask;
+ int active_low;
+ void (*latch_change)(u32 clear, u32 set);
+};
+
+struct rb750_led_drvdata {
+ struct rb750_led_dev *led_devs;
+ int num_leds;
+};
+
+static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev)
+{
+ return (struct rb750_led_dev *)container_of(led_cdev,
+ struct rb750_led_dev, cdev);
+}
+
+static void rb750_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct rb750_led_dev *rbled = to_rbled(led_cdev);
+ int level;
+
+ level = (value == LED_OFF) ? 0 : 1;
+ level ^= rbled->active_low;
+
+ if (level)
+ rbled->latch_change(0, rbled->mask);
+ else
+ rbled->latch_change(rbled->mask, 0);
+}
+
+static int rb750_led_probe(struct platform_device *pdev)
+{
+ struct rb750_led_platform_data *pdata;
+ struct rb750_led_drvdata *drvdata;
+ int ret = 0;
+ int i;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ drvdata = kzalloc(sizeof(struct rb750_led_drvdata) +
+ sizeof(struct rb750_led_dev) * pdata->num_leds,
+ GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->num_leds = pdata->num_leds;
+ drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1];
+
+ for (i = 0; i < drvdata->num_leds; i++) {
+ struct rb750_led_dev *rbled = &drvdata->led_devs[i];
+ struct rb750_led_data *led_data = &pdata->leds[i];
+
+ rbled->cdev.name = led_data->name;
+ rbled->cdev.default_trigger = led_data->default_trigger;
+ rbled->cdev.brightness_set = rb750_led_brightness_set;
+ rbled->cdev.brightness = LED_OFF;
+
+ rbled->mask = led_data->mask;
+ rbled->active_low = !!led_data->active_low;
+ rbled->latch_change = pdata->latch_change;
+
+ ret = led_classdev_register(&pdev->dev, &rbled->cdev);
+ if (ret)
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+ kfree(drvdata);
+ return ret;
+}
+
+static int rb750_led_remove(struct platform_device *pdev)
+{
+ struct rb750_led_drvdata *drvdata;
+ int i;
+
+ drvdata = platform_get_drvdata(pdev);
+ for (i = 0; i < drvdata->num_leds; i++)
+ led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+ kfree(drvdata);
+ return 0;
+}
+
+static struct platform_driver rb750_led_driver = {
+ .probe = rb750_led_probe,
+ .remove = rb750_led_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_ALIAS("platform:leds-rb750");
+
+static int __init rb750_led_init(void)
+{
+ return platform_driver_register(&rb750_led_driver);
+}
+
+static void __exit rb750_led_exit(void)
+{
+ platform_driver_unregister(&rb750_led_driver);
+}
+
+module_init(rb750_led_init);
+module_exit(rb750_led_exit);
+
+MODULE_DESCRIPTION(DRV_NAME);
+MODULE_DESCRIPTION("LED driver for the RouterBOARD 750");
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files-3.14/drivers/leds/leds-wndr3700-usb.c b/target/linux/ar71xx/files-3.14/drivers/leds/leds-wndr3700-usb.c
new file mode 100644
index 0000000..6425b05
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/leds/leds-wndr3700-usb.c
@@ -0,0 +1,76 @@
+/*
+ * USB LED driver for the NETGEAR WNDR3700
+ *
+ * Copyright (C) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#define DRIVER_NAME "wndr3700-led-usb"
+
+static void wndr3700_usb_led_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ if (brightness)
+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
+ else
+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
+}
+
+static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev)
+{
+ return ath79_device_reset_get(AR71XX_RESET_GE1_PHY) ? LED_OFF : LED_FULL;
+}
+
+static struct led_classdev wndr3700_usb_led = {
+ .name = "netgear:green:usb",
+ .brightness_set = wndr3700_usb_led_set,
+ .brightness_get = wndr3700_usb_led_get,
+};
+
+static int wndr3700_usb_led_probe(struct platform_device *pdev)
+{
+ return led_classdev_register(&pdev->dev, &wndr3700_usb_led);
+}
+
+static int wndr3700_usb_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&wndr3700_usb_led);
+ return 0;
+}
+
+static struct platform_driver wndr3700_usb_led_driver = {
+ .probe = wndr3700_usb_led_probe,
+ .remove = wndr3700_usb_led_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wndr3700_usb_led_init(void)
+{
+ return platform_driver_register(&wndr3700_usb_led_driver);
+}
+
+static void __exit wndr3700_usb_led_exit(void)
+{
+ platform_driver_unregister(&wndr3700_usb_led_driver);
+}
+
+module_init(wndr3700_usb_led_init);
+module_exit(wndr3700_usb_led_exit);
+
+MODULE_DESCRIPTION("USB LED driver for the NETGEAR WNDR3700");
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/target/linux/ar71xx/files-3.14/drivers/mtd/nand/ar934x_nfc.c b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/ar934x_nfc.c
new file mode 100644
index 0000000..9231251
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/ar934x_nfc.c
@@ -0,0 +1,1504 @@
+/*
+ * Driver for the built-in NAND controller of the Atheros AR934x SoCs
+ *
+ * Copyright (C) 2011-2013 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include <linux/platform/ar934x_nfc.h>
+
+#define AR934X_NFC_REG_CMD 0x00
+#define AR934X_NFC_REG_CTRL 0x04
+#define AR934X_NFC_REG_STATUS 0x08
+#define AR934X_NFC_REG_INT_MASK 0x0c
+#define AR934X_NFC_REG_INT_STATUS 0x10
+#define AR934X_NFC_REG_ECC_CTRL 0x14
+#define AR934X_NFC_REG_ECC_OFFSET 0x18
+#define AR934X_NFC_REG_ADDR0_0 0x1c
+#define AR934X_NFC_REG_ADDR0_1 0x24
+#define AR934X_NFC_REG_ADDR1_0 0x20
+#define AR934X_NFC_REG_ADDR1_1 0x28
+#define AR934X_NFC_REG_SPARE_SIZE 0x30
+#define AR934X_NFC_REG_PROTECT 0x38
+#define AR934X_NFC_REG_LOOKUP_EN 0x40
+#define AR934X_NFC_REG_LOOKUP(_x) (0x44 + (_i) * 4)
+#define AR934X_NFC_REG_DMA_ADDR 0x64
+#define AR934X_NFC_REG_DMA_COUNT 0x68
+#define AR934X_NFC_REG_DMA_CTRL 0x6c
+#define AR934X_NFC_REG_MEM_CTRL 0x80
+#define AR934X_NFC_REG_DATA_SIZE 0x84
+#define AR934X_NFC_REG_READ_STATUS 0x88
+#define AR934X_NFC_REG_TIME_SEQ 0x8c
+#define AR934X_NFC_REG_TIMINGS_ASYN 0x90
+#define AR934X_NFC_REG_TIMINGS_SYN 0x94
+#define AR934X_NFC_REG_FIFO_DATA 0x98
+#define AR934X_NFC_REG_TIME_MODE 0x9c
+#define AR934X_NFC_REG_DMA_ADDR_OFFS 0xa0
+#define AR934X_NFC_REG_FIFO_INIT 0xb0
+#define AR934X_NFC_REG_GEN_SEQ_CTRL 0xb4
+
+#define AR934X_NFC_CMD_CMD_SEQ_S 0
+#define AR934X_NFC_CMD_CMD_SEQ_M 0x3f
+#define AR934X_NFC_CMD_SEQ_1C 0x00
+#define AR934X_NFC_CMD_SEQ_ERASE 0x0e
+#define AR934X_NFC_CMD_SEQ_12 0x0c
+#define AR934X_NFC_CMD_SEQ_1C1AXR 0x21
+#define AR934X_NFC_CMD_SEQ_S 0x24
+#define AR934X_NFC_CMD_SEQ_1C3AXR 0x27
+#define AR934X_NFC_CMD_SEQ_1C5A1CXR 0x2a
+#define AR934X_NFC_CMD_SEQ_18 0x32
+#define AR934X_NFC_CMD_INPUT_SEL_SIU 0
+#define AR934X_NFC_CMD_INPUT_SEL_DMA BIT(6)
+#define AR934X_NFC_CMD_ADDR_SEL_0 0
+#define AR934X_NFC_CMD_ADDR_SEL_1 BIT(7)
+#define AR934X_NFC_CMD_CMD0_S 8
+#define AR934X_NFC_CMD_CMD0_M 0xff
+#define AR934X_NFC_CMD_CMD1_S 16
+#define AR934X_NFC_CMD_CMD1_M 0xff
+#define AR934X_NFC_CMD_CMD2_S 24
+#define AR934X_NFC_CMD_CMD2_M 0xff
+
+#define AR934X_NFC_CTRL_ADDR_CYCLE0_M 0x7
+#define AR934X_NFC_CTRL_ADDR_CYCLE0_S 0
+#define AR934X_NFC_CTRL_SPARE_EN BIT(3)
+#define AR934X_NFC_CTRL_INT_EN BIT(4)
+#define AR934X_NFC_CTRL_ECC_EN BIT(5)
+#define AR934X_NFC_CTRL_BLOCK_SIZE_S 6
+#define AR934X_NFC_CTRL_BLOCK_SIZE_M 0x3
+#define AR934X_NFC_CTRL_BLOCK_SIZE_32 0
+#define AR934X_NFC_CTRL_BLOCK_SIZE_64 1
+#define AR934X_NFC_CTRL_BLOCK_SIZE_128 2
+#define AR934X_NFC_CTRL_BLOCK_SIZE_256 3
+#define AR934X_NFC_CTRL_PAGE_SIZE_S 8
+#define AR934X_NFC_CTRL_PAGE_SIZE_M 0x7
+#define AR934X_NFC_CTRL_PAGE_SIZE_256 0
+#define AR934X_NFC_CTRL_PAGE_SIZE_512 1
+#define AR934X_NFC_CTRL_PAGE_SIZE_1024 2
+#define AR934X_NFC_CTRL_PAGE_SIZE_2048 3
+#define AR934X_NFC_CTRL_PAGE_SIZE_4096 4
+#define AR934X_NFC_CTRL_PAGE_SIZE_8192 5
+#define AR934X_NFC_CTRL_PAGE_SIZE_16384 6
+#define AR934X_NFC_CTRL_CUSTOM_SIZE_EN BIT(11)
+#define AR934X_NFC_CTRL_IO_WIDTH_8BITS 0
+#define AR934X_NFC_CTRL_IO_WIDTH_16BITS BIT(12)
+#define AR934X_NFC_CTRL_LOOKUP_EN BIT(13)
+#define AR934X_NFC_CTRL_PROT_EN BIT(14)
+#define AR934X_NFC_CTRL_WORK_MODE_ASYNC 0
+#define AR934X_NFC_CTRL_WORK_MODE_SYNC BIT(15)
+#define AR934X_NFC_CTRL_ADDR0_AUTO_INC BIT(16)
+#define AR934X_NFC_CTRL_ADDR1_AUTO_INC BIT(17)
+#define AR934X_NFC_CTRL_ADDR_CYCLE1_M 0x7
+#define AR934X_NFC_CTRL_ADDR_CYCLE1_S 18
+#define AR934X_NFC_CTRL_SMALL_PAGE BIT(21)
+
+#define AR934X_NFC_DMA_CTRL_DMA_START BIT(7)
+#define AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE 0
+#define AR934X_NFC_DMA_CTRL_DMA_DIR_READ BIT(6)
+#define AR934X_NFC_DMA_CTRL_DMA_MODE_SG BIT(5)
+#define AR934X_NFC_DMA_CTRL_DMA_BURST_S 2
+#define AR934X_NFC_DMA_CTRL_DMA_BURST_0 0
+#define AR934X_NFC_DMA_CTRL_DMA_BURST_1 1
+#define AR934X_NFC_DMA_CTRL_DMA_BURST_2 2
+#define AR934X_NFC_DMA_CTRL_DMA_BURST_3 3
+#define AR934X_NFC_DMA_CTRL_DMA_BURST_4 4
+#define AR934X_NFC_DMA_CTRL_DMA_BURST_5 5
+#define AR934X_NFC_DMA_CTRL_ERR_FLAG BIT(1)
+#define AR934X_NFC_DMA_CTRL_DMA_READY BIT(0)
+
+#define AR934X_NFC_INT_DEV_RDY(_x) BIT(4 + (_x))
+#define AR934X_NFC_INT_CMD_END BIT(1)
+
+#define AR934X_NFC_ECC_CTRL_ERR_THRES_S 8
+#define AR934X_NFC_ECC_CTRL_ERR_THRES_M 0x1f
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_S 5
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_M 0x7
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_2 0
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_4 1
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_6 2
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_8 3
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_10 4
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_12 5
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_14 6
+#define AR934X_NFC_ECC_CTRL_ECC_CAP_16 7
+#define AR934X_NFC_ECC_CTRL_ERR_OVER BIT(2)
+#define AR934X_NFC_ECC_CTRL_ERR_UNCORRECT BIT(1)
+#define AR934X_NFC_ECC_CTRL_ERR_CORRECT BIT(0)
+
+#define AR934X_NFC_ECC_OFFS_OFSET_M 0xffff
+
+/* default timing values */
+#define AR934X_NFC_TIME_SEQ_DEFAULT 0x7fff
+#define AR934X_NFC_TIMINGS_ASYN_DEFAULT 0x22
+#define AR934X_NFC_TIMINGS_SYN_DEFAULT 0xf
+
+#define AR934X_NFC_ID_BUF_SIZE 8
+#define AR934X_NFC_DEV_READY_TIMEOUT 25 /* msecs */
+#define AR934X_NFC_DMA_READY_TIMEOUT 25 /* msecs */
+#define AR934X_NFC_DONE_TIMEOUT 1000
+#define AR934X_NFC_DMA_RETRIES 20
+
+#define AR934X_NFC_USE_IRQ true
+#define AR934X_NFC_IRQ_MASK AR934X_NFC_INT_DEV_RDY(0)
+
+#define AR934X_NFC_GENSEQ_SMALL_PAGE_READ 0x30043
+
+#undef AR934X_NFC_DEBUG_DATA
+#undef AR934X_NFC_DEBUG
+
+struct ar934x_nfc;
+
+static inline __attribute__ ((format (printf, 2, 3)))
+void _nfc_dbg(struct ar934x_nfc *nfc, const char *fmt, ...)
+{
+}
+
+#ifdef AR934X_NFC_DEBUG
+#define nfc_dbg(_nfc, fmt, ...) \
+ dev_info((_nfc)->parent, fmt, ##__VA_ARGS__)
+#else
+#define nfc_dbg(_nfc, fmt, ...) \
+ _nfc_dbg((_nfc), fmt, ##__VA_ARGS__)
+#endif /* AR934X_NFC_DEBUG */
+
+#ifdef AR934X_NFC_DEBUG_DATA
+static void
+nfc_debug_data(const char *label, void *data, int len)
+{
+ print_hex_dump(KERN_WARNING, label, DUMP_PREFIX_OFFSET, 16, 1,
+ data, len, 0);
+}
+#else
+static inline void
+nfc_debug_data(const char *label, void *data, int len) {}
+#endif /* AR934X_NFC_DEBUG_DATA */
+
+struct ar934x_nfc {
+ struct mtd_info mtd;
+ struct nand_chip nand_chip;
+ struct device *parent;
+ void __iomem *base;
+ void (*select_chip)(int chip_no);
+ bool swap_dma;
+ int irq;
+ wait_queue_head_t irq_waitq;
+
+ bool spurious_irq_expected;
+ u32 irq_status;
+
+ u32 ctrl_reg;
+ u32 ecc_ctrl_reg;
+ u32 ecc_offset_reg;
+ u32 ecc_thres;
+ u32 ecc_oob_pos;
+
+ bool small_page;
+ unsigned int addr_count0;
+ unsigned int addr_count1;
+
+ u8 *buf;
+ dma_addr_t buf_dma;
+ unsigned int buf_size;
+ int buf_index;
+
+ bool read_id;
+
+ int erase1_page_addr;
+
+ int rndout_page_addr;
+ int rndout_read_cmd;
+
+ int seqin_page_addr;
+ int seqin_column;
+ int seqin_read_cmd;
+};
+
+static void ar934x_nfc_restart(struct ar934x_nfc *nfc);
+
+static inline bool
+is_all_ff(u8 *buf, int len)
+{
+ while (len--)
+ if (buf[len] != 0xff)
+ return false;
+
+ return true;
+}
+
+static inline void
+ar934x_nfc_wr(struct ar934x_nfc *nfc, unsigned reg, u32 val)
+{
+ __raw_writel(val, nfc->base + reg);
+}
+
+static inline u32
+ar934x_nfc_rr(struct ar934x_nfc *nfc, unsigned reg)
+{
+ return __raw_readl(nfc->base + reg);
+}
+
+static inline struct ar934x_nfc_platform_data *
+ar934x_nfc_get_platform_data(struct ar934x_nfc *nfc)
+{
+ return nfc->parent->platform_data;
+}
+
+static inline struct
+ar934x_nfc *mtd_to_ar934x_nfc(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct ar934x_nfc, mtd);
+}
+
+static inline bool ar934x_nfc_use_irq(struct ar934x_nfc *nfc)
+{
+ return AR934X_NFC_USE_IRQ;
+}
+
+static inline void ar934x_nfc_write_cmd_reg(struct ar934x_nfc *nfc, u32 cmd_reg)
+{
+ wmb();
+
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_CMD, cmd_reg);
+ /* flush write */
+ ar934x_nfc_rr(nfc, AR934X_NFC_REG_CMD);
+}
+
+static bool
+__ar934x_nfc_dev_ready(struct ar934x_nfc *nfc)
+{
+ u32 status;
+
+ status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS);
+ return (status & 0xff) == 0xff;
+}
+
+static inline bool
+__ar934x_nfc_is_dma_ready(struct ar934x_nfc *nfc)
+{
+ u32 status;
+
+ status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL);
+ return (status & AR934X_NFC_DMA_CTRL_DMA_READY) != 0;
+}
+
+static int
+ar934x_nfc_wait_dev_ready(struct ar934x_nfc *nfc)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT);
+ do {
+ if (__ar934x_nfc_dev_ready(nfc))
+ return 0;
+ } while time_before(jiffies, timeout);
+
+ nfc_dbg(nfc, "timeout waiting for device ready, status:%08x int:%08x\n",
+ ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS),
+ ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS));
+ return -ETIMEDOUT;
+}
+
+static int
+ar934x_nfc_wait_dma_ready(struct ar934x_nfc *nfc)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DMA_READY_TIMEOUT);
+ do {
+ if (__ar934x_nfc_is_dma_ready(nfc))
+ return 0;
+ } while time_before(jiffies, timeout);
+
+ nfc_dbg(nfc, "timeout waiting for DMA ready, dma_ctrl:%08x\n",
+ ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL));
+ return -ETIMEDOUT;
+}
+
+static int
+ar934x_nfc_wait_irq(struct ar934x_nfc *nfc)
+{
+ long timeout;
+ int ret;
+
+ timeout = wait_event_timeout(nfc->irq_waitq,
+ (nfc->irq_status & AR934X_NFC_IRQ_MASK) != 0,
+ msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT));
+
+ ret = 0;
+ if (!timeout) {
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, 0);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
+ /* flush write */
+ ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
+
+ nfc_dbg(nfc,
+ "timeout waiting for interrupt, status:%08x\n",
+ nfc->irq_status);
+ ret = -ETIMEDOUT;
+ }
+
+ nfc->irq_status = 0;
+ return ret;
+}
+
+static int
+ar934x_nfc_wait_done(struct ar934x_nfc *nfc)
+{
+ int ret;
+
+ if (ar934x_nfc_use_irq(nfc))
+ ret = ar934x_nfc_wait_irq(nfc);
+ else
+ ret = ar934x_nfc_wait_dev_ready(nfc);
+
+ if (ret)
+ return ret;
+
+ return ar934x_nfc_wait_dma_ready(nfc);
+}
+
+static int
+ar934x_nfc_alloc_buf(struct ar934x_nfc *nfc, unsigned size)
+{
+ nfc->buf = dma_alloc_coherent(nfc->parent, size,
+ &nfc->buf_dma, GFP_KERNEL);
+ if (nfc->buf == NULL) {
+ dev_err(nfc->parent, "no memory for DMA buffer\n");
+ return -ENOMEM;
+ }
+
+ nfc->buf_size = size;
+ nfc_dbg(nfc, "buf:%p size:%u\n", nfc->buf, nfc->buf_size);
+
+ return 0;
+}
+
+static void
+ar934x_nfc_free_buf(struct ar934x_nfc *nfc)
+{
+ dma_free_coherent(nfc->parent, nfc->buf_size, nfc->buf, nfc->buf_dma);
+}
+
+static void
+ar934x_nfc_get_addr(struct ar934x_nfc *nfc, int column, int page_addr,
+ u32 *addr0, u32 *addr1)
+{
+ u32 a0, a1;
+
+ a0 = 0;
+ a1 = 0;
+
+ if (column == -1) {
+ /* ERASE1 */
+ a0 = (page_addr & 0xffff) << 16;
+ a1 = (page_addr >> 16) & 0xf;
+ } else if (page_addr != -1) {
+ /* SEQIN, READ0, etc.. */
+
+ /* TODO: handle 16bit bus width */
+ if (nfc->small_page) {
+ a0 = column & 0xff;
+ a0 |= (page_addr & 0xff) << 8;
+ a0 |= ((page_addr >> 8) & 0xff) << 16;
+ a0 |= ((page_addr >> 16) & 0xff) << 24;
+ } else {
+ a0 = column & 0x0FFF;
+ a0 |= (page_addr & 0xffff) << 16;
+
+ if (nfc->addr_count0 > 4)
+ a1 = (page_addr >> 16) & 0xf;
+ }
+ }
+
+ *addr0 = a0;
+ *addr1 = a1;
+}
+
+static void
+ar934x_nfc_send_cmd(struct ar934x_nfc *nfc, unsigned command)
+{
+ u32 cmd_reg;
+
+ cmd_reg = AR934X_NFC_CMD_INPUT_SEL_SIU | AR934X_NFC_CMD_ADDR_SEL_0 |
+ AR934X_NFC_CMD_SEQ_1C;
+ cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
+
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
+
+ ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
+ ar934x_nfc_wait_dev_ready(nfc);
+}
+
+static int
+ar934x_nfc_do_rw_command(struct ar934x_nfc *nfc, int column, int page_addr,
+ int len, u32 cmd_reg, u32 ctrl_reg, bool write)
+{
+ u32 addr0, addr1;
+ u32 dma_ctrl;
+ int dir;
+ int err;
+ int retries = 0;
+
+ WARN_ON(len & 3);
+
+ if (WARN_ON(len > nfc->buf_size))
+ dev_err(nfc->parent, "len=%d > buf_size=%d", len, nfc->buf_size);
+
+ if (write) {
+ dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE;
+ dir = DMA_TO_DEVICE;
+ } else {
+ dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_READ;
+ dir = DMA_FROM_DEVICE;
+ }
+
+ ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1);
+
+ dma_ctrl |= AR934X_NFC_DMA_CTRL_DMA_START |
+ (AR934X_NFC_DMA_CTRL_DMA_BURST_3 <<
+ AR934X_NFC_DMA_CTRL_DMA_BURST_S);
+
+ cmd_reg |= AR934X_NFC_CMD_INPUT_SEL_DMA | AR934X_NFC_CMD_ADDR_SEL_0;
+ ctrl_reg |= AR934X_NFC_CTRL_INT_EN;
+
+ nfc_dbg(nfc, "%s a0:%08x a1:%08x len:%x cmd:%08x dma:%08x ctrl:%08x\n",
+ (write) ? "write" : "read",
+ addr0, addr1, len, cmd_reg, dma_ctrl, ctrl_reg);
+
+retry:
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR, nfc->buf_dma);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_COUNT, len);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_DATA_SIZE, len);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_CTRL, dma_ctrl);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_CTRL, nfc->ecc_ctrl_reg);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_OFFSET, nfc->ecc_offset_reg);
+
+ if (ar934x_nfc_use_irq(nfc)) {
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, AR934X_NFC_IRQ_MASK);
+ /* flush write */
+ ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK);
+ }
+
+ ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
+ err = ar934x_nfc_wait_done(nfc);
+ if (err) {
+ dev_dbg(nfc->parent, "%s operation stuck at page %d\n",
+ (write) ? "write" : "read", page_addr);
+
+ ar934x_nfc_restart(nfc);
+ if (retries++ < AR934X_NFC_DMA_RETRIES)
+ goto retry;
+
+ dev_err(nfc->parent, "%s operation failed on page %d\n",
+ (write) ? "write" : "read", page_addr);
+ }
+
+ return err;
+}
+
+static int
+ar934x_nfc_send_readid(struct ar934x_nfc *nfc, unsigned command)
+{
+ u32 cmd_reg;
+ int err;
+
+ nfc_dbg(nfc, "readid, cmd:%02x\n", command);
+
+ cmd_reg = AR934X_NFC_CMD_SEQ_1C1AXR;
+ cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
+
+ err = ar934x_nfc_do_rw_command(nfc, -1, -1, AR934X_NFC_ID_BUF_SIZE,
+ cmd_reg, nfc->ctrl_reg, false);
+
+ nfc_debug_data("[id] ", nfc->buf, AR934X_NFC_ID_BUF_SIZE);
+
+ return err;
+}
+
+static int
+ar934x_nfc_send_read(struct ar934x_nfc *nfc, unsigned command, int column,
+ int page_addr, int len)
+{
+ u32 cmd_reg;
+ int err;
+
+ nfc_dbg(nfc, "read, column=%d page=%d len=%d\n",
+ column, page_addr, len);
+
+ cmd_reg = (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
+
+ if (nfc->small_page) {
+ cmd_reg |= AR934X_NFC_CMD_SEQ_18;
+ } else {
+ cmd_reg |= NAND_CMD_READSTART << AR934X_NFC_CMD_CMD1_S;
+ cmd_reg |= AR934X_NFC_CMD_SEQ_1C5A1CXR;
+ }
+
+ err = ar934x_nfc_do_rw_command(nfc, column, page_addr, len,
+ cmd_reg, nfc->ctrl_reg, false);
+
+ nfc_debug_data("[data] ", nfc->buf, len);
+
+ return err;
+}
+
+static void
+ar934x_nfc_send_erase(struct ar934x_nfc *nfc, unsigned command, int column,
+ int page_addr)
+{
+ u32 addr0, addr1;
+ u32 ctrl_reg;
+ u32 cmd_reg;
+
+ ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1);
+
+ ctrl_reg = nfc->ctrl_reg;
+ if (nfc->small_page) {
+ /* override number of address cycles for the erase command */
+ ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE0_M <<
+ AR934X_NFC_CTRL_ADDR_CYCLE0_S);
+ ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE1_M <<
+ AR934X_NFC_CTRL_ADDR_CYCLE1_S);
+ ctrl_reg &= ~(AR934X_NFC_CTRL_SMALL_PAGE);
+ ctrl_reg |= (nfc->addr_count0 + 1) <<
+ AR934X_NFC_CTRL_ADDR_CYCLE0_S;
+ }
+
+ cmd_reg = NAND_CMD_ERASE1 << AR934X_NFC_CMD_CMD0_S;
+ cmd_reg |= command << AR934X_NFC_CMD_CMD1_S;
+ cmd_reg |= AR934X_NFC_CMD_SEQ_ERASE;
+
+ nfc_dbg(nfc, "erase page %d, a0:%08x a1:%08x cmd:%08x ctrl:%08x\n",
+ page_addr, addr0, addr1, cmd_reg, ctrl_reg);
+
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1);
+
+ ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
+ ar934x_nfc_wait_dev_ready(nfc);
+}
+
+static int
+ar934x_nfc_send_write(struct ar934x_nfc *nfc, unsigned command, int column,
+ int page_addr, int len)
+{
+ u32 cmd_reg;
+
+ nfc_dbg(nfc, "write, column=%d page=%d len=%d\n",
+ column, page_addr, len);
+
+ nfc_debug_data("[data] ", nfc->buf, len);
+
+ cmd_reg = NAND_CMD_SEQIN << AR934X_NFC_CMD_CMD0_S;
+ cmd_reg |= command << AR934X_NFC_CMD_CMD1_S;
+ cmd_reg |= AR934X_NFC_CMD_SEQ_12;
+
+ return ar934x_nfc_do_rw_command(nfc, column, page_addr, len,
+ cmd_reg, nfc->ctrl_reg, true);
+}
+
+static void
+ar934x_nfc_read_status(struct ar934x_nfc *nfc)
+{
+ u32 cmd_reg;
+ u32 status;
+
+ cmd_reg = NAND_CMD_STATUS << AR934X_NFC_CMD_CMD0_S;
+ cmd_reg |= AR934X_NFC_CMD_SEQ_S;
+
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
+
+ ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
+ ar934x_nfc_wait_dev_ready(nfc);
+
+ status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_READ_STATUS);
+
+ nfc_dbg(nfc, "read status, cmd:%08x status:%02x\n",
+ cmd_reg, (status & 0xff));
+
+ if (nfc->swap_dma)
+ nfc->buf[0 ^ 3] = status;
+ else
+ nfc->buf[0] = status;
+}
+
+static void
+ar934x_nfc_cmdfunc(struct mtd_info *mtd, unsigned int command, int column,
+ int page_addr)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ struct nand_chip *nand = mtd->priv;
+
+ nfc->read_id = false;
+ if (command != NAND_CMD_PAGEPROG)
+ nfc->buf_index = 0;
+
+ switch (command) {
+ case NAND_CMD_RESET:
+ ar934x_nfc_send_cmd(nfc, command);
+ break;
+
+ case NAND_CMD_READID:
+ nfc->read_id = true;
+ ar934x_nfc_send_readid(nfc, command);
+ break;
+
+ case NAND_CMD_READ0:
+ case NAND_CMD_READ1:
+ if (nfc->small_page) {
+ ar934x_nfc_send_read(nfc, command, column, page_addr,
+ mtd->writesize + mtd->oobsize);
+ } else {
+ ar934x_nfc_send_read(nfc, command, 0, page_addr,
+ mtd->writesize + mtd->oobsize);
+ nfc->buf_index = column;
+ nfc->rndout_page_addr = page_addr;
+ nfc->rndout_read_cmd = command;
+ }
+ break;
+
+ case NAND_CMD_READOOB:
+ if (nfc->small_page)
+ ar934x_nfc_send_read(nfc, NAND_CMD_READOOB,
+ column, page_addr,
+ mtd->oobsize);
+ else
+ ar934x_nfc_send_read(nfc, NAND_CMD_READ0,
+ mtd->writesize, page_addr,
+ mtd->oobsize);
+ break;
+
+ case NAND_CMD_RNDOUT:
+ if (WARN_ON(nfc->small_page))
+ break;
+
+ /* emulate subpage read */
+ ar934x_nfc_send_read(nfc, nfc->rndout_read_cmd, 0,
+ nfc->rndout_page_addr,
+ mtd->writesize + mtd->oobsize);
+ nfc->buf_index = column;
+ break;
+
+ case NAND_CMD_ERASE1:
+ nfc->erase1_page_addr = page_addr;
+ break;
+
+ case NAND_CMD_ERASE2:
+ ar934x_nfc_send_erase(nfc, command, -1, nfc->erase1_page_addr);
+ break;
+
+ case NAND_CMD_STATUS:
+ ar934x_nfc_read_status(nfc);
+ break;
+
+ case NAND_CMD_SEQIN:
+ if (nfc->small_page) {
+ /* output read command */
+ if (column >= mtd->writesize) {
+ column -= mtd->writesize;
+ nfc->seqin_read_cmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ nfc->seqin_read_cmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ nfc->seqin_read_cmd = NAND_CMD_READ1;
+ }
+ } else {
+ nfc->seqin_read_cmd = NAND_CMD_READ0;
+ }
+ nfc->seqin_column = column;
+ nfc->seqin_page_addr = page_addr;
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ if (nand->ecc.mode == NAND_ECC_HW) {
+ /* the data is already written */
+ break;
+ }
+
+ if (nfc->small_page)
+ ar934x_nfc_send_cmd(nfc, nfc->seqin_read_cmd);
+
+ ar934x_nfc_send_write(nfc, command, nfc->seqin_column,
+ nfc->seqin_page_addr,
+ nfc->buf_index);
+ break;
+
+ default:
+ dev_err(nfc->parent,
+ "unsupported command: %x, column:%d page_addr=%d\n",
+ command, column, page_addr);
+ break;
+ }
+}
+
+static int
+ar934x_nfc_dev_ready(struct mtd_info *mtd)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+
+ return __ar934x_nfc_dev_ready(nfc);
+}
+
+static void
+ar934x_nfc_select_chip(struct mtd_info *mtd, int chip_no)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+
+ if (nfc->select_chip)
+ nfc->select_chip(chip_no);
+}
+
+static u8
+ar934x_nfc_read_byte(struct mtd_info *mtd)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ u8 data;
+
+ WARN_ON(nfc->buf_index >= nfc->buf_size);
+
+ if (nfc->swap_dma || nfc->read_id)
+ data = nfc->buf[nfc->buf_index ^ 3];
+ else
+ data = nfc->buf[nfc->buf_index];
+
+ nfc->buf_index++;
+
+ return data;
+}
+
+static void
+ar934x_nfc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ int i;
+
+ WARN_ON(nfc->buf_index + len > nfc->buf_size);
+
+ if (nfc->swap_dma) {
+ for (i = 0; i < len; i++) {
+ nfc->buf[nfc->buf_index ^ 3] = buf[i];
+ nfc->buf_index++;
+ }
+ } else {
+ for (i = 0; i < len; i++) {
+ nfc->buf[nfc->buf_index] = buf[i];
+ nfc->buf_index++;
+ }
+ }
+}
+
+static void
+ar934x_nfc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ int buf_index;
+ int i;
+
+ WARN_ON(nfc->buf_index + len > nfc->buf_size);
+
+ buf_index = nfc->buf_index;
+
+ if (nfc->swap_dma || nfc->read_id) {
+ for (i = 0; i < len; i++) {
+ buf[i] = nfc->buf[buf_index ^ 3];
+ buf_index++;
+ }
+ } else {
+ for (i = 0; i < len; i++) {
+ buf[i] = nfc->buf[buf_index];
+ buf_index++;
+ }
+ }
+
+ nfc->buf_index = buf_index;
+}
+
+static inline void
+ar934x_nfc_enable_hwecc(struct ar934x_nfc *nfc)
+{
+ nfc->ctrl_reg |= AR934X_NFC_CTRL_ECC_EN;
+ nfc->ctrl_reg &= ~AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
+}
+
+static inline void
+ar934x_nfc_disable_hwecc(struct ar934x_nfc *nfc)
+{
+ nfc->ctrl_reg &= ~AR934X_NFC_CTRL_ECC_EN;
+ nfc->ctrl_reg |= AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
+}
+
+static int
+ar934x_nfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ int err;
+
+ nfc_dbg(nfc, "read_oob: page:%d\n", page);
+
+ err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize, page,
+ mtd->oobsize);
+ if (err)
+ return err;
+
+ memcpy(chip->oob_poi, nfc->buf, mtd->oobsize);
+
+ return 0;
+}
+
+static int
+ar934x_nfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+
+ nfc_dbg(nfc, "write_oob: page:%d\n", page);
+
+ memcpy(nfc->buf, chip->oob_poi, mtd->oobsize);
+
+ return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, mtd->writesize,
+ page, mtd->oobsize);
+}
+
+static int
+ar934x_nfc_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ u8 *buf, int oob_required, int page)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ int len;
+ int err;
+
+ nfc_dbg(nfc, "read_page_raw: page:%d oob:%d\n", page, oob_required);
+
+ len = mtd->writesize;
+ if (oob_required)
+ len += mtd->oobsize;
+
+ err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page, len);
+ if (err)
+ return err;
+
+ memcpy(buf, nfc->buf, mtd->writesize);
+
+ if (oob_required)
+ memcpy(chip->oob_poi, &nfc->buf[mtd->writesize], mtd->oobsize);
+
+ return 0;
+}
+
+static int
+ar934x_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ u8 *buf, int oob_required, int page)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ u32 ecc_ctrl;
+ int max_bitflips = 0;
+ bool ecc_failed;
+ bool ecc_corrected;
+ int err;
+
+ nfc_dbg(nfc, "read_page: page:%d oob:%d\n", page, oob_required);
+
+ ar934x_nfc_enable_hwecc(nfc);
+ err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page,
+ mtd->writesize);
+ ar934x_nfc_disable_hwecc(nfc);
+
+ if (err)
+ return err;
+
+ /* TODO: optimize to avoid memcpy */
+ memcpy(buf, nfc->buf, mtd->writesize);
+
+ /* read the ECC status */
+ ecc_ctrl = ar934x_nfc_rr(nfc, AR934X_NFC_REG_ECC_CTRL);
+ ecc_failed = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_UNCORRECT;
+ ecc_corrected = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_CORRECT;
+
+ if (oob_required || ecc_failed) {
+ err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize,
+ page, mtd->oobsize);
+ if (err)
+ return err;
+
+ if (oob_required)
+ memcpy(chip->oob_poi, nfc->buf, mtd->oobsize);
+ }
+
+ if (ecc_failed) {
+ /*
+ * The hardware ECC engine reports uncorrectable errors
+ * on empty pages. Check the ECC bytes and the data. If
+ * both contains 0xff bytes only, dont report a failure.
+ *
+ * TODO: prebuild a buffer with 0xff bytes and use memcmp
+ * for better performance?
+ */
+ if (!is_all_ff(&nfc->buf[nfc->ecc_oob_pos], chip->ecc.total) ||
+ !is_all_ff(buf, mtd->writesize))
+ mtd->ecc_stats.failed++;
+ } else if (ecc_corrected) {
+ /*
+ * The hardware does not report the exact count of the
+ * corrected bitflips, use assumptions based on the
+ * threshold.
+ */
+ if (ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_OVER) {
+ /*
+ * The number of corrected bitflips exceeds the
+ * threshold. Assume the maximum.
+ */
+ max_bitflips = chip->ecc.strength * chip->ecc.steps;
+ } else {
+ max_bitflips = nfc->ecc_thres * chip->ecc.steps;
+ }
+
+ mtd->ecc_stats.corrected += max_bitflips;
+ }
+
+ return max_bitflips;
+}
+
+static int
+ar934x_nfc_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const u8 *buf, int oob_required)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ int page;
+ int len;
+
+ page = nfc->seqin_page_addr;
+
+ nfc_dbg(nfc, "write_page_raw: page:%d oob:%d\n", page, oob_required);
+
+ memcpy(nfc->buf, buf, mtd->writesize);
+ len = mtd->writesize;
+
+ if (oob_required) {
+ memcpy(&nfc->buf[mtd->writesize], chip->oob_poi, mtd->oobsize);
+ len += mtd->oobsize;
+ }
+
+ return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page, len);
+}
+
+static int
+ar934x_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const u8 *buf, int oob_required)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ int page;
+ int err;
+
+ page = nfc->seqin_page_addr;
+
+ nfc_dbg(nfc, "write_page: page:%d oob:%d\n", page, oob_required);
+
+ /* write OOB first */
+ if (oob_required &&
+ !is_all_ff(chip->oob_poi, mtd->oobsize)) {
+ err = ar934x_nfc_write_oob(mtd, chip, page);
+ if (err)
+ return err;
+ }
+
+ /* TODO: optimize to avoid memcopy */
+ memcpy(nfc->buf, buf, mtd->writesize);
+
+ ar934x_nfc_enable_hwecc(nfc);
+ err = ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page,
+ mtd->writesize);
+ ar934x_nfc_disable_hwecc(nfc);
+
+ return err;
+}
+
+static void
+ar934x_nfc_hw_init(struct ar934x_nfc *nfc)
+{
+ struct ar934x_nfc_platform_data *pdata;
+
+ pdata = ar934x_nfc_get_platform_data(nfc);
+ if (pdata->hw_reset) {
+ pdata->hw_reset(true);
+ pdata->hw_reset(false);
+ }
+
+ /*
+ * setup timings
+ * TODO: make it configurable via platform data
+ */
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIME_SEQ,
+ AR934X_NFC_TIME_SEQ_DEFAULT);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_ASYN,
+ AR934X_NFC_TIMINGS_ASYN_DEFAULT);
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_SYN,
+ AR934X_NFC_TIMINGS_SYN_DEFAULT);
+
+ /* disable WP on all chips, and select chip 0 */
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_MEM_CTRL, 0xff00);
+
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR_OFFS, 0);
+
+ /* initialize Control register */
+ nfc->ctrl_reg = AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
+
+ if (nfc->small_page) {
+ /* Setup generic sequence register for small page reads. */
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_GEN_SEQ_CTRL,
+ AR934X_NFC_GENSEQ_SMALL_PAGE_READ);
+ }
+}
+
+static void
+ar934x_nfc_restart(struct ar934x_nfc *nfc)
+{
+ u32 ctrl_reg;
+
+ if (nfc->select_chip)
+ nfc->select_chip(-1);
+
+ ctrl_reg = nfc->ctrl_reg;
+ ar934x_nfc_hw_init(nfc);
+ nfc->ctrl_reg = ctrl_reg;
+
+ if (nfc->select_chip)
+ nfc->select_chip(0);
+
+ ar934x_nfc_send_cmd(nfc, NAND_CMD_RESET);
+}
+
+static irqreturn_t
+ar934x_nfc_irq_handler(int irq, void *data)
+{
+ struct ar934x_nfc *nfc = data;
+ u32 status;
+
+ status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
+
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
+ /* flush write */
+ ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
+
+ status &= ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK);
+ if (status) {
+ nfc_dbg(nfc, "got IRQ, status:%08x\n", status);
+
+ nfc->irq_status = status;
+ nfc->spurious_irq_expected = true;
+ wake_up(&nfc->irq_waitq);
+ } else {
+ if (nfc->spurious_irq_expected) {
+ nfc->spurious_irq_expected = false;
+ } else {
+ dev_warn(nfc->parent, "spurious interrupt\n");
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int
+ar934x_nfc_init_tail(struct mtd_info *mtd)
+{
+ struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
+ struct nand_chip *chip = &nfc->nand_chip;
+ u32 ctrl;
+ u32 t;
+ int err;
+
+ switch (mtd->oobsize) {
+ case 16:
+ case 64:
+ case 128:
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_SPARE_SIZE, mtd->oobsize);
+ break;
+
+ default:
+ dev_err(nfc->parent, "unsupported OOB size: %d bytes\n",
+ mtd->oobsize);
+ return -ENXIO;
+ }
+
+ ctrl = AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
+
+ switch (mtd->erasesize / mtd->writesize) {
+ case 32:
+ t = AR934X_NFC_CTRL_BLOCK_SIZE_32;
+ break;
+
+ case 64:
+ t = AR934X_NFC_CTRL_BLOCK_SIZE_64;
+ break;
+
+ case 128:
+ t = AR934X_NFC_CTRL_BLOCK_SIZE_128;
+ break;
+
+ case 256:
+ t = AR934X_NFC_CTRL_BLOCK_SIZE_256;
+ break;
+
+ default:
+ dev_err(nfc->parent, "unsupported block size: %u\n",
+ mtd->erasesize / mtd->writesize);
+ return -ENXIO;
+ }
+
+ ctrl |= t << AR934X_NFC_CTRL_BLOCK_SIZE_S;
+
+ switch (mtd->writesize) {
+ case 256:
+ nfc->small_page = 1;
+ t = AR934X_NFC_CTRL_PAGE_SIZE_256;
+ break;
+
+ case 512:
+ nfc->small_page = 1;
+ t = AR934X_NFC_CTRL_PAGE_SIZE_512;
+ break;
+
+ case 1024:
+ t = AR934X_NFC_CTRL_PAGE_SIZE_1024;
+ break;
+
+ case 2048:
+ t = AR934X_NFC_CTRL_PAGE_SIZE_2048;
+ break;
+
+ case 4096:
+ t = AR934X_NFC_CTRL_PAGE_SIZE_4096;
+ break;
+
+ case 8192:
+ t = AR934X_NFC_CTRL_PAGE_SIZE_8192;
+ break;
+
+ case 16384:
+ t = AR934X_NFC_CTRL_PAGE_SIZE_16384;
+ break;
+
+ default:
+ dev_err(nfc->parent, "unsupported write size: %d bytes\n",
+ mtd->writesize);
+ return -ENXIO;
+ }
+
+ ctrl |= t << AR934X_NFC_CTRL_PAGE_SIZE_S;
+
+ if (nfc->small_page) {
+ ctrl |= AR934X_NFC_CTRL_SMALL_PAGE;
+
+ if (chip->chipsize > (32 << 20)) {
+ nfc->addr_count0 = 4;
+ nfc->addr_count1 = 3;
+ } else if (chip->chipsize > (2 << 16)) {
+ nfc->addr_count0 = 3;
+ nfc->addr_count1 = 2;
+ } else {
+ nfc->addr_count0 = 2;
+ nfc->addr_count1 = 1;
+ }
+ } else {
+ if (chip->chipsize > (128 << 20)) {
+ nfc->addr_count0 = 5;
+ nfc->addr_count1 = 3;
+ } else if (chip->chipsize > (8 << 16)) {
+ nfc->addr_count0 = 4;
+ nfc->addr_count1 = 2;
+ } else {
+ nfc->addr_count0 = 3;
+ nfc->addr_count1 = 1;
+ }
+ }
+
+ ctrl |= nfc->addr_count0 << AR934X_NFC_CTRL_ADDR_CYCLE0_S;
+ ctrl |= nfc->addr_count1 << AR934X_NFC_CTRL_ADDR_CYCLE1_S;
+
+ nfc->ctrl_reg = ctrl;
+ ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
+
+ ar934x_nfc_free_buf(nfc);
+ err = ar934x_nfc_alloc_buf(nfc, mtd->writesize + mtd->oobsize);
+
+ return err;
+}
+
+static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = {
+ .eccbytes = 28,
+ .eccpos = {
+ 20, 21, 22, 23, 24, 25, 26,
+ 27, 28, 29, 30, 31, 32, 33,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46, 47,
+ },
+ .oobfree = {
+ {
+ .offset = 4,
+ .length = 16,
+ },
+ {
+ .offset = 48,
+ .length = 16,
+ },
+ },
+};
+
+static int
+ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
+{
+ struct nand_chip *nand = &nfc->nand_chip;
+ u32 ecc_cap;
+ u32 ecc_thres;
+
+ if (!config_enabled(CONFIG_MTD_NAND_AR934X_HW_ECC)) {
+ dev_err(nfc->parent, "hardware ECC support is disabled\n");
+ return -EINVAL;
+ }
+
+ switch (nfc->mtd.writesize) {
+ case 2048:
+ /*
+ * Writing a subpage separately is not supported, because
+ * the controller only does ECC on full-page accesses.
+ */
+ nand->options = NAND_NO_SUBPAGE_WRITE;
+
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 7;
+ nand->ecc.strength = 4;
+ nand->ecc.layout = &ar934x_nfc_oob_64_hwecc;
+ break;
+
+ default:
+ dev_err(nfc->parent,
+ "hardware ECC is not available for %d byte pages\n",
+ nfc->mtd.writesize);
+ return -EINVAL;
+ }
+
+ BUG_ON(!nand->ecc.layout);
+
+ switch (nand->ecc.strength) {
+ case 4:
+ ecc_cap = AR934X_NFC_ECC_CTRL_ECC_CAP_4;
+ ecc_thres = 4;
+ break;
+
+ default:
+ dev_err(nfc->parent, "unsupported ECC strength %u\n",
+ nand->ecc.strength);
+ return -EINVAL;
+ }
+
+ nfc->ecc_thres = ecc_thres;
+ nfc->ecc_oob_pos = nand->ecc.layout->eccpos[0];
+
+ nfc->ecc_ctrl_reg = ecc_cap << AR934X_NFC_ECC_CTRL_ECC_CAP_S;
+ nfc->ecc_ctrl_reg |= ecc_thres << AR934X_NFC_ECC_CTRL_ERR_THRES_S;
+
+ nfc->ecc_offset_reg = nfc->mtd.writesize + nfc->ecc_oob_pos;
+
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.read_page = ar934x_nfc_read_page;
+ nand->ecc.read_page_raw = ar934x_nfc_read_page_raw;
+ nand->ecc.write_page = ar934x_nfc_write_page;
+ nand->ecc.write_page_raw = ar934x_nfc_write_page_raw;
+ nand->ecc.read_oob = ar934x_nfc_read_oob;
+ nand->ecc.write_oob = ar934x_nfc_write_oob;
+
+ return 0;
+}
+
+static int
+ar934x_nfc_probe(struct platform_device *pdev)
+{
+ static const char *part_probes[] = { "cmdlinepart", NULL, };
+ struct ar934x_nfc_platform_data *pdata;
+ struct ar934x_nfc *nfc;
+ struct resource *res;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ struct mtd_part_parser_data ppdata;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ return -EINVAL;
+ }
+
+ nfc = devm_kzalloc(&pdev->dev, sizeof(struct ar934x_nfc), GFP_KERNEL);
+ if (!nfc) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ nfc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(nfc->base)) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ return PTR_ERR(nfc->base);
+ }
+
+ nfc->irq = platform_get_irq(pdev, 0);
+ if (nfc->irq < 0) {
+ dev_err(&pdev->dev, "no IRQ resource specified\n");
+ return -EINVAL;
+ }
+
+ init_waitqueue_head(&nfc->irq_waitq);
+ ret = request_irq(nfc->irq, ar934x_nfc_irq_handler, IRQF_DISABLED,
+ dev_name(&pdev->dev), nfc);
+ if (ret) {
+ dev_err(&pdev->dev, "requast_irq failed, err:%d\n", ret);
+ return ret;
+ }
+
+ nfc->parent = &pdev->dev;
+ nfc->select_chip = pdata->select_chip;
+ nfc->swap_dma = pdata->swap_dma;
+
+ nand = &nfc->nand_chip;
+ mtd = &nfc->mtd;
+
+ mtd->priv = nand;
+ mtd->owner = THIS_MODULE;
+ if (pdata->name)
+ mtd->name = pdata->name;
+ else
+ mtd->name = dev_name(&pdev->dev);
+
+ nand->chip_delay = 25;
+
+ nand->dev_ready = ar934x_nfc_dev_ready;
+ nand->cmdfunc = ar934x_nfc_cmdfunc;
+ nand->read_byte = ar934x_nfc_read_byte;
+ nand->write_buf = ar934x_nfc_write_buf;
+ nand->read_buf = ar934x_nfc_read_buf;
+ nand->select_chip = ar934x_nfc_select_chip;
+
+ ret = ar934x_nfc_alloc_buf(nfc, AR934X_NFC_ID_BUF_SIZE);
+ if (ret)
+ goto err_free_irq;
+
+ platform_set_drvdata(pdev, nfc);
+
+ ar934x_nfc_hw_init(nfc);
+
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "nand_scan_ident failed, err:%d\n", ret);
+ goto err_free_buf;
+ }
+
+ ret = ar934x_nfc_init_tail(mtd);
+ if (ret) {
+ dev_err(&pdev->dev, "init tail failed, err:%d\n", ret);
+ goto err_free_buf;
+ }
+
+ if (pdata->scan_fixup) {
+ ret = pdata->scan_fixup(mtd);
+ if (ret)
+ goto err_free_buf;
+ }
+
+ switch (pdata->ecc_mode) {
+ case AR934X_NFC_ECC_SOFT:
+ nand->ecc.mode = NAND_ECC_SOFT;
+ break;
+
+ case AR934X_NFC_ECC_HW:
+ ret = ar934x_nfc_setup_hwecc(nfc);
+ if (ret)
+ goto err_free_buf;
+
+ break;
+
+ default:
+ dev_err(nfc->parent, "unknown ECC mode %d\n", pdata->ecc_mode);
+ return -EINVAL;
+ }
+
+ ret = nand_scan_tail(mtd);
+ if (ret) {
+ dev_err(&pdev->dev, "scan tail failed, err:%d\n", ret);
+ goto err_free_buf;
+ }
+
+ memset(&ppdata, '\0', sizeof(ppdata));
+ ret = mtd_device_parse_register(mtd, part_probes, &ppdata,
+ pdata->parts, pdata->nr_parts);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to register mtd, err:%d\n", ret);
+ goto err_free_buf;
+ }
+
+ return 0;
+
+err_free_buf:
+ ar934x_nfc_free_buf(nfc);
+err_free_irq:
+ free_irq(nfc->irq, nfc);
+ return ret;
+}
+
+static int
+ar934x_nfc_remove(struct platform_device *pdev)
+{
+ struct ar934x_nfc *nfc;
+
+ nfc = platform_get_drvdata(pdev);
+ if (nfc) {
+ nand_release(&nfc->mtd);
+ ar934x_nfc_free_buf(nfc);
+ free_irq(nfc->irq, nfc);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ar934x_nfc_driver = {
+ .probe = ar934x_nfc_probe,
+ .remove = ar934x_nfc_remove,
+ .driver = {
+ .name = AR934X_NFC_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ar934x_nfc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_DESCRIPTION("Atheros AR934x NAND Flash Controller driver");
+MODULE_ALIAS("platform:" AR934X_NFC_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb4xx_nand.c b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb4xx_nand.c
new file mode 100644
index 0000000..5b9841b
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb4xx_nand.c
@@ -0,0 +1,305 @@
+/*
+ * NAND flash driver for the MikroTik RouterBoard 4xx series
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * This file was based on the driver for Linux 2.6.22 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/rb4xx_cpld.h>
+
+#define DRV_NAME "rb4xx-nand"
+#define DRV_VERSION "0.2.0"
+#define DRV_DESC "NAND flash driver for RouterBoard 4xx series"
+
+#define RB4XX_NAND_GPIO_READY 5
+#define RB4XX_NAND_GPIO_ALE 37
+#define RB4XX_NAND_GPIO_CLE 38
+#define RB4XX_NAND_GPIO_NCE 39
+
+struct rb4xx_nand_info {
+ struct nand_chip chip;
+ struct mtd_info mtd;
+};
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb4xx_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb4xx_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY);
+}
+
+static void rb4xx_nand_write_cmd(unsigned char cmd)
+{
+ unsigned char data = cmd;
+ int err;
+
+ err = rb4xx_cpld_write(&data, 1);
+ if (err)
+ pr_err("rb4xx_nand: write cmd failed, err=%d\n", err);
+}
+
+static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CTRL_CHANGE) {
+ gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE,
+ (ctrl & NAND_CLE) ? 1 : 0);
+ gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE,
+ (ctrl & NAND_ALE) ? 1 : 0);
+ gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE,
+ (ctrl & NAND_NCE) ? 0 : 1);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ rb4xx_nand_write_cmd(cmd);
+}
+
+static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd)
+{
+ unsigned char data = 0;
+ int err;
+
+ err = rb4xx_cpld_read(&data, NULL, 1);
+ if (err) {
+ pr_err("rb4xx_nand: read data failed, err=%d\n", err);
+ data = 0xff;
+ }
+
+ return data;
+}
+
+static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf,
+ int len)
+{
+ int err;
+
+ err = rb4xx_cpld_write(buf, len);
+ if (err)
+ pr_err("rb4xx_nand: write buf failed, err=%d\n", err);
+}
+
+static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf,
+ int len)
+{
+ int err;
+
+ err = rb4xx_cpld_read(buf, NULL, len);
+ if (err)
+ pr_err("rb4xx_nand: read buf failed, err=%d\n", err);
+}
+
+static int rb4xx_nand_probe(struct platform_device *pdev)
+{
+ struct rb4xx_nand_info *info;
+ int ret;
+
+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+ ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_READY);
+ goto err;
+ }
+
+ ret = gpio_direction_input(RB4XX_NAND_GPIO_READY);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set input mode on gpio %d\n",
+ RB4XX_NAND_GPIO_READY);
+ goto err_free_gpio_ready;
+ }
+
+ ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_ALE);
+ goto err_free_gpio_ready;
+ }
+
+ ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+ RB4XX_NAND_GPIO_ALE);
+ goto err_free_gpio_ale;
+ }
+
+ ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_CLE);
+ goto err_free_gpio_ale;
+ }
+
+ ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+ RB4XX_NAND_GPIO_CLE);
+ goto err_free_gpio_cle;
+ }
+
+ ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_NCE);
+ goto err_free_gpio_cle;
+ }
+
+ ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+ RB4XX_NAND_GPIO_ALE);
+ goto err_free_gpio_nce;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n");
+ ret = -ENOMEM;
+ goto err_free_gpio_nce;
+ }
+
+ info->chip.priv = &info;
+ info->mtd.priv = &info->chip;
+ info->mtd.owner = THIS_MODULE;
+
+ info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl;
+ info->chip.dev_ready = rb4xx_nand_dev_ready;
+ info->chip.read_byte = rb4xx_nand_read_byte;
+ info->chip.write_buf = rb4xx_nand_write_buf;
+ info->chip.read_buf = rb4xx_nand_read_buf;
+
+ info->chip.chip_delay = 25;
+ info->chip.ecc.mode = NAND_ECC_SOFT;
+
+ platform_set_drvdata(pdev, info);
+
+ ret = nand_scan_ident(&info->mtd, 1, NULL);
+ if (ret) {
+ ret = -ENXIO;
+ goto err_free_info;
+ }
+
+ if (info->mtd.writesize == 512)
+ info->chip.ecc.layout = &rb4xx_nand_ecclayout;
+
+ ret = nand_scan_tail(&info->mtd);
+ if (ret) {
+ return -ENXIO;
+ goto err_set_drvdata;
+ }
+
+ mtd_device_register(&info->mtd, rb4xx_nand_partitions,
+ ARRAY_SIZE(rb4xx_nand_partitions));
+ if (ret)
+ goto err_release_nand;
+
+ return 0;
+
+err_release_nand:
+ nand_release(&info->mtd);
+err_set_drvdata:
+ platform_set_drvdata(pdev, NULL);
+err_free_info:
+ kfree(info);
+err_free_gpio_nce:
+ gpio_free(RB4XX_NAND_GPIO_NCE);
+err_free_gpio_cle:
+ gpio_free(RB4XX_NAND_GPIO_CLE);
+err_free_gpio_ale:
+ gpio_free(RB4XX_NAND_GPIO_ALE);
+err_free_gpio_ready:
+ gpio_free(RB4XX_NAND_GPIO_READY);
+err:
+ return ret;
+}
+
+static int rb4xx_nand_remove(struct platform_device *pdev)
+{
+ struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
+
+ nand_release(&info->mtd);
+ platform_set_drvdata(pdev, NULL);
+ kfree(info);
+ gpio_free(RB4XX_NAND_GPIO_NCE);
+ gpio_free(RB4XX_NAND_GPIO_CLE);
+ gpio_free(RB4XX_NAND_GPIO_ALE);
+ gpio_free(RB4XX_NAND_GPIO_READY);
+
+ return 0;
+}
+
+static struct platform_driver rb4xx_nand_driver = {
+ .probe = rb4xx_nand_probe,
+ .remove = rb4xx_nand_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rb4xx_nand_init(void)
+{
+ return platform_driver_register(&rb4xx_nand_driver);
+}
+
+static void __exit rb4xx_nand_exit(void)
+{
+ platform_driver_unregister(&rb4xx_nand_driver);
+}
+
+module_init(rb4xx_nand_init);
+module_exit(rb4xx_nand_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb750_nand.c b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb750_nand.c
new file mode 100644
index 0000000..a20409b
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb750_nand.c
@@ -0,0 +1,354 @@
+/*
+ * NAND flash driver for the MikroTik RouterBOARD 750
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/mach-rb750.h>
+
+#define DRV_NAME "rb750-nand"
+#define DRV_VERSION "0.1.0"
+#define DRV_DESC "NAND flash driver for the RouterBOARD 750"
+
+#define RB750_NAND_IO0 BIT(RB750_GPIO_NAND_IO0)
+#define RB750_NAND_ALE BIT(RB750_GPIO_NAND_ALE)
+#define RB750_NAND_CLE BIT(RB750_GPIO_NAND_CLE)
+#define RB750_NAND_NRE BIT(RB750_GPIO_NAND_NRE)
+#define RB750_NAND_NWE BIT(RB750_GPIO_NAND_NWE)
+#define RB750_NAND_RDY BIT(RB750_GPIO_NAND_RDY)
+
+#define RB750_NAND_DATA_SHIFT 1
+#define RB750_NAND_DATA_BITS (0xff << RB750_NAND_DATA_SHIFT)
+#define RB750_NAND_INPUT_BITS (RB750_NAND_DATA_BITS | RB750_NAND_RDY)
+#define RB750_NAND_OUTPUT_BITS (RB750_NAND_ALE | RB750_NAND_CLE | \
+ RB750_NAND_NRE | RB750_NAND_NWE)
+
+struct rb750_nand_info {
+ struct nand_chip chip;
+ struct mtd_info mtd;
+ struct rb7xx_nand_platform_data *pdata;
+};
+
+static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct rb750_nand_info, mtd);
+}
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb750_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb750_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static void rb750_nand_write(const u8 *buf, unsigned len)
+{
+ void __iomem *base = ath79_gpio_base;
+ u32 out;
+ u32 t;
+ unsigned i;
+
+ /* set data lines to output mode */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
+
+ out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
+ out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
+ for (i = 0; i != len; i++) {
+ u32 data;
+
+ data = buf[i];
+ data <<= RB750_NAND_DATA_SHIFT;
+ data |= out;
+ __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
+
+ __raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_OUT);
+ }
+
+ /* set data lines to input mode */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_OE);
+}
+
+static void rb750_nand_read(u8 *read_buf, unsigned len)
+{
+ void __iomem *base = ath79_gpio_base;
+ unsigned i;
+
+ for (i = 0; i < len; i++) {
+ u8 data;
+
+ /* activate RE line */
+ __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
+
+ /* read input lines */
+ data = __raw_readl(base + AR71XX_GPIO_REG_IN) >>
+ RB750_NAND_DATA_SHIFT;
+
+ /* deactivate RE line */
+ __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
+
+ read_buf[i] = data;
+ }
+}
+
+static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct rb750_nand_info *rbinfo = mtd_to_rbinfo(mtd);
+ void __iomem *base = ath79_gpio_base;
+ u32 t;
+
+ if (chip >= 0) {
+ rbinfo->pdata->enable_pins();
+
+ /* set input mode for data lines */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t & ~RB750_NAND_INPUT_BITS,
+ base + AR71XX_GPIO_REG_OE);
+
+ /* deactivate RE and WE lines */
+ __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
+ base + AR71XX_GPIO_REG_SET);
+ /* flush write */
+ (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
+
+ /* activate CE line */
+ __raw_writel(rbinfo->pdata->nce_line,
+ base + AR71XX_GPIO_REG_CLEAR);
+ } else {
+ /* deactivate CE line */
+ __raw_writel(rbinfo->pdata->nce_line,
+ base + AR71XX_GPIO_REG_SET);
+ /* flush write */
+ (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
+
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY,
+ base + AR71XX_GPIO_REG_OE);
+
+ rbinfo->pdata->disable_pins();
+ }
+}
+
+static int rb750_nand_dev_ready(struct mtd_info *mtd)
+{
+ void __iomem *base = ath79_gpio_base;
+
+ return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY);
+}
+
+static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CTRL_CHANGE) {
+ void __iomem *base = ath79_gpio_base;
+ u32 t;
+
+ t = __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+ t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
+ t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
+ t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
+
+ __raw_writel(t, base + AR71XX_GPIO_REG_OUT);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_OUT);
+ }
+
+ if (cmd != NAND_CMD_NONE) {
+ u8 t = cmd;
+ rb750_nand_write(&t, 1);
+ }
+}
+
+static u8 rb750_nand_read_byte(struct mtd_info *mtd)
+{
+ u8 data = 0;
+ rb750_nand_read(&data, 1);
+ return data;
+}
+
+static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ rb750_nand_read(buf, len);
+}
+
+static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ rb750_nand_write(buf, len);
+}
+
+static void __init rb750_nand_gpio_init(struct rb750_nand_info *info)
+{
+ void __iomem *base = ath79_gpio_base;
+ u32 out;
+ u32 t;
+
+ out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+ /* setup output levels */
+ __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
+ base + AR71XX_GPIO_REG_SET);
+
+ __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
+ base + AR71XX_GPIO_REG_CLEAR);
+
+ /* setup input lines */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE);
+
+ /* setup output lines */
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t |= RB750_NAND_OUTPUT_BITS;
+ t |= info->pdata->nce_line;
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+
+ info->pdata->latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
+}
+
+static int rb750_nand_probe(struct platform_device *pdev)
+{
+ struct rb750_nand_info *info;
+ struct rb7xx_nand_platform_data *pdata;
+ int ret;
+
+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->chip.priv = &info;
+ info->mtd.priv = &info->chip;
+ info->mtd.owner = THIS_MODULE;
+
+ info->chip.select_chip = rb750_nand_select_chip;
+ info->chip.cmd_ctrl = rb750_nand_cmd_ctrl;
+ info->chip.dev_ready = rb750_nand_dev_ready;
+ info->chip.read_byte = rb750_nand_read_byte;
+ info->chip.write_buf = rb750_nand_write_buf;
+ info->chip.read_buf = rb750_nand_read_buf;
+
+ info->chip.chip_delay = 25;
+ info->chip.ecc.mode = NAND_ECC_SOFT;
+
+ info->pdata = pdata;
+
+ platform_set_drvdata(pdev, info);
+
+ rb750_nand_gpio_init(info);
+
+ ret = nand_scan_ident(&info->mtd, 1, NULL);
+ if (ret) {
+ ret = -ENXIO;
+ goto err_free_info;
+ }
+
+ if (info->mtd.writesize == 512)
+ info->chip.ecc.layout = &rb750_nand_ecclayout;
+
+ ret = nand_scan_tail(&info->mtd);
+ if (ret) {
+ return -ENXIO;
+ goto err_set_drvdata;
+ }
+
+ ret = mtd_device_register(&info->mtd, rb750_nand_partitions,
+ ARRAY_SIZE(rb750_nand_partitions));
+ if (ret)
+ goto err_release_nand;
+
+ return 0;
+
+err_release_nand:
+ nand_release(&info->mtd);
+err_set_drvdata:
+ platform_set_drvdata(pdev, NULL);
+err_free_info:
+ kfree(info);
+ return ret;
+}
+
+static int rb750_nand_remove(struct platform_device *pdev)
+{
+ struct rb750_nand_info *info = platform_get_drvdata(pdev);
+
+ nand_release(&info->mtd);
+ platform_set_drvdata(pdev, NULL);
+ kfree(info);
+
+ return 0;
+}
+
+static struct platform_driver rb750_nand_driver = {
+ .probe = rb750_nand_probe,
+ .remove = rb750_nand_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rb750_nand_init(void)
+{
+ return platform_driver_register(&rb750_nand_driver);
+}
+
+static void __exit rb750_nand_exit(void)
+{
+ platform_driver_unregister(&rb750_nand_driver);
+}
+
+module_init(rb750_nand_init);
+module_exit(rb750_nand_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb91x_nand.c b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb91x_nand.c
new file mode 100644
index 0000000..f0aa3c3
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/mtd/nand/rb91x_nand.c
@@ -0,0 +1,377 @@
+/*
+ * NAND flash driver for the MikroTik RouterBOARD 91x series
+ *
+ * Copyright (C) 2013-2014 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/rb91x_nand.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#define DRV_DESC "NAND flash driver for the RouterBOARD 91x series"
+
+#define RB91X_NAND_NRWE BIT(12)
+
+#define RB91X_NAND_DATA_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) |\
+ BIT(13) | BIT(14) | BIT(15))
+
+#define RB91X_NAND_INPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_RDY)
+#define RB91X_NAND_OUTPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
+
+#define RB91X_NAND_LOW_DATA_MASK 0x1f
+#define RB91X_NAND_HIGH_DATA_MASK 0xe0
+#define RB91X_NAND_HIGH_DATA_SHIFT 8
+
+struct rb91x_nand_info {
+ struct nand_chip chip;
+ struct mtd_info mtd;
+ struct device *dev;
+
+ int gpio_nce;
+ int gpio_ale;
+ int gpio_cle;
+ int gpio_rdy;
+ int gpio_read;
+ int gpio_nrw;
+ int gpio_nle;
+};
+
+static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct rb91x_nand_info, mtd);
+}
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb91x_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb91x_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static void rb91x_nand_write(struct rb91x_nand_info *rbni,
+ const u8 *buf,
+ unsigned len)
+{
+ void __iomem *base = ath79_gpio_base;
+ u32 oe_reg;
+ u32 out_reg;
+ u32 out;
+ unsigned i;
+
+ /* enable the latch */
+ gpio_set_value_cansleep(rbni->gpio_nle, 0);
+
+ oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+ /* set data lines to output mode */
+ __raw_writel(oe_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE),
+ base + AR71XX_GPIO_REG_OE);
+
+ out = out_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE);
+ for (i = 0; i != len; i++) {
+ u32 data;
+
+ data = (buf[i] & RB91X_NAND_HIGH_DATA_MASK) <<
+ RB91X_NAND_HIGH_DATA_SHIFT;
+ data |= buf[i] & RB91X_NAND_LOW_DATA_MASK;
+ data |= out;
+ __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
+
+ /* deactivate WE line */
+ data |= RB91X_NAND_NRWE;
+ __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_OUT);
+ }
+
+ /* restore registers */
+ __raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
+ __raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+ /* disable the latch */
+ gpio_set_value_cansleep(rbni->gpio_nle, 1);
+}
+
+static void rb91x_nand_read(struct rb91x_nand_info *rbni,
+ u8 *read_buf,
+ unsigned len)
+{
+ void __iomem *base = ath79_gpio_base;
+ u32 oe_reg;
+ u32 out_reg;
+ unsigned i;
+
+ /* enable read mode */
+ gpio_set_value_cansleep(rbni->gpio_read, 1);
+
+ /* enable latch */
+ gpio_set_value_cansleep(rbni->gpio_nle, 0);
+
+ /* save registers */
+ oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+ /* set data lines to input mode */
+ __raw_writel(oe_reg | RB91X_NAND_DATA_BITS,
+ base + AR71XX_GPIO_REG_OE);
+
+ for (i = 0; i < len; i++) {
+ u32 in;
+ u8 data;
+
+ /* activate RE line */
+ __raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_CLEAR);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
+
+ /* read input lines */
+ in = __raw_readl(base + AR71XX_GPIO_REG_IN);
+
+ /* deactivate RE line */
+ __raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_SET);
+
+ data = (in & RB91X_NAND_LOW_DATA_MASK);
+ data |= (in >> RB91X_NAND_HIGH_DATA_SHIFT) &
+ RB91X_NAND_HIGH_DATA_MASK;
+
+ read_buf[i] = data;
+ }
+
+ /* restore registers */
+ __raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
+ __raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+ /* disable latch */
+ gpio_set_value_cansleep(rbni->gpio_nle, 1);
+
+ /* disable read mode */
+ gpio_set_value_cansleep(rbni->gpio_read, 0);
+}
+
+static int rb91x_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
+
+ return gpio_get_value_cansleep(rbni->gpio_rdy);
+}
+
+static void rb91x_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ gpio_set_value_cansleep(rbni->gpio_cle,
+ (ctrl & NAND_CLE) ? 1 : 0);
+ gpio_set_value_cansleep(rbni->gpio_ale,
+ (ctrl & NAND_ALE) ? 1 : 0);
+ gpio_set_value_cansleep(rbni->gpio_nce,
+ (ctrl & NAND_NCE) ? 0 : 1);
+ }
+
+ if (cmd != NAND_CMD_NONE) {
+ u8 t = cmd;
+
+ rb91x_nand_write(rbni, &t, 1);
+ }
+}
+
+static u8 rb91x_nand_read_byte(struct mtd_info *mtd)
+{
+ struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
+ u8 data = 0xff;
+
+ rb91x_nand_read(rbni, &data, 1);
+
+ return data;
+}
+
+static void rb91x_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
+
+ rb91x_nand_read(rbni, buf, len);
+}
+
+static void rb91x_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
+
+ rb91x_nand_write(rbni, buf, len);
+}
+
+static int rb91x_nand_gpio_init(struct rb91x_nand_info *info)
+{
+ int ret;
+
+ /*
+ * Ensure that the LATCH is disabled before initializing
+ * control lines.
+ */
+ ret = devm_gpio_request_one(info->dev, info->gpio_nle,
+ GPIOF_OUT_INIT_HIGH, "LATCH enable");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(info->dev, info->gpio_nce,
+ GPIOF_OUT_INIT_HIGH, "NAND nCE");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(info->dev, info->gpio_nrw,
+ GPIOF_OUT_INIT_HIGH, "NAND nRW");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(info->dev, info->gpio_cle,
+ GPIOF_OUT_INIT_LOW, "NAND CLE");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(info->dev, info->gpio_ale,
+ GPIOF_OUT_INIT_LOW, "NAND ALE");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(info->dev, info->gpio_read,
+ GPIOF_OUT_INIT_LOW, "NAND READ");
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request_one(info->dev, info->gpio_rdy,
+ GPIOF_IN, "NAND RDY");
+ return ret;
+}
+
+static int rb91x_nand_probe(struct platform_device *pdev)
+{
+ struct rb91x_nand_info *rbni;
+ struct rb91x_nand_platform_data *pdata;
+ int ret;
+
+ pr_info(DRV_DESC "\n");
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata)
+ return -EINVAL;
+
+ rbni = devm_kzalloc(&pdev->dev, sizeof(*rbni), GFP_KERNEL);
+ if (!rbni)
+ return -ENOMEM;
+
+ rbni->dev = &pdev->dev;
+ rbni->gpio_nce = pdata->gpio_nce;
+ rbni->gpio_ale = pdata->gpio_ale;
+ rbni->gpio_cle = pdata->gpio_cle;
+ rbni->gpio_read = pdata->gpio_read;
+ rbni->gpio_nrw = pdata->gpio_nrw;
+ rbni->gpio_rdy = pdata->gpio_rdy;
+ rbni->gpio_nle = pdata->gpio_nle;
+
+ rbni->chip.priv = &rbni;
+ rbni->mtd.priv = &rbni->chip;
+ rbni->mtd.owner = THIS_MODULE;
+
+ rbni->chip.cmd_ctrl = rb91x_nand_cmd_ctrl;
+ rbni->chip.dev_ready = rb91x_nand_dev_ready;
+ rbni->chip.read_byte = rb91x_nand_read_byte;
+ rbni->chip.write_buf = rb91x_nand_write_buf;
+ rbni->chip.read_buf = rb91x_nand_read_buf;
+
+ rbni->chip.chip_delay = 25;
+ rbni->chip.ecc.mode = NAND_ECC_SOFT;
+
+ platform_set_drvdata(pdev, rbni);
+
+ ret = rb91x_nand_gpio_init(rbni);
+ if (ret)
+ return ret;
+
+ ret = nand_scan_ident(&rbni->mtd, 1, NULL);
+ if (ret)
+ return ret;
+
+ if (rbni->mtd.writesize == 512)
+ rbni->chip.ecc.layout = &rb91x_nand_ecclayout;
+
+ ret = nand_scan_tail(&rbni->mtd);
+ if (ret)
+ return ret;
+
+ ret = mtd_device_register(&rbni->mtd, rb91x_nand_partitions,
+ ARRAY_SIZE(rb91x_nand_partitions));
+ if (ret)
+ goto err_release_nand;
+
+ return 0;
+
+err_release_nand:
+ nand_release(&rbni->mtd);
+ return ret;
+}
+
+static int rb91x_nand_remove(struct platform_device *pdev)
+{
+ struct rb91x_nand_info *info = platform_get_drvdata(pdev);
+
+ nand_release(&info->mtd);
+
+ return 0;
+}
+
+static struct platform_driver rb91x_nand_driver = {
+ .probe = rb91x_nand_probe,
+ .remove = rb91x_nand_remove,
+ .driver = {
+ .name = RB91X_NAND_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(rb91x_nand_driver);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files-3.14/drivers/mtd/tplinkpart.c b/target/linux/ar71xx/files-3.14/drivers/mtd/tplinkpart.c
new file mode 100644
index 0000000..ab952b6
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/mtd/tplinkpart.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2011 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/magic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define TPLINK_NUM_PARTS 5
+#define TPLINK_HEADER_V1 0x01000000
+#define MD5SUM_LEN 16
+
+#define TPLINK_ART_LEN 0x10000
+#define TPLINK_KERNEL_OFFS 0x20000
+
+struct tplink_fw_header {
+ uint32_t version; /* header version */
+ char vendor_name[24];
+ char fw_version[36];
+ uint32_t hw_id; /* hardware id */
+ uint32_t hw_rev; /* hardware revision */
+ uint32_t unk1;
+ uint8_t md5sum1[MD5SUM_LEN];
+ uint32_t unk2;
+ uint8_t md5sum2[MD5SUM_LEN];
+ uint32_t unk3;
+ uint32_t kernel_la; /* kernel load address */
+ uint32_t kernel_ep; /* kernel entry point */
+ uint32_t fw_length; /* total length of the firmware */
+ uint32_t kernel_ofs; /* kernel data offset */
+ uint32_t kernel_len; /* kernel data length */
+ uint32_t rootfs_ofs; /* rootfs data offset */
+ uint32_t rootfs_len; /* rootfs data length */
+ uint32_t boot_ofs; /* bootloader data offset */
+ uint32_t boot_len; /* bootloader data length */
+ uint8_t pad[360];
+} __attribute__ ((packed));
+
+static struct tplink_fw_header *
+tplink_read_header(struct mtd_info *mtd, size_t offset)
+{
+ struct tplink_fw_header *header;
+ size_t header_len;
+ size_t retlen;
+ int ret;
+ u32 t;
+
+ header = vmalloc(sizeof(*header));
+ if (!header)
+ goto err;
+
+ header_len = sizeof(struct tplink_fw_header);
+ ret = mtd_read(mtd, offset, header_len, &retlen,
+ (unsigned char *) header);
+ if (ret)
+ goto err_free_header;
+
+ if (retlen != header_len)
+ goto err_free_header;
+
+ /* sanity checks */
+ t = be32_to_cpu(header->version);
+ if (t != TPLINK_HEADER_V1)
+ goto err_free_header;
+
+ t = be32_to_cpu(header->kernel_ofs);
+ if (t != header_len)
+ goto err_free_header;
+
+ return header;
+
+err_free_header:
+ vfree(header);
+err:
+ return NULL;
+}
+
+static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset)
+{
+ u32 magic;
+ size_t retlen;
+ int ret;
+
+ ret = mtd_read(mtd, offset, sizeof(magic), &retlen,
+ (unsigned char *) &magic);
+ if (ret)
+ return ret;
+
+ if (retlen != sizeof(magic))
+ return -EIO;
+
+ if (le32_to_cpu(magic) != SQUASHFS_MAGIC &&
+ magic != 0x19852003)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int tplink_parse_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct mtd_partition *parts;
+ struct tplink_fw_header *header;
+ int nr_parts;
+ size_t offset;
+ size_t art_offset;
+ size_t rootfs_offset;
+ size_t squashfs_offset;
+ int ret;
+
+ nr_parts = TPLINK_NUM_PARTS;
+ parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL);
+ if (!parts) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ offset = TPLINK_KERNEL_OFFS;
+
+ header = tplink_read_header(master, offset);
+ if (!header) {
+ pr_notice("%s: no TP-Link header found\n", master->name);
+ ret = -ENODEV;
+ goto err_free_parts;
+ }
+
+ squashfs_offset = offset + sizeof(struct tplink_fw_header) +
+ be32_to_cpu(header->kernel_len);
+
+ ret = tplink_check_rootfs_magic(master, squashfs_offset);
+ if (ret == 0)
+ rootfs_offset = squashfs_offset;
+ else
+ rootfs_offset = offset + be32_to_cpu(header->rootfs_ofs);
+
+ art_offset = master->size - TPLINK_ART_LEN;
+
+ parts[0].name = "u-boot";
+ parts[0].offset = 0;
+ parts[0].size = offset;
+ parts[0].mask_flags = MTD_WRITEABLE;
+
+ parts[1].name = "kernel";
+ parts[1].offset = offset;
+ parts[1].size = rootfs_offset - offset;
+
+ parts[2].name = "rootfs";
+ parts[2].offset = rootfs_offset;
+ parts[2].size = art_offset - rootfs_offset;
+
+ parts[3].name = "art";
+ parts[3].offset = art_offset;
+ parts[3].size = TPLINK_ART_LEN;
+ parts[3].mask_flags = MTD_WRITEABLE;
+
+ parts[4].name = "firmware";
+ parts[4].offset = offset;
+ parts[4].size = art_offset - offset;
+
+ vfree(header);
+
+ *pparts = parts;
+ return nr_parts;
+
+err_free_parts:
+ kfree(parts);
+err:
+ *pparts = NULL;
+ return ret;
+}
+
+static struct mtd_part_parser tplink_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = tplink_parse_partitions,
+ .name = "tp-link",
+};
+
+static int __init tplink_parser_init(void)
+{
+ register_mtd_parser(&tplink_parser);
+
+ return 0;
+}
+
+module_init(tplink_parser_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
diff --git a/target/linux/ar71xx/files-3.14/drivers/mtd/wrt160nl_part.c b/target/linux/ar71xx/files-3.14/drivers/mtd/wrt160nl_part.c
new file mode 100644
index 0000000..698bba8
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/mtd/wrt160nl_part.c
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2009 Christian Daniel <***@maintech.de>
+ * Copyright (C) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * TRX flash partition table.
+ * Based on ar7 map by Felix Fietkau <***@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct cybertan_header {
+ char magic[4];
+ u8 res1[4];
+ char fw_date[3];
+ char fw_ver[3];
+ char id[4];
+ char hw_ver;
+ char unused;
+ u8 flags[2];
+ u8 res2[10];
+};
+
+#define TRX_PARTS 6
+#define TRX_MAGIC 0x30524448
+#define TRX_MAX_OFFSET 3
+
+struct trx_header {
+ uint32_t magic; /* "HDR0" */
+ uint32_t len; /* Length of file including header */
+ uint32_t crc32; /* 32-bit CRC from flag_version to end of file */
+ uint32_t flag_version; /* 0:15 flags, 16:31 version */
+ uint32_t offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
+};
+
+#define IH_MAGIC 0x27051956 /* Image Magic Number */
+#define IH_NMLEN 32 /* Image Name Length */
+
+struct uimage_header {
+ uint32_t ih_magic; /* Image Header Magic Number */
+ uint32_t ih_hcrc; /* Image Header CRC Checksum */
+ uint32_t ih_time; /* Image Creation Timestamp */
+ uint32_t ih_size; /* Image Data Size */
+ uint32_t ih_load; /* Data» Load Address */
+ uint32_t ih_ep; /* Entry Point Address */
+ uint32_t ih_dcrc; /* Image Data CRC Checksum */
+ uint8_t ih_os; /* Operating System */
+ uint8_t ih_arch; /* CPU architecture */
+ uint8_t ih_type; /* Image Type */
+ uint8_t ih_comp; /* Compression Type */
+ uint8_t ih_name[IH_NMLEN]; /* Image Name */
+};
+
+struct wrt160nl_header {
+ struct cybertan_header cybertan;
+ struct trx_header trx;
+ struct uimage_header uimage;
+} __attribute__ ((packed));
+
+#define WRT160NL_UBOOT_LEN 0x40000
+#define WRT160NL_ART_LEN 0x10000
+#define WRT160NL_NVRAM_LEN 0x10000
+
+static int wrt160nl_parse_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct wrt160nl_header *header;
+ struct trx_header *theader;
+ struct uimage_header *uheader;
+ struct mtd_partition *trx_parts;
+ size_t retlen;
+ unsigned int kernel_len;
+ unsigned int uboot_len;
+ unsigned int nvram_len;
+ unsigned int art_len;
+ int ret;
+
+ uboot_len = max_t(unsigned int, master->erasesize, WRT160NL_UBOOT_LEN);
+ nvram_len = max_t(unsigned int, master->erasesize, WRT160NL_NVRAM_LEN);
+ art_len = max_t(unsigned int, master->erasesize, WRT160NL_ART_LEN);
+
+ trx_parts = kzalloc(TRX_PARTS * sizeof(struct mtd_partition),
+ GFP_KERNEL);
+ if (!trx_parts) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ header = vmalloc(sizeof(*header));
+ if (!header) {
+ return -ENOMEM;
+ goto free_parts;
+ }
+
+ ret = mtd_read(master, uboot_len, sizeof(*header),
+ &retlen, (void *) header);
+ if (ret)
+ goto free_hdr;
+
+ if (retlen != sizeof(*header)) {
+ ret = -EIO;
+ goto free_hdr;
+ }
+
+ if (strncmp(header->cybertan.magic, "NL16", 4) != 0) {
+ printk(KERN_NOTICE "%s: no WRT160NL signature found\n",
+ master->name);
+ goto free_hdr;
+ }
+
+ theader = &header->trx;
+ if (le32_to_cpu(theader->magic) != TRX_MAGIC) {
+ printk(KERN_NOTICE "%s: no TRX header found\n", master->name);
+ goto free_hdr;
+ }
+
+ uheader = &header->uimage;
+ if (uheader->ih_magic != IH_MAGIC) {
+ printk(KERN_NOTICE "%s: no uImage found\n", master->name);
+ goto free_hdr;
+ }
+
+ kernel_len = le32_to_cpu(theader->offsets[1]) +
+ sizeof(struct cybertan_header);
+
+ trx_parts[0].name = "u-boot";
+ trx_parts[0].offset = 0;
+ trx_parts[0].size = uboot_len;
+ trx_parts[0].mask_flags = MTD_WRITEABLE;
+
+ trx_parts[1].name = "kernel";
+ trx_parts[1].offset = trx_parts[0].offset + trx_parts[0].size;
+ trx_parts[1].size = kernel_len;
+ trx_parts[1].mask_flags = 0;
+
+ trx_parts[2].name = "rootfs";
+ trx_parts[2].offset = trx_parts[1].offset + trx_parts[1].size;
+ trx_parts[2].size = master->size - uboot_len - nvram_len - art_len -
+ trx_parts[1].size;
+ trx_parts[2].mask_flags = 0;
+
+ trx_parts[3].name = "nvram";
+ trx_parts[3].offset = master->size - nvram_len - art_len;
+ trx_parts[3].size = nvram_len;
+ trx_parts[3].mask_flags = MTD_WRITEABLE;
+
+ trx_parts[4].name = "art";
+ trx_parts[4].offset = master->size - art_len;
+ trx_parts[4].size = art_len;
+ trx_parts[4].mask_flags = MTD_WRITEABLE;
+
+ trx_parts[5].name = "firmware";
+ trx_parts[5].offset = uboot_len;
+ trx_parts[5].size = master->size - uboot_len - nvram_len - art_len;
+ trx_parts[5].mask_flags = 0;
+
+ vfree(header);
+
+ *pparts = trx_parts;
+ return TRX_PARTS;
+
+free_hdr:
+ vfree(header);
+free_parts:
+ kfree(trx_parts);
+out:
+ return ret;
+}
+
+static struct mtd_part_parser wrt160nl_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = wrt160nl_parse_partitions,
+ .name = "wrt160nl",
+};
+
+static int __init wrt160nl_parser_init(void)
+{
+ register_mtd_parser(&wrt160nl_parser);
+
+ return 0;
+}
+
+module_init(wrt160nl_parser_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Daniel <***@maintech.de>");
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/dsa/mv88e6063.c b/target/linux/ar71xx/files-3.14/drivers/net/dsa/mv88e6063.c
new file mode 100644
index 0000000..b41eb54
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/dsa/mv88e6063.c
@@ -0,0 +1,294 @@
+/*
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
+ * Copyright (c) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This driver was base on: net/dsa/mv88e6060.c
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+
+#define REG_BASE 0x10
+#define REG_PHY(p) (REG_BASE + (p))
+#define REG_PORT(p) (REG_BASE + 8 + (p))
+#define REG_GLOBAL (REG_BASE + 0x0f)
+#define NUM_PORTS 7
+
+static int reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+ return mdiobus_read(ds->master_mii_bus, addr, reg);
+}
+
+#define REG_READ(addr, reg) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_read(ds, addr, reg); \
+ if (__ret < 0) \
+ return __ret; \
+ __ret; \
+ })
+
+
+static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ return mdiobus_write(ds->master_mii_bus, addr, reg, val);
+}
+
+#define REG_WRITE(addr, reg, val) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_write(ds, addr, reg, val); \
+ if (__ret < 0) \
+ return __ret; \
+ })
+
+static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
+{
+ int ret;
+
+ ret = mdiobus_read(bus, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ ret &= 0xfff0;
+ if (ret == 0x1530)
+ return "Marvell 88E6063";
+ }
+
+ return NULL;
+}
+
+static int mv88e6063_switch_reset(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ /*
+ * Set all ports to the disabled state.
+ */
+ for (i = 0; i < NUM_PORTS; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /*
+ * Wait for transmit queues to drain.
+ */
+ msleep(2);
+
+ /*
+ * Reset the switch.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+
+ /*
+ * Wait up to one second for reset to complete.
+ */
+ for (i = 0; i < 1000; i++) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0x8000) == 0x0000)
+ break;
+
+ msleep(1);
+ }
+ if (i == 1000)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6063_setup_global(struct dsa_switch *ds)
+{
+ /*
+ * Disable discarding of frames with excessive collisions,
+ * set the maximum frame size to 1536 bytes, and mask all
+ * interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+
+ /*
+ * Enable automatic address learning, set the address
+ * database size to 1024 entries, and set the default aging
+ * time to 5 minutes.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+
+ return 0;
+}
+
+static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+
+ /*
+ * Do not force flow control, disable Ingress and Egress
+ * Header tagging, disable VLAN tunneling, and set the port
+ * state to Forwarding. Additionally, if this is the CPU
+ * port, enable Ingress and Egress Trailer tagging mode.
+ */
+ REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
+
+ /*
+ * Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the CPU port.
+ */
+ REG_WRITE(addr, 0x06,
+ ((p & 0xf) << 12) |
+ (dsa_is_cpu_port(ds, p) ?
+ ds->phys_port_mask :
+ (1 << ds->dst->cpu_port)));
+
+ /*
+ * Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ return 0;
+}
+
+static int mv88e6063_setup(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ ret = mv88e6063_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise atu */
+
+ ret = mv88e6063_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < NUM_PORTS; i++) {
+ ret = mv88e6063_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+ REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+ REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+ return 0;
+}
+
+static int mv88e6063_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port <= NUM_PORTS)
+ return REG_PHY(port);
+ return -1;
+}
+
+static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr;
+
+ addr = mv88e6063_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_read(ds, addr, regnum);
+}
+
+static int
+mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+ int addr;
+
+ addr = mv88e6063_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_write(ds, addr, regnum, val);
+}
+
+static void mv88e6063_poll_link(struct dsa_switch *ds)
+{
+ int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ struct net_device *dev;
+ int uninitialized_var(port_status);
+ int link;
+ int speed;
+ int duplex;
+ int fc;
+
+ dev = ds->ports[i];
+ if (dev == NULL)
+ continue;
+
+ link = 0;
+ if (dev->flags & IFF_UP) {
+ port_status = reg_read(ds, REG_PORT(i), 0x00);
+ if (port_status < 0)
+ continue;
+
+ link = !!(port_status & 0x1000);
+ }
+
+ if (!link) {
+ if (netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+ continue;
+ }
+
+ speed = (port_status & 0x0100) ? 100 : 10;
+ duplex = (port_status & 0x0200) ? 1 : 0;
+ fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
+
+ if (!netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+ "flow control %sabled\n", dev->name,
+ speed, duplex ? "full" : "half",
+ fc ? "en" : "dis");
+ netif_carrier_on(dev);
+ }
+ }
+}
+
+static struct dsa_switch_driver mv88e6063_switch_driver = {
+ .tag_protocol = htons(ETH_P_TRAILER),
+ .probe = mv88e6063_probe,
+ .setup = mv88e6063_setup,
+ .set_addr = mv88e6063_set_addr,
+ .phy_read = mv88e6063_phy_read,
+ .phy_write = mv88e6063_phy_write,
+ .poll_link = mv88e6063_poll_link,
+};
+
+static int __init mv88e6063_init(void)
+{
+ register_switch_driver(&mv88e6063_switch_driver);
+ return 0;
+}
+module_init(mv88e6063_init);
+
+static void __exit mv88e6063_cleanup(void)
+{
+ unregister_switch_driver(&mv88e6063_switch_driver);
+}
+module_exit(mv88e6063_cleanup);
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Kconfig b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Kconfig
new file mode 100644
index 0000000..42d544f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Kconfig
@@ -0,0 +1,33 @@
+config AG71XX
+ tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
+ depends on ATH79
+ select PHYLIB
+ help
+ If you wish to compile a kernel for AR7XXX/91XXX and enable
+ ethernet support, then you should always answer Y to this.
+
+if AG71XX
+
+config AG71XX_DEBUG
+ bool "Atheros AR71xx built-in ethernet driver debugging"
+ default n
+ help
+ Atheros AR71xx built-in ethernet driver debugging messages.
+
+config AG71XX_DEBUG_FS
+ bool "Atheros AR71xx built-in ethernet driver debugfs support"
+ depends on DEBUG_FS
+ default n
+ help
+ Say Y, if you need access to various statistics provided by
+ the ag71xx driver.
+
+config AG71XX_AR8216_SUPPORT
+ bool "special support for the Atheros AR8216 switch"
+ default n
+ default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU
+ help
+ Say 'y' here if you want to enable special support for the
+ Atheros AR8216 switch found on some boards.
+
+endif
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Makefile b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Makefile
new file mode 100644
index 0000000..b3ec408
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the Atheros AR71xx built-in ethernet macs
+#
+
+ag71xx-y += ag71xx_main.o
+ag71xx-y += ag71xx_ethtool.o
+ag71xx-y += ag71xx_phy.o
+ag71xx-y += ag71xx_mdio.o
+ag71xx-y += ag71xx_ar7240.o
+
+ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o
+ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o
+
+obj-$(CONFIG_AG71XX) += ag71xx.o
+
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx.h b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx.h
new file mode 100644
index 0000000..f6d85b9
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx.h
@@ -0,0 +1,476 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __AG71XX_H
+#define __AG71XX_H
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/random.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/phy.h>
+#include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+
+#include <linux/bitops.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ag71xx_platform.h>
+
+#define AG71XX_DRV_NAME "ag71xx"
+#define AG71XX_DRV_VERSION "0.5.35"
+
+#define AG71XX_NAPI_WEIGHT 64
+#define AG71XX_OOM_REFILL (1 + HZ/10)
+
+#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
+#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
+#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
+
+#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
+#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
+
+#define AG71XX_TX_MTU_LEN 1540
+
+#define AG71XX_TX_RING_SIZE_DEFAULT 32
+#define AG71XX_RX_RING_SIZE_DEFAULT 128
+
+#define AG71XX_TX_RING_SIZE_MAX 32
+#define AG71XX_RX_RING_SIZE_MAX 128
+
+#ifdef CONFIG_AG71XX_DEBUG
+#define DBG(fmt, args...) pr_debug(fmt, ## args)
+#else
+#define DBG(fmt, args...) do {} while (0)
+#endif
+
+#define ag71xx_assert(_cond) \
+do { \
+ if (_cond) \
+ break; \
+ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \
+ BUG(); \
+} while (0)
+
+struct ag71xx_desc {
+ u32 data;
+ u32 ctrl;
+#define DESC_EMPTY BIT(31)
+#define DESC_MORE BIT(24)
+#define DESC_PKTLEN_M 0xfff
+ u32 next;
+ u32 pad;
+} __attribute__((aligned(4)));
+
+struct ag71xx_buf {
+ union {
+ struct sk_buff *skb;
+ void *rx_buf;
+ };
+ struct ag71xx_desc *desc;
+ union {
+ dma_addr_t dma_addr;
+ unsigned long timestamp;
+ };
+ unsigned int len;
+};
+
+struct ag71xx_ring {
+ struct ag71xx_buf *buf;
+ u8 *descs_cpu;
+ dma_addr_t descs_dma;
+ unsigned int desc_size;
+ unsigned int curr;
+ unsigned int dirty;
+ unsigned int size;
+};
+
+struct ag71xx_mdio {
+ struct mii_bus *mii_bus;
+ int mii_irq[PHY_MAX_ADDR];
+ void __iomem *mdio_base;
+ struct ag71xx_mdio_platform_data *pdata;
+};
+
+struct ag71xx_int_stats {
+ unsigned long rx_pr;
+ unsigned long rx_be;
+ unsigned long rx_of;
+ unsigned long tx_ps;
+ unsigned long tx_be;
+ unsigned long tx_ur;
+ unsigned long total;
+};
+
+struct ag71xx_napi_stats {
+ unsigned long napi_calls;
+ unsigned long rx_count;
+ unsigned long rx_packets;
+ unsigned long rx_packets_max;
+ unsigned long tx_count;
+ unsigned long tx_packets;
+ unsigned long tx_packets_max;
+
+ unsigned long rx[AG71XX_NAPI_WEIGHT + 1];
+ unsigned long tx[AG71XX_NAPI_WEIGHT + 1];
+};
+
+struct ag71xx_debug {
+ struct dentry *debugfs_dir;
+
+ struct ag71xx_int_stats int_stats;
+ struct ag71xx_napi_stats napi_stats;
+};
+
+struct ag71xx {
+ void __iomem *mac_base;
+
+ spinlock_t lock;
+ struct platform_device *pdev;
+ struct net_device *dev;
+ struct napi_struct napi;
+ u32 msg_enable;
+
+ struct ag71xx_desc *stop_desc;
+ dma_addr_t stop_desc_dma;
+
+ struct ag71xx_ring rx_ring;
+ struct ag71xx_ring tx_ring;
+
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ void *phy_priv;
+
+ unsigned int link;
+ unsigned int speed;
+ int duplex;
+
+ unsigned int max_frame_len;
+ unsigned int desc_pktlen_mask;
+ unsigned int rx_buf_size;
+
+ struct work_struct restart_work;
+ struct delayed_work link_work;
+ struct timer_list oom_timer;
+
+#ifdef CONFIG_AG71XX_DEBUG_FS
+ struct ag71xx_debug debug;
+#endif
+};
+
+extern struct ethtool_ops ag71xx_ethtool_ops;
+void ag71xx_link_adjust(struct ag71xx *ag);
+
+int ag71xx_mdio_driver_init(void) __init;
+void ag71xx_mdio_driver_exit(void);
+
+int ag71xx_phy_connect(struct ag71xx *ag);
+void ag71xx_phy_disconnect(struct ag71xx *ag);
+void ag71xx_phy_start(struct ag71xx *ag);
+void ag71xx_phy_stop(struct ag71xx *ag);
+
+static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
+{
+ return ag->pdev->dev.platform_data;
+}
+
+static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
+{
+ return (desc->ctrl & DESC_EMPTY) != 0;
+}
+
+/* Register offsets */
+#define AG71XX_REG_MAC_CFG1 0x0000
+#define AG71XX_REG_MAC_CFG2 0x0004
+#define AG71XX_REG_MAC_IPG 0x0008
+#define AG71XX_REG_MAC_HDX 0x000c
+#define AG71XX_REG_MAC_MFL 0x0010
+#define AG71XX_REG_MII_CFG 0x0020
+#define AG71XX_REG_MII_CMD 0x0024
+#define AG71XX_REG_MII_ADDR 0x0028
+#define AG71XX_REG_MII_CTRL 0x002c
+#define AG71XX_REG_MII_STATUS 0x0030
+#define AG71XX_REG_MII_IND 0x0034
+#define AG71XX_REG_MAC_IFCTL 0x0038
+#define AG71XX_REG_MAC_ADDR1 0x0040
+#define AG71XX_REG_MAC_ADDR2 0x0044
+#define AG71XX_REG_FIFO_CFG0 0x0048
+#define AG71XX_REG_FIFO_CFG1 0x004c
+#define AG71XX_REG_FIFO_CFG2 0x0050
+#define AG71XX_REG_FIFO_CFG3 0x0054
+#define AG71XX_REG_FIFO_CFG4 0x0058
+#define AG71XX_REG_FIFO_CFG5 0x005c
+#define AG71XX_REG_FIFO_RAM0 0x0060
+#define AG71XX_REG_FIFO_RAM1 0x0064
+#define AG71XX_REG_FIFO_RAM2 0x0068
+#define AG71XX_REG_FIFO_RAM3 0x006c
+#define AG71XX_REG_FIFO_RAM4 0x0070
+#define AG71XX_REG_FIFO_RAM5 0x0074
+#define AG71XX_REG_FIFO_RAM6 0x0078
+#define AG71XX_REG_FIFO_RAM7 0x007c
+
+#define AG71XX_REG_TX_CTRL 0x0180
+#define AG71XX_REG_TX_DESC 0x0184
+#define AG71XX_REG_TX_STATUS 0x0188
+#define AG71XX_REG_RX_CTRL 0x018c
+#define AG71XX_REG_RX_DESC 0x0190
+#define AG71XX_REG_RX_STATUS 0x0194
+#define AG71XX_REG_INT_ENABLE 0x0198
+#define AG71XX_REG_INT_STATUS 0x019c
+
+#define AG71XX_REG_FIFO_DEPTH 0x01a8
+#define AG71XX_REG_RX_SM 0x01b0
+#define AG71XX_REG_TX_SM 0x01b4
+
+#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
+#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
+#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
+#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
+#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
+#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
+#define MAC_CFG1_LB BIT(8) /* Loopback mode */
+#define MAC_CFG1_SR BIT(31) /* Soft Reset */
+
+#define MAC_CFG2_FDX BIT(0)
+#define MAC_CFG2_CRC_EN BIT(1)
+#define MAC_CFG2_PAD_CRC_EN BIT(2)
+#define MAC_CFG2_LEN_CHECK BIT(4)
+#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
+#define MAC_CFG2_IF_1000 BIT(9)
+#define MAC_CFG2_IF_10_100 BIT(8)
+
+#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
+#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
+#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
+#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
+#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
+#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
+ | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
+
+#define FIFO_CFG0_ENABLE_SHIFT 8
+
+#define FIFO_CFG4_DE BIT(0) /* Drop Event */
+#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
+#define FIFO_CFG4_FC BIT(2) /* False Carrier */
+#define FIFO_CFG4_CE BIT(3) /* Code Error */
+#define FIFO_CFG4_CR BIT(4) /* CRC error */
+#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
+#define FIFO_CFG4_LO BIT(6) /* Length out of range */
+#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
+#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
+#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
+#define FIFO_CFG4_DR BIT(10) /* Dribble */
+#define FIFO_CFG4_LE BIT(11) /* Long Event */
+#define FIFO_CFG4_CF BIT(12) /* Control Frame */
+#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
+#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
+#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
+#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
+#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
+
+#define FIFO_CFG5_DE BIT(0) /* Drop Event */
+#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
+#define FIFO_CFG5_FC BIT(2) /* False Carrier */
+#define FIFO_CFG5_CE BIT(3) /* Code Error */
+#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
+#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
+#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
+#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
+#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
+#define FIFO_CFG5_DR BIT(9) /* Dribble */
+#define FIFO_CFG5_CF BIT(10) /* Control Frame */
+#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
+#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
+#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
+#define FIFO_CFG5_LE BIT(14) /* Long Event */
+#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
+#define FIFO_CFG5_16 BIT(16) /* unknown */
+#define FIFO_CFG5_17 BIT(17) /* unknown */
+#define FIFO_CFG5_SF BIT(18) /* Short Frame */
+#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
+
+#define AG71XX_INT_TX_PS BIT(0)
+#define AG71XX_INT_TX_UR BIT(1)
+#define AG71XX_INT_TX_BE BIT(3)
+#define AG71XX_INT_RX_PR BIT(4)
+#define AG71XX_INT_RX_OF BIT(6)
+#define AG71XX_INT_RX_BE BIT(7)
+
+#define MAC_IFCTL_SPEED BIT(16)
+
+#define MII_CFG_CLK_DIV_4 0
+#define MII_CFG_CLK_DIV_6 2
+#define MII_CFG_CLK_DIV_8 3
+#define MII_CFG_CLK_DIV_10 4
+#define MII_CFG_CLK_DIV_14 5
+#define MII_CFG_CLK_DIV_20 6
+#define MII_CFG_CLK_DIV_28 7
+#define MII_CFG_CLK_DIV_34 8
+#define MII_CFG_CLK_DIV_42 9
+#define MII_CFG_CLK_DIV_50 10
+#define MII_CFG_CLK_DIV_58 11
+#define MII_CFG_CLK_DIV_66 12
+#define MII_CFG_CLK_DIV_74 13
+#define MII_CFG_CLK_DIV_82 14
+#define MII_CFG_CLK_DIV_98 15
+#define MII_CFG_RESET BIT(31)
+
+#define MII_CMD_WRITE 0x0
+#define MII_CMD_READ 0x1
+#define MII_ADDR_SHIFT 8
+#define MII_IND_BUSY BIT(0)
+#define MII_IND_INVALID BIT(2)
+
+#define TX_CTRL_TXE BIT(0) /* Tx Enable */
+
+#define TX_STATUS_PS BIT(0) /* Packet Sent */
+#define TX_STATUS_UR BIT(1) /* Tx Underrun */
+#define TX_STATUS_BE BIT(3) /* Bus Error */
+
+#define RX_CTRL_RXE BIT(0) /* Rx Enable */
+
+#define RX_STATUS_PR BIT(0) /* Packet Received */
+#define RX_STATUS_OF BIT(2) /* Rx Overflow */
+#define RX_STATUS_BE BIT(3) /* Bus Error */
+
+static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg)
+{
+ switch (reg) {
+ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
+ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM:
+ case AG71XX_REG_MII_CFG:
+ break;
+
+ default:
+ BUG();
+ }
+}
+
+static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
+{
+ ag71xx_check_reg_offset(ag, reg);
+
+ __raw_writel(value, ag->mac_base + reg);
+ /* flush write */
+ (void) __raw_readl(ag->mac_base + reg);
+}
+
+static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
+{
+ ag71xx_check_reg_offset(ag, reg);
+
+ return __raw_readl(ag->mac_base + reg);
+}
+
+static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
+{
+ void __iomem *r;
+
+ ag71xx_check_reg_offset(ag, reg);
+
+ r = ag->mac_base + reg;
+ __raw_writel(__raw_readl(r) | mask, r);
+ /* flush write */
+ (void)__raw_readl(r);
+}
+
+static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
+{
+ void __iomem *r;
+
+ ag71xx_check_reg_offset(ag, reg);
+
+ r = ag->mac_base + reg;
+ __raw_writel(__raw_readl(r) & ~mask, r);
+ /* flush write */
+ (void) __raw_readl(r);
+}
+
+static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
+{
+ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
+}
+
+static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
+{
+ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
+}
+
+#ifdef CONFIG_AG71XX_AR8216_SUPPORT
+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
+ int pktlen);
+static inline int ag71xx_has_ar8216(struct ag71xx *ag)
+{
+ return ag71xx_get_pdata(ag)->has_ar8216;
+}
+#else
+static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
+ struct sk_buff *skb)
+{
+}
+
+static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
+ struct sk_buff *skb,
+ int pktlen)
+{
+ return 0;
+}
+static inline int ag71xx_has_ar8216(struct ag71xx *ag)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_AG71XX_DEBUG_FS
+int ag71xx_debugfs_root_init(void);
+void ag71xx_debugfs_root_exit(void);
+int ag71xx_debugfs_init(struct ag71xx *ag);
+void ag71xx_debugfs_exit(struct ag71xx *ag);
+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
+#else
+static inline int ag71xx_debugfs_root_init(void) { return 0; }
+static inline void ag71xx_debugfs_root_exit(void) {}
+static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
+static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
+static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
+ u32 status) {}
+static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
+ int rx, int tx) {}
+#endif /* CONFIG_AG71XX_DEBUG_FS */
+
+void ag71xx_ar7240_start(struct ag71xx *ag);
+void ag71xx_ar7240_stop(struct ag71xx *ag);
+int ag71xx_ar7240_init(struct ag71xx *ag);
+void ag71xx_ar7240_cleanup(struct ag71xx *ag);
+
+int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg);
+void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val);
+
+u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr);
+int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr, u16 reg_val);
+
+#endif /* _AG71XX_H */
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
new file mode 100644
index 0000000..d4ccc02
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
@@ -0,0 +1,1202 @@
+/*
+ * Driver for the built-in ethernet switch of the Atheros AR7240 SoC
+ * Copyright (c) 2010 Gabor Juhos <***@openwrt.org>
+ * Copyright (c) 2010 Felix Fietkau <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/mii.h>
+#include <linux/bitops.h>
+#include <linux/switch.h>
+#include "ag71xx.h"
+
+#define BITM(_count) (BIT(_count) - 1)
+#define BITS(_shift, _count) (BITM(_count) << _shift)
+
+#define AR7240_REG_MASK_CTRL 0x00
+#define AR7240_MASK_CTRL_REVISION_M BITM(8)
+#define AR7240_MASK_CTRL_VERSION_M BITM(8)
+#define AR7240_MASK_CTRL_VERSION_S 8
+#define AR7240_MASK_CTRL_VERSION_AR7240 0x01
+#define AR7240_MASK_CTRL_VERSION_AR934X 0x02
+#define AR7240_MASK_CTRL_SOFT_RESET BIT(31)
+
+#define AR7240_REG_MAC_ADDR0 0x20
+#define AR7240_REG_MAC_ADDR1 0x24
+
+#define AR7240_REG_FLOOD_MASK 0x2c
+#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26)
+
+#define AR7240_REG_GLOBAL_CTRL 0x30
+#define AR7240_GLOBAL_CTRL_MTU_M BITM(11)
+#define AR9340_GLOBAL_CTRL_MTU_M BITM(14)
+
+#define AR7240_REG_VTU 0x0040
+#define AR7240_VTU_OP BITM(3)
+#define AR7240_VTU_OP_NOOP 0x0
+#define AR7240_VTU_OP_FLUSH 0x1
+#define AR7240_VTU_OP_LOAD 0x2
+#define AR7240_VTU_OP_PURGE 0x3
+#define AR7240_VTU_OP_REMOVE_PORT 0x4
+#define AR7240_VTU_ACTIVE BIT(3)
+#define AR7240_VTU_FULL BIT(4)
+#define AR7240_VTU_PORT BITS(8, 4)
+#define AR7240_VTU_PORT_S 8
+#define AR7240_VTU_VID BITS(16, 12)
+#define AR7240_VTU_VID_S 16
+#define AR7240_VTU_PRIO BITS(28, 3)
+#define AR7240_VTU_PRIO_S 28
+#define AR7240_VTU_PRIO_EN BIT(31)
+
+#define AR7240_REG_VTU_DATA 0x0044
+#define AR7240_VTUDATA_MEMBER BITS(0, 10)
+#define AR7240_VTUDATA_VALID BIT(11)
+
+#define AR7240_REG_ATU 0x50
+#define AR7240_ATU_FLUSH_ALL 0x1
+
+#define AR7240_REG_AT_CTRL 0x5c
+#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15)
+#define AR7240_AT_CTRL_AGE_EN BIT(17)
+#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18)
+#define AR7240_AT_CTRL_RESERVED BIT(19)
+#define AR7240_AT_CTRL_ARP_EN BIT(20)
+
+#define AR7240_REG_TAG_PRIORITY 0x70
+
+#define AR7240_REG_SERVICE_TAG 0x74
+#define AR7240_SERVICE_TAG_M BITM(16)
+
+#define AR7240_REG_CPU_PORT 0x78
+#define AR7240_MIRROR_PORT_S 4
+#define AR7240_CPU_PORT_EN BIT(8)
+
+#define AR7240_REG_MIB_FUNCTION0 0x80
+#define AR7240_MIB_TIMER_M BITM(16)
+#define AR7240_MIB_AT_HALF_EN BIT(16)
+#define AR7240_MIB_BUSY BIT(17)
+#define AR7240_MIB_FUNC_S 24
+#define AR7240_MIB_FUNC_M BITM(3)
+#define AR7240_MIB_FUNC_NO_OP 0x0
+#define AR7240_MIB_FUNC_FLUSH 0x1
+#define AR7240_MIB_FUNC_CAPTURE 0x3
+
+#define AR7240_REG_MDIO_CTRL 0x98
+#define AR7240_MDIO_CTRL_DATA_M BITM(16)
+#define AR7240_MDIO_CTRL_REG_ADDR_S 16
+#define AR7240_MDIO_CTRL_PHY_ADDR_S 21
+#define AR7240_MDIO_CTRL_CMD_WRITE 0
+#define AR7240_MDIO_CTRL_CMD_READ BIT(27)
+#define AR7240_MDIO_CTRL_MASTER_EN BIT(30)
+#define AR7240_MDIO_CTRL_BUSY BIT(31)
+
+#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
+
+#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00)
+#define AR7240_PORT_STATUS_SPEED_S 0
+#define AR7240_PORT_STATUS_SPEED_M BITM(2)
+#define AR7240_PORT_STATUS_SPEED_10 0
+#define AR7240_PORT_STATUS_SPEED_100 1
+#define AR7240_PORT_STATUS_SPEED_1000 2
+#define AR7240_PORT_STATUS_TXMAC BIT(2)
+#define AR7240_PORT_STATUS_RXMAC BIT(3)
+#define AR7240_PORT_STATUS_TXFLOW BIT(4)
+#define AR7240_PORT_STATUS_RXFLOW BIT(5)
+#define AR7240_PORT_STATUS_DUPLEX BIT(6)
+#define AR7240_PORT_STATUS_LINK_UP BIT(8)
+#define AR7240_PORT_STATUS_LINK_AUTO BIT(9)
+#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10)
+
+#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04)
+#define AR7240_PORT_CTRL_STATE_M BITM(3)
+#define AR7240_PORT_CTRL_STATE_DISABLED 0
+#define AR7240_PORT_CTRL_STATE_BLOCK 1
+#define AR7240_PORT_CTRL_STATE_LISTEN 2
+#define AR7240_PORT_CTRL_STATE_LEARN 3
+#define AR7240_PORT_CTRL_STATE_FORWARD 4
+#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7)
+#define AR7240_PORT_CTRL_VLAN_MODE_S 8
+#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0
+#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
+#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2
+#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
+#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10)
+#define AR7240_PORT_CTRL_HEADER BIT(11)
+#define AR7240_PORT_CTRL_MAC_LOOP BIT(12)
+#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13)
+#define AR7240_PORT_CTRL_LEARN BIT(14)
+#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15)
+#define AR7240_PORT_CTRL_MIRROR_TX BIT(16)
+#define AR7240_PORT_CTRL_MIRROR_RX BIT(17)
+
+#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08)
+
+#define AR7240_PORT_VLAN_DEFAULT_ID_S 0
+#define AR7240_PORT_VLAN_DEST_PORTS_S 16
+#define AR7240_PORT_VLAN_MODE_S 30
+#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0
+#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1
+#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2
+#define AR7240_PORT_VLAN_MODE_SECURE 3
+
+
+#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100)
+
+#define AR7240_STATS_RXBROAD 0x00
+#define AR7240_STATS_RXPAUSE 0x04
+#define AR7240_STATS_RXMULTI 0x08
+#define AR7240_STATS_RXFCSERR 0x0c
+#define AR7240_STATS_RXALIGNERR 0x10
+#define AR7240_STATS_RXRUNT 0x14
+#define AR7240_STATS_RXFRAGMENT 0x18
+#define AR7240_STATS_RX64BYTE 0x1c
+#define AR7240_STATS_RX128BYTE 0x20
+#define AR7240_STATS_RX256BYTE 0x24
+#define AR7240_STATS_RX512BYTE 0x28
+#define AR7240_STATS_RX1024BYTE 0x2c
+#define AR7240_STATS_RX1518BYTE 0x30
+#define AR7240_STATS_RXMAXBYTE 0x34
+#define AR7240_STATS_RXTOOLONG 0x38
+#define AR7240_STATS_RXGOODBYTE 0x3c
+#define AR7240_STATS_RXBADBYTE 0x44
+#define AR7240_STATS_RXOVERFLOW 0x4c
+#define AR7240_STATS_FILTERED 0x50
+#define AR7240_STATS_TXBROAD 0x54
+#define AR7240_STATS_TXPAUSE 0x58
+#define AR7240_STATS_TXMULTI 0x5c
+#define AR7240_STATS_TXUNDERRUN 0x60
+#define AR7240_STATS_TX64BYTE 0x64
+#define AR7240_STATS_TX128BYTE 0x68
+#define AR7240_STATS_TX256BYTE 0x6c
+#define AR7240_STATS_TX512BYTE 0x70
+#define AR7240_STATS_TX1024BYTE 0x74
+#define AR7240_STATS_TX1518BYTE 0x78
+#define AR7240_STATS_TXMAXBYTE 0x7c
+#define AR7240_STATS_TXOVERSIZE 0x80
+#define AR7240_STATS_TXBYTE 0x84
+#define AR7240_STATS_TXCOLLISION 0x8c
+#define AR7240_STATS_TXABORTCOL 0x90
+#define AR7240_STATS_TXMULTICOL 0x94
+#define AR7240_STATS_TXSINGLECOL 0x98
+#define AR7240_STATS_TXEXCDEFER 0x9c
+#define AR7240_STATS_TXDEFER 0xa0
+#define AR7240_STATS_TXLATECOL 0xa4
+
+#define AR7240_PORT_CPU 0
+#define AR7240_NUM_PORTS 6
+#define AR7240_NUM_PHYS 5
+
+#define AR7240_PHY_ID1 0x004d
+#define AR7240_PHY_ID2 0xd041
+
+#define AR934X_PHY_ID1 0x004d
+#define AR934X_PHY_ID2 0xd042
+
+#define AR7240_MAX_VLANS 16
+
+#define AR934X_REG_OPER_MODE0 0x04
+#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6)
+#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10)
+
+#define AR934X_REG_OPER_MODE1 0x08
+#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28)
+
+#define AR934X_REG_FLOOD_MASK 0x2c
+#define AR934X_FLOOD_MASK_MC_DP(_p) BIT(16 + (_p))
+#define AR934X_FLOOD_MASK_BC_DP(_p) BIT(25 + (_p))
+
+#define AR934X_REG_QM_CTRL 0x3c
+#define AR934X_QM_CTRL_ARP_EN BIT(15)
+
+#define AR934X_REG_AT_CTRL 0x5c
+#define AR934X_AT_CTRL_AGE_TIME BITS(0, 15)
+#define AR934X_AT_CTRL_AGE_EN BIT(17)
+#define AR934X_AT_CTRL_LEARN_CHANGE BIT(18)
+
+#define AR934X_MIB_ENABLE BIT(30)
+
+#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
+
+#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08)
+#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0
+#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12)
+#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13)
+#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14)
+#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15)
+#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16
+#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28)
+#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29
+
+#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c)
+#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16
+#define AR934X_PORT_VLAN2_8021Q_MODE_S 30
+#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0
+#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1
+#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2
+#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3
+
+#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev)
+
+struct ar7240sw_port_stat {
+ unsigned long rx_broadcast;
+ unsigned long rx_pause;
+ unsigned long rx_multicast;
+ unsigned long rx_fcs_error;
+ unsigned long rx_align_error;
+ unsigned long rx_runt;
+ unsigned long rx_fragments;
+ unsigned long rx_64byte;
+ unsigned long rx_128byte;
+ unsigned long rx_256byte;
+ unsigned long rx_512byte;
+ unsigned long rx_1024byte;
+ unsigned long rx_1518byte;
+ unsigned long rx_maxbyte;
+ unsigned long rx_toolong;
+ unsigned long rx_good_byte;
+ unsigned long rx_bad_byte;
+ unsigned long rx_overflow;
+ unsigned long filtered;
+
+ unsigned long tx_broadcast;
+ unsigned long tx_pause;
+ unsigned long tx_multicast;
+ unsigned long tx_underrun;
+ unsigned long tx_64byte;
+ unsigned long tx_128byte;
+ unsigned long tx_256byte;
+ unsigned long tx_512byte;
+ unsigned long tx_1024byte;
+ unsigned long tx_1518byte;
+ unsigned long tx_maxbyte;
+ unsigned long tx_oversize;
+ unsigned long tx_byte;
+ unsigned long tx_collision;
+ unsigned long tx_abortcol;
+ unsigned long tx_multicol;
+ unsigned long tx_singlecol;
+ unsigned long tx_excdefer;
+ unsigned long tx_defer;
+ unsigned long tx_xlatecol;
+};
+
+struct ar7240sw {
+ struct mii_bus *mii_bus;
+ struct ag71xx_switch_platform_data *swdata;
+ struct switch_dev swdev;
+ int num_ports;
+ u8 ver;
+ bool vlan;
+ u16 vlan_id[AR7240_MAX_VLANS];
+ u8 vlan_table[AR7240_MAX_VLANS];
+ u8 vlan_tagged;
+ u16 pvid[AR7240_NUM_PORTS];
+ char buf[80];
+
+ rwlock_t stats_lock;
+ struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS];
+};
+
+struct ar7240sw_hw_stat {
+ char string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int reg;
+};
+
+static DEFINE_MUTEX(reg_mutex);
+
+static inline int sw_is_ar7240(struct ar7240sw *as)
+{
+ return as->ver == AR7240_MASK_CTRL_VERSION_AR7240;
+}
+
+static inline int sw_is_ar934x(struct ar7240sw *as)
+{
+ return as->ver == AR7240_MASK_CTRL_VERSION_AR934X;
+}
+
+static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port)
+{
+ return BIT(port);
+}
+
+static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as)
+{
+ return BIT(as->swdev.ports) - 1;
+}
+
+static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port)
+{
+ return ar7240sw_port_mask_all(as) & ~BIT(port);
+}
+
+static inline u16 mk_phy_addr(u32 reg)
+{
+ return 0x17 & ((reg >> 4) | 0x10);
+}
+
+static inline u16 mk_phy_reg(u32 reg)
+{
+ return (reg << 1) & 0x1e;
+}
+
+static inline u16 mk_high_addr(u32 reg)
+{
+ return (reg >> 7) & 0x1ff;
+}
+
+static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg)
+{
+ unsigned long flags;
+ u16 phy_addr;
+ u16 phy_reg;
+ u32 hi, lo;
+
+ reg = (reg & 0xfffffffc) >> 2;
+ phy_addr = mk_phy_addr(reg);
+ phy_reg = mk_phy_reg(reg);
+
+ local_irq_save(flags);
+ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
+ lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg);
+ hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1);
+ local_irq_restore(flags);
+
+ return (hi << 16) | lo;
+}
+
+static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val)
+{
+ unsigned long flags;
+ u16 phy_addr;
+ u16 phy_reg;
+
+ reg = (reg & 0xfffffffc) >> 2;
+ phy_addr = mk_phy_addr(reg);
+ phy_reg = mk_phy_reg(reg);
+
+ local_irq_save(flags);
+ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
+ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16));
+ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff));
+ local_irq_restore(flags);
+}
+
+static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr)
+{
+ u32 ret;
+
+ mutex_lock(&reg_mutex);
+ ret = __ar7240sw_reg_read(mii, reg_addr);
+ mutex_unlock(&reg_mutex);
+
+ return ret;
+}
+
+static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val)
+{
+ mutex_lock(&reg_mutex);
+ __ar7240sw_reg_write(mii, reg_addr, reg_val);
+ mutex_unlock(&reg_mutex);
+}
+
+static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val)
+{
+ u32 t;
+
+ mutex_lock(&reg_mutex);
+ t = __ar7240sw_reg_read(mii, reg);
+ t &= ~mask;
+ t |= val;
+ __ar7240sw_reg_write(mii, reg, t);
+ mutex_unlock(&reg_mutex);
+
+ return t;
+}
+
+static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val)
+{
+ u32 t;
+
+ mutex_lock(&reg_mutex);
+ t = __ar7240sw_reg_read(mii, reg);
+ t |= val;
+ __ar7240sw_reg_write(mii, reg, t);
+ mutex_unlock(&reg_mutex);
+}
+
+static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
+ unsigned timeout)
+{
+ int i;
+
+ for (i = 0; i < timeout; i++) {
+ u32 t;
+
+ t = __ar7240sw_reg_read(mii, reg);
+ if ((t & mask) == val)
+ return 0;
+
+ msleep(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
+ unsigned timeout)
+{
+ int ret;
+
+ mutex_lock(&reg_mutex);
+ ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout);
+ mutex_unlock(&reg_mutex);
+ return ret;
+}
+
+u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr)
+{
+ u32 t, val = 0xffff;
+ int err;
+
+ if (phy_addr >= AR7240_NUM_PHYS)
+ return 0xffff;
+
+ mutex_lock(&reg_mutex);
+ t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
+ (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
+ AR7240_MDIO_CTRL_MASTER_EN |
+ AR7240_MDIO_CTRL_BUSY |
+ AR7240_MDIO_CTRL_CMD_READ;
+
+ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
+ err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
+ AR7240_MDIO_CTRL_BUSY, 0, 5);
+ if (!err)
+ val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL);
+ mutex_unlock(&reg_mutex);
+
+ return val & AR7240_MDIO_CTRL_DATA_M;
+}
+
+int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr, u16 reg_val)
+{
+ u32 t;
+ int ret;
+
+ if (phy_addr >= AR7240_NUM_PHYS)
+ return -EINVAL;
+
+ mutex_lock(&reg_mutex);
+ t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
+ (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
+ AR7240_MDIO_CTRL_MASTER_EN |
+ AR7240_MDIO_CTRL_BUSY |
+ AR7240_MDIO_CTRL_CMD_WRITE |
+ reg_val;
+
+ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
+ ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
+ AR7240_MDIO_CTRL_BUSY, 0, 5);
+ mutex_unlock(&reg_mutex);
+
+ return ret;
+}
+
+static int ar7240sw_capture_stats(struct ar7240sw *as)
+{
+ struct mii_bus *mii = as->mii_bus;
+ int port;
+ int ret;
+
+ write_lock(&as->stats_lock);
+
+ /* Capture the hardware statistics for all ports */
+ ar7240sw_reg_rmw(mii, AR7240_REG_MIB_FUNCTION0,
+ (AR7240_MIB_FUNC_M << AR7240_MIB_FUNC_S),
+ (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
+
+ /* Wait for the capturing to complete. */
+ ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0,
+ AR7240_MIB_BUSY, 0, 10);
+
+ if (ret)
+ goto unlock;
+
+ for (port = 0; port < AR7240_NUM_PORTS; port++) {
+ unsigned int base;
+ struct ar7240sw_port_stat *stats;
+
+ base = AR7240_REG_STATS_BASE(port);
+ stats = &as->port_stats[port];
+
+#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r)
+
+ stats->rx_good_byte += READ_STAT(RXGOODBYTE);
+ stats->tx_byte += READ_STAT(TXBYTE);
+
+#undef READ_STAT
+ }
+
+ ret = 0;
+
+unlock:
+ write_unlock(&as->stats_lock);
+ return ret;
+}
+
+static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
+{
+ ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port),
+ AR7240_PORT_CTRL_STATE_DISABLED);
+}
+
+static void ar7240sw_setup(struct ar7240sw *as)
+{
+ struct mii_bus *mii = as->mii_bus;
+
+ /* Enable CPU port, and disable mirror port */
+ ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT,
+ AR7240_CPU_PORT_EN |
+ (15 << AR7240_MIRROR_PORT_S));
+
+ /* Setup TAG priority mapping */
+ ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50);
+
+ if (sw_is_ar934x(as)) {
+ /* Enable aging, MAC replacing */
+ ar7240sw_reg_write(mii, AR934X_REG_AT_CTRL,
+ 0x2b /* 5 min age time */ |
+ AR934X_AT_CTRL_AGE_EN |
+ AR934X_AT_CTRL_LEARN_CHANGE);
+ /* Enable ARP frame acknowledge */
+ ar7240sw_reg_set(mii, AR934X_REG_QM_CTRL,
+ AR934X_QM_CTRL_ARP_EN);
+ /* Enable Broadcast/Multicast frames transmitted to the CPU */
+ ar7240sw_reg_set(mii, AR934X_REG_FLOOD_MASK,
+ AR934X_FLOOD_MASK_BC_DP(0) |
+ AR934X_FLOOD_MASK_MC_DP(0));
+
+ /* setup MTU */
+ ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
+ AR9340_GLOBAL_CTRL_MTU_M,
+ AR9340_GLOBAL_CTRL_MTU_M);
+
+ /* Enable MIB counters */
+ ar7240sw_reg_set(mii, AR7240_REG_MIB_FUNCTION0,
+ AR934X_MIB_ENABLE);
+
+ } else {
+ /* Enable ARP frame acknowledge, aging, MAC replacing */
+ ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL,
+ AR7240_AT_CTRL_RESERVED |
+ 0x2b /* 5 min age time */ |
+ AR7240_AT_CTRL_AGE_EN |
+ AR7240_AT_CTRL_ARP_EN |
+ AR7240_AT_CTRL_LEARN_CHANGE);
+ /* Enable Broadcast frames transmitted to the CPU */
+ ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK,
+ AR7240_FLOOD_MASK_BROAD_TO_CPU);
+
+ /* setup MTU */
+ ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
+ AR7240_GLOBAL_CTRL_MTU_M,
+ AR7240_GLOBAL_CTRL_MTU_M);
+ }
+
+ /* setup Service TAG */
+ ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0);
+}
+
+static int ar7240sw_reset(struct ar7240sw *as)
+{
+ struct mii_bus *mii = as->mii_bus;
+ int ret;
+ int i;
+
+ /* Set all ports to disabled state. */
+ for (i = 0; i < AR7240_NUM_PORTS; i++)
+ ar7240sw_disable_port(as, i);
+
+ /* Wait for transmit queues to drain. */
+ msleep(2);
+
+ /* Reset the switch. */
+ ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL,
+ AR7240_MASK_CTRL_SOFT_RESET);
+
+ ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL,
+ AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
+
+ /* setup PHYs */
+ for (i = 0; i < AR7240_NUM_PHYS; i++) {
+ ar7240sw_phy_write(mii, i, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ ar7240sw_phy_write(mii, i, MII_BMCR,
+ BMCR_RESET | BMCR_ANENABLE);
+ }
+ msleep(1000);
+
+ ar7240sw_setup(as);
+ return ret;
+}
+
+static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask)
+{
+ struct mii_bus *mii = as->mii_bus;
+ u32 ctrl;
+ u32 vid, mode;
+
+ ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN |
+ AR7240_PORT_CTRL_SINGLE_VLAN;
+
+ if (port == AR7240_PORT_CPU) {
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
+ AR7240_PORT_STATUS_SPEED_1000 |
+ AR7240_PORT_STATUS_TXFLOW |
+ AR7240_PORT_STATUS_RXFLOW |
+ AR7240_PORT_STATUS_TXMAC |
+ AR7240_PORT_STATUS_RXMAC |
+ AR7240_PORT_STATUS_DUPLEX);
+ } else {
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
+ AR7240_PORT_STATUS_LINK_AUTO);
+ }
+
+ /* Set the default VID for this port */
+ if (as->vlan) {
+ vid = as->vlan_id[as->pvid[port]];
+ mode = AR7240_PORT_VLAN_MODE_SECURE;
+ } else {
+ vid = port;
+ mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
+ }
+
+ if (as->vlan) {
+ if (as->vlan_tagged & BIT(port))
+ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD <<
+ AR7240_PORT_CTRL_VLAN_MODE_S;
+ else
+ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP <<
+ AR7240_PORT_CTRL_VLAN_MODE_S;
+ } else {
+ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_KEEP <<
+ AR7240_PORT_CTRL_VLAN_MODE_S;
+ }
+
+ if (!portmask) {
+ if (port == AR7240_PORT_CPU)
+ portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU);
+ else
+ portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU);
+ }
+
+ /* allow the port to talk to all other ports, but exclude its
+ * own ID to prevent frames from being reflected back to the
+ * port that they came from */
+ portmask &= ar7240sw_port_mask_but(as, port);
+
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl);
+ if (sw_is_ar934x(as)) {
+ u32 vlan1, vlan2;
+
+ vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S);
+ vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) |
+ (mode << AR934X_PORT_VLAN2_8021Q_MODE_S);
+ ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1);
+ ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2);
+ } else {
+ u32 vlan;
+
+ vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) |
+ (portmask << AR7240_PORT_VLAN_DEST_PORTS_S);
+
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan);
+ }
+}
+
+static int ar7240_set_addr(struct ar7240sw *as, u8 *addr)
+{
+ struct mii_bus *mii = as->mii_bus;
+ u32 t;
+
+ t = (addr[4] << 8) | addr[5];
+ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t);
+
+ t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
+ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t);
+
+ return 0;
+}
+
+static int
+ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ as->vlan_id[val->port_vlan] = val->value.i;
+ return 0;
+}
+
+static int
+ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ val->value.i = as->vlan_id[val->port_vlan];
+ return 0;
+}
+
+static int
+ar7240_set_pvid(struct switch_dev *dev, int port, int vlan)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+
+ /* make sure no invalid PVIDs get set */
+
+ if (vlan >= dev->vlans)
+ return -EINVAL;
+
+ as->pvid[port] = vlan;
+ return 0;
+}
+
+static int
+ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ *vlan = as->pvid[port];
+ return 0;
+}
+
+static int
+ar7240_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ u8 ports = as->vlan_table[val->port_vlan];
+ int i;
+
+ val->len = 0;
+ for (i = 0; i < as->swdev.ports; i++) {
+ struct switch_port *p;
+
+ if (!(ports & (1 << i)))
+ continue;
+
+ p = &val->value.ports[val->len++];
+ p->id = i;
+ if (as->vlan_tagged & (1 << i))
+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
+ else
+ p->flags = 0;
+ }
+ return 0;
+}
+
+static int
+ar7240_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ u8 *vt = &as->vlan_table[val->port_vlan];
+ int i, j;
+
+ *vt = 0;
+ for (i = 0; i < val->len; i++) {
+ struct switch_port *p = &val->value.ports[i];
+
+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+ as->vlan_tagged |= (1 << p->id);
+ else {
+ as->vlan_tagged &= ~(1 << p->id);
+ as->pvid[p->id] = val->port_vlan;
+
+ /* make sure that an untagged port does not
+ * appear in other vlans */
+ for (j = 0; j < AR7240_MAX_VLANS; j++) {
+ if (j == val->port_vlan)
+ continue;
+ as->vlan_table[j] &= ~(1 << p->id);
+ }
+ }
+
+ *vt |= 1 << p->id;
+ }
+ return 0;
+}
+
+static int
+ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ as->vlan = !!val->value.i;
+ return 0;
+}
+
+static int
+ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ val->value.i = as->vlan;
+ return 0;
+}
+
+static void
+ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val)
+{
+ struct mii_bus *mii = as->mii_bus;
+
+ if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5))
+ return;
+
+ if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) {
+ val &= AR7240_VTUDATA_MEMBER;
+ val |= AR7240_VTUDATA_VALID;
+ ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val);
+ }
+ op |= AR7240_VTU_ACTIVE;
+ ar7240sw_reg_write(mii, AR7240_REG_VTU, op);
+}
+
+static int
+ar7240_hw_apply(struct switch_dev *dev)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ u8 portmask[AR7240_NUM_PORTS];
+ int i, j;
+
+ /* flush all vlan translation unit entries */
+ ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0);
+
+ memset(portmask, 0, sizeof(portmask));
+ if (as->vlan) {
+ /* calculate the port destination masks and load vlans
+ * into the vlan translation unit */
+ for (j = 0; j < AR7240_MAX_VLANS; j++) {
+ u8 vp = as->vlan_table[j];
+
+ if (!vp)
+ continue;
+
+ for (i = 0; i < as->swdev.ports; i++) {
+ u8 mask = (1 << i);
+ if (vp & mask)
+ portmask[i] |= vp & ~mask;
+ }
+
+ ar7240_vtu_op(as,
+ AR7240_VTU_OP_LOAD |
+ (as->vlan_id[j] << AR7240_VTU_VID_S),
+ as->vlan_table[j]);
+ }
+ } else {
+ /* vlan disabled:
+ * isolate all ports, but connect them to the cpu port */
+ for (i = 0; i < as->swdev.ports; i++) {
+ if (i == AR7240_PORT_CPU)
+ continue;
+
+ portmask[i] = 1 << AR7240_PORT_CPU;
+ portmask[AR7240_PORT_CPU] |= (1 << i);
+ }
+ }
+
+ /* update the port destination mask registers and tag settings */
+ for (i = 0; i < as->swdev.ports; i++)
+ ar7240sw_setup_port(as, i, portmask[i]);
+
+ return 0;
+}
+
+static int
+ar7240_reset_switch(struct switch_dev *dev)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ ar7240sw_reset(as);
+ return 0;
+}
+
+static int
+ar7240_get_port_link(struct switch_dev *dev, int port,
+ struct switch_port_link *link)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ struct mii_bus *mii = as->mii_bus;
+ u32 status;
+
+ if (port > AR7240_NUM_PORTS)
+ return -EINVAL;
+
+ status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
+ link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO);
+ if (link->aneg) {
+ link->link = !!(status & AR7240_PORT_STATUS_LINK_UP);
+ if (!link->link)
+ return 0;
+ } else {
+ link->link = true;
+ }
+
+ link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX);
+ link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW);
+ link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW);
+ switch (status & AR7240_PORT_STATUS_SPEED_M) {
+ case AR7240_PORT_STATUS_SPEED_10:
+ link->speed = SWITCH_PORT_SPEED_10;
+ break;
+ case AR7240_PORT_STATUS_SPEED_100:
+ link->speed = SWITCH_PORT_SPEED_100;
+ break;
+ case AR7240_PORT_STATUS_SPEED_1000:
+ link->speed = SWITCH_PORT_SPEED_1000;
+ break;
+ }
+
+ return 0;
+}
+
+static int
+ar7240_get_port_stats(struct switch_dev *dev, int port,
+ struct switch_port_stats *stats)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+
+ if (port > AR7240_NUM_PORTS)
+ return -EINVAL;
+
+ ar7240sw_capture_stats(as);
+
+ read_lock(&as->stats_lock);
+ stats->rx_bytes = as->port_stats[port].rx_good_byte;
+ stats->tx_bytes = as->port_stats[port].tx_byte;
+ read_unlock(&as->stats_lock);
+
+ return 0;
+}
+
+static struct switch_attr ar7240_globals[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "enable_vlan",
+ .description = "Enable VLAN mode",
+ .set = ar7240_set_vlan,
+ .get = ar7240_get_vlan,
+ .max = 1
+ },
+};
+
+static struct switch_attr ar7240_port[] = {
+};
+
+static struct switch_attr ar7240_vlan[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "vid",
+ .description = "VLAN ID",
+ .set = ar7240_set_vid,
+ .get = ar7240_get_vid,
+ .max = 4094,
+ },
+};
+
+static const struct switch_dev_ops ar7240_ops = {
+ .attr_global = {
+ .attr = ar7240_globals,
+ .n_attr = ARRAY_SIZE(ar7240_globals),
+ },
+ .attr_port = {
+ .attr = ar7240_port,
+ .n_attr = ARRAY_SIZE(ar7240_port),
+ },
+ .attr_vlan = {
+ .attr = ar7240_vlan,
+ .n_attr = ARRAY_SIZE(ar7240_vlan),
+ },
+ .get_port_pvid = ar7240_get_pvid,
+ .set_port_pvid = ar7240_set_pvid,
+ .get_vlan_ports = ar7240_get_ports,
+ .set_vlan_ports = ar7240_set_ports,
+ .apply_config = ar7240_hw_apply,
+ .reset_switch = ar7240_reset_switch,
+ .get_port_link = ar7240_get_port_link,
+ .get_port_stats = ar7240_get_port_stats,
+};
+
+static struct ar7240sw *ar7240_probe(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct mii_bus *mii = ag->mii_bus;
+ struct ar7240sw *as;
+ struct switch_dev *swdev;
+ u32 ctrl;
+ u16 phy_id1;
+ u16 phy_id2;
+ int i;
+
+ phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1);
+ phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2);
+ if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) &&
+ (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) {
+ pr_err("%s: unknown phy id '%04x:%04x'\n",
+ dev_name(&mii->dev), phy_id1, phy_id2);
+ return NULL;
+ }
+
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
+ if (!as)
+ return NULL;
+
+ as->mii_bus = mii;
+ as->swdata = pdata->switch_data;
+
+ swdev = &as->swdev;
+
+ ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL);
+ as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) &
+ AR7240_MASK_CTRL_VERSION_M;
+
+ if (sw_is_ar7240(as)) {
+ swdev->name = "AR7240/AR9330 built-in switch";
+ swdev->ports = AR7240_NUM_PORTS - 1;
+ } else if (sw_is_ar934x(as)) {
+ swdev->name = "AR934X built-in switch";
+
+ if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) {
+ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
+ AR934X_OPER_MODE0_MAC_GMII_EN);
+ } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) {
+ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
+ AR934X_OPER_MODE0_PHY_MII_EN);
+ } else {
+ pr_err("%s: invalid PHY interface mode\n",
+ dev_name(&mii->dev));
+ goto err_free;
+ }
+
+ if (as->swdata->phy4_mii_en) {
+ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1,
+ AR934X_REG_OPER_MODE1_PHY4_MII_EN);
+ swdev->ports = AR7240_NUM_PORTS - 1;
+ } else {
+ swdev->ports = AR7240_NUM_PORTS;
+ }
+ } else {
+ pr_err("%s: unsupported chip, ctrl=%08x\n",
+ dev_name(&mii->dev), ctrl);
+ goto err_free;
+ }
+
+ swdev->cpu_port = AR7240_PORT_CPU;
+ swdev->vlans = AR7240_MAX_VLANS;
+ swdev->ops = &ar7240_ops;
+
+ if (register_switch(&as->swdev, ag->dev) < 0)
+ goto err_free;
+
+ pr_info("%s: Found an %s\n", dev_name(&mii->dev), swdev->name);
+
+ /* initialize defaults */
+ for (i = 0; i < AR7240_MAX_VLANS; i++)
+ as->vlan_id[i] = i;
+
+ as->vlan_table[0] = ar7240sw_port_mask_all(as);
+
+ return as;
+
+err_free:
+ kfree(as);
+ return NULL;
+}
+
+static void link_function(struct work_struct *work) {
+ struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work);
+ struct ar7240sw *as = ag->phy_priv;
+ unsigned long flags;
+ u8 mask;
+ int i;
+ int status = 0;
+
+ mask = ~as->swdata->phy_poll_mask;
+ for (i = 0; i < AR7240_NUM_PHYS; i++) {
+ int link;
+
+ if (!(mask & BIT(i)))
+ continue;
+
+ link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR);
+ if (link & BMSR_LSTATUS) {
+ status = 1;
+ break;
+ }
+ }
+
+ spin_lock_irqsave(&ag->lock, flags);
+ if (status != ag->link) {
+ ag->link = status;
+ ag71xx_link_adjust(ag);
+ }
+ spin_unlock_irqrestore(&ag->lock, flags);
+
+ schedule_delayed_work(&ag->link_work, HZ / 2);
+}
+
+void ag71xx_ar7240_start(struct ag71xx *ag)
+{
+ struct ar7240sw *as = ag->phy_priv;
+
+ ar7240sw_reset(as);
+
+ ag->speed = SPEED_1000;
+ ag->duplex = 1;
+
+ ar7240_set_addr(as, ag->dev->dev_addr);
+ ar7240_hw_apply(&as->swdev);
+
+ schedule_delayed_work(&ag->link_work, HZ / 10);
+}
+
+void ag71xx_ar7240_stop(struct ag71xx *ag)
+{
+ cancel_delayed_work_sync(&ag->link_work);
+}
+
+int ag71xx_ar7240_init(struct ag71xx *ag)
+{
+ struct ar7240sw *as;
+
+ as = ar7240_probe(ag);
+ if (!as)
+ return -ENODEV;
+
+ ag->phy_priv = as;
+ ar7240sw_reset(as);
+
+ rwlock_init(&as->stats_lock);
+ INIT_DELAYED_WORK(&ag->link_work, link_function);
+
+ return 0;
+}
+
+void ag71xx_ar7240_cleanup(struct ag71xx *ag)
+{
+ struct ar7240sw *as = ag->phy_priv;
+
+ if (!as)
+ return;
+
+ unregister_switch(&as->swdev);
+ kfree(as);
+ ag->phy_priv = NULL;
+}
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c
new file mode 100644
index 0000000..7ec43b7
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c
@@ -0,0 +1,44 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ * Special support for the Atheros ar8216 switch chip
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <***@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AR8216_PACKET_TYPE_MASK 0xf
+#define AR8216_PACKET_TYPE_NORMAL 0
+
+#define AR8216_HEADER_LEN 2
+
+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
+{
+ skb_push(skb, AR8216_HEADER_LEN);
+ skb->data[0] = 0x10;
+ skb->data[1] = 0x80;
+}
+
+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
+ int pktlen)
+{
+ u8 type;
+
+ type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
+ switch (type) {
+ case AR8216_PACKET_TYPE_NORMAL:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ skb_pull(skb, AR8216_HEADER_LEN);
+ return 0;
+}
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c
new file mode 100644
index 0000000..757a572
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c
@@ -0,0 +1,284 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/debugfs.h>
+
+#include "ag71xx.h"
+
+static struct dentry *ag71xx_debugfs_root;
+
+static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
+{
+ if (status)
+ ag->debug.int_stats.total++;
+ if (status & AG71XX_INT_TX_PS)
+ ag->debug.int_stats.tx_ps++;
+ if (status & AG71XX_INT_TX_UR)
+ ag->debug.int_stats.tx_ur++;
+ if (status & AG71XX_INT_TX_BE)
+ ag->debug.int_stats.tx_be++;
+ if (status & AG71XX_INT_RX_PR)
+ ag->debug.int_stats.rx_pr++;
+ if (status & AG71XX_INT_RX_OF)
+ ag->debug.int_stats.rx_of++;
+ if (status & AG71XX_INT_RX_BE)
+ ag->debug.int_stats.rx_be++;
+}
+
+static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+#define PR_INT_STAT(_label, _field) \
+ len += snprintf(buf + len, sizeof(buf) - len, \
+ "%20s: %10lu\n", _label, ag->debug.int_stats._field);
+
+ struct ag71xx *ag = file->private_data;
+ char buf[256];
+ unsigned int len = 0;
+
+ PR_INT_STAT("TX Packet Sent", tx_ps);
+ PR_INT_STAT("TX Underrun", tx_ur);
+ PR_INT_STAT("TX Bus Error", tx_be);
+ PR_INT_STAT("RX Packet Received", rx_pr);
+ PR_INT_STAT("RX Overflow", rx_of);
+ PR_INT_STAT("RX Bus Error", rx_be);
+ len += snprintf(buf + len, sizeof(buf) - len, "\n");
+ PR_INT_STAT("Total", total);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+#undef PR_INT_STAT
+}
+
+static const struct file_operations ag71xx_fops_int_stats = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_int_stats,
+ .owner = THIS_MODULE
+};
+
+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
+{
+ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
+
+ if (rx) {
+ stats->rx_count++;
+ stats->rx_packets += rx;
+ if (rx <= AG71XX_NAPI_WEIGHT)
+ stats->rx[rx]++;
+ if (rx > stats->rx_packets_max)
+ stats->rx_packets_max = rx;
+ }
+
+ if (tx) {
+ stats->tx_count++;
+ stats->tx_packets += tx;
+ if (tx <= AG71XX_NAPI_WEIGHT)
+ stats->tx[tx]++;
+ if (tx > stats->tx_packets_max)
+ stats->tx_packets_max = tx;
+ }
+}
+
+static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ag71xx *ag = file->private_data;
+ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
+ char *buf;
+ unsigned int buflen;
+ unsigned int len = 0;
+ unsigned long rx_avg = 0;
+ unsigned long tx_avg = 0;
+ int ret;
+ int i;
+
+ buflen = 2048;
+ buf = kmalloc(buflen, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (stats->rx_count)
+ rx_avg = stats->rx_packets / stats->rx_count;
+
+ if (stats->tx_count)
+ tx_avg = stats->tx_packets / stats->tx_count;
+
+ len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n",
+ "len", "rx", "tx");
+
+ for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
+ len += snprintf(buf + len, buflen - len,
+ "%3d: %10lu %10lu\n",
+ i, stats->rx[i], stats->tx[i]);
+
+ len += snprintf(buf + len, buflen - len, "\n");
+
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "sum", stats->rx_count, stats->tx_count);
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "avg", rx_avg, tx_avg);
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "max", stats->rx_packets_max, stats->tx_packets_max);
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "pkt", stats->rx_packets, stats->tx_packets);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return ret;
+}
+
+static const struct file_operations ag71xx_fops_napi_stats = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_napi_stats,
+ .owner = THIS_MODULE
+};
+
+#define DESC_PRINT_LEN 64
+
+static ssize_t read_file_ring(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos,
+ struct ag71xx *ag,
+ struct ag71xx_ring *ring,
+ unsigned desc_reg)
+{
+ char *buf;
+ unsigned int buflen;
+ unsigned int len = 0;
+ unsigned long flags;
+ ssize_t ret;
+ int curr;
+ int dirty;
+ u32 desc_hw;
+ int i;
+
+ buflen = (ring->size * DESC_PRINT_LEN);
+ buf = kmalloc(buflen, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ len += snprintf(buf + len, buflen - len,
+ "Idx ... %-8s %-8s %-8s %-8s . %-10s\n",
+ "desc", "next", "data", "ctrl", "timestamp");
+
+ spin_lock_irqsave(&ag->lock, flags);
+
+ curr = (ring->curr % ring->size);
+ dirty = (ring->dirty % ring->size);
+ desc_hw = ag71xx_rr(ag, desc_reg);
+ for (i = 0; i < ring->size; i++) {
+ struct ag71xx_buf *ab = &ring->buf[i];
+ u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size;
+
+ len += snprintf(buf + len, buflen - len,
+ "%3d %c%c%c %08x %08x %08x %08x %c %10lu\n",
+ i,
+ (i == curr) ? 'C' : ' ',
+ (i == dirty) ? 'D' : ' ',
+ (desc_hw == desc_dma) ? 'H' : ' ',
+ desc_dma,
+ ab->desc->next,
+ ab->desc->data,
+ ab->desc->ctrl,
+ (ab->desc->ctrl & DESC_EMPTY) ? 'E' : '*',
+ ab->timestamp);
+ }
+
+ spin_unlock_irqrestore(&ag->lock, flags);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return ret;
+}
+
+static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ag71xx *ag = file->private_data;
+
+ return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring,
+ AG71XX_REG_TX_DESC);
+}
+
+static const struct file_operations ag71xx_fops_tx_ring = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_tx_ring,
+ .owner = THIS_MODULE
+};
+
+static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ag71xx *ag = file->private_data;
+
+ return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring,
+ AG71XX_REG_RX_DESC);
+}
+
+static const struct file_operations ag71xx_fops_rx_ring = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_rx_ring,
+ .owner = THIS_MODULE
+};
+
+void ag71xx_debugfs_exit(struct ag71xx *ag)
+{
+ debugfs_remove_recursive(ag->debug.debugfs_dir);
+}
+
+int ag71xx_debugfs_init(struct ag71xx *ag)
+{
+ struct device *dev = &ag->pdev->dev;
+
+ ag->debug.debugfs_dir = debugfs_create_dir(dev_name(dev),
+ ag71xx_debugfs_root);
+ if (!ag->debug.debugfs_dir) {
+ dev_err(dev, "unable to create debugfs directory\n");
+ return -ENOENT;
+ }
+
+ debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_int_stats);
+ debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_napi_stats);
+ debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_tx_ring);
+ debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_rx_ring);
+
+ return 0;
+}
+
+int ag71xx_debugfs_root_init(void)
+{
+ if (ag71xx_debugfs_root)
+ return -EBUSY;
+
+ ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (!ag71xx_debugfs_root)
+ return -ENOENT;
+
+ return 0;
+}
+
+void ag71xx_debugfs_root_exit(void)
+{
+ debugfs_remove(ag71xx_debugfs_root);
+ ag71xx_debugfs_root = NULL;
+}
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c
new file mode 100644
index 0000000..498fbed
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c
@@ -0,0 +1,124 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+static int ag71xx_ethtool_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct phy_device *phydev = ag->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static int ag71xx_ethtool_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct phy_device *phydev = ag->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_sset(phydev, cmd);
+}
+
+static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ strcpy(info->driver, ag->pdev->dev.driver->name);
+ strcpy(info->version, AG71XX_DRV_VERSION);
+ strcpy(info->bus_info, dev_name(&ag->pdev->dev));
+}
+
+static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ return ag->msg_enable;
+}
+
+static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ ag->msg_enable = msg_level;
+}
+
+static void ag71xx_ethtool_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *er)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX;
+ er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX;
+ er->rx_mini_max_pending = 0;
+ er->rx_jumbo_max_pending = 0;
+
+ er->tx_pending = ag->tx_ring.size;
+ er->rx_pending = ag->rx_ring.size;
+ er->rx_mini_pending = 0;
+ er->rx_jumbo_pending = 0;
+}
+
+static int ag71xx_ethtool_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *er)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ unsigned tx_size;
+ unsigned rx_size;
+ int err;
+
+ if (er->rx_mini_pending != 0||
+ er->rx_jumbo_pending != 0 ||
+ er->rx_pending == 0 ||
+ er->tx_pending == 0)
+ return -EINVAL;
+
+ tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ?
+ er->tx_pending : AG71XX_TX_RING_SIZE_MAX;
+
+ rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ?
+ er->rx_pending : AG71XX_RX_RING_SIZE_MAX;
+
+ if (netif_running(dev)) {
+ err = dev->netdev_ops->ndo_stop(dev);
+ if (err)
+ return err;
+ }
+
+ ag->tx_ring.size = tx_size;
+ ag->rx_ring.size = rx_size;
+
+ if (netif_running(dev))
+ err = dev->netdev_ops->ndo_open(dev);
+
+ return err;
+}
+
+struct ethtool_ops ag71xx_ethtool_ops = {
+ .set_settings = ag71xx_ethtool_set_settings,
+ .get_settings = ag71xx_ethtool_get_settings,
+ .get_drvinfo = ag71xx_ethtool_get_drvinfo,
+ .get_msglevel = ag71xx_ethtool_get_msglevel,
+ .set_msglevel = ag71xx_ethtool_set_msglevel,
+ .get_ringparam = ag71xx_ethtool_get_ringparam,
+ .set_ringparam = ag71xx_ethtool_set_ringparam,
+ .get_link = ethtool_op_get_link,
+};
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
new file mode 100644
index 0000000..d010373
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
@@ -0,0 +1,1325 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AG71XX_DEFAULT_MSG_ENABLE \
+ (NETIF_MSG_DRV \
+ | NETIF_MSG_PROBE \
+ | NETIF_MSG_LINK \
+ | NETIF_MSG_TIMER \
+ | NETIF_MSG_IFDOWN \
+ | NETIF_MSG_IFUP \
+ | NETIF_MSG_RX_ERR \
+ | NETIF_MSG_TX_ERR)
+
+static int ag71xx_msg_level = -1;
+
+module_param_named(msg_level, ag71xx_msg_level, int, 0);
+MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
+
+#define ETH_SWITCH_HEADER_LEN 2
+
+static inline unsigned int ag71xx_max_frame_len(unsigned int mtu)
+{
+ return ETH_SWITCH_HEADER_LEN + ETH_HLEN + VLAN_HLEN + mtu + ETH_FCS_LEN;
+}
+
+static void ag71xx_dump_dma_regs(struct ag71xx *ag)
+{
+ DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
+ ag71xx_rr(ag, AG71XX_REG_TX_DESC),
+ ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
+
+ DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
+ ag71xx_rr(ag, AG71XX_REG_RX_DESC),
+ ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
+}
+
+static void ag71xx_dump_regs(struct ag71xx *ag)
+{
+ DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
+ ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
+ ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
+ ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
+ DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
+ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
+ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
+ DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
+ DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
+}
+
+static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
+{
+ DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
+ ag->dev->name, label, intr,
+ (intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
+ (intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
+ (intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
+ (intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
+ (intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
+ (intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
+}
+
+static void ag71xx_ring_free(struct ag71xx_ring *ring)
+{
+ kfree(ring->buf);
+
+ if (ring->descs_cpu)
+ dma_free_coherent(NULL, ring->size * ring->desc_size,
+ ring->descs_cpu, ring->descs_dma);
+}
+
+static int ag71xx_ring_alloc(struct ag71xx_ring *ring)
+{
+ int err;
+ int i;
+
+ ring->desc_size = sizeof(struct ag71xx_desc);
+ if (ring->desc_size % cache_line_size()) {
+ DBG("ag71xx: ring %p, desc size %u rounded to %u\n",
+ ring, ring->desc_size,
+ roundup(ring->desc_size, cache_line_size()));
+ ring->desc_size = roundup(ring->desc_size, cache_line_size());
+ }
+
+ ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size,
+ &ring->descs_dma, GFP_ATOMIC);
+ if (!ring->descs_cpu) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+
+ ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL);
+ if (!ring->buf) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < ring->size; i++) {
+ int idx = i * ring->desc_size;
+ ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[idx];
+ DBG("ag71xx: ring %p, desc %d at %p\n",
+ ring, i, ring->buf[i].desc);
+ }
+
+ return 0;
+
+err:
+ return err;
+}
+
+static void ag71xx_ring_tx_clean(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ struct net_device *dev = ag->dev;
+ u32 bytes_compl = 0, pkts_compl = 0;
+
+ while (ring->curr != ring->dirty) {
+ u32 i = ring->dirty % ring->size;
+
+ if (!ag71xx_desc_empty(ring->buf[i].desc)) {
+ ring->buf[i].desc->ctrl = 0;
+ dev->stats.tx_errors++;
+ }
+
+ if (ring->buf[i].skb) {
+ bytes_compl += ring->buf[i].len;
+ pkts_compl++;
+ dev_kfree_skb_any(ring->buf[i].skb);
+ }
+ ring->buf[i].skb = NULL;
+ ring->dirty++;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
+}
+
+static void ag71xx_ring_tx_init(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ int i;
+
+ for (i = 0; i < ring->size; i++) {
+ ring->buf[i].desc->next = (u32) (ring->descs_dma +
+ ring->desc_size * ((i + 1) % ring->size));
+
+ ring->buf[i].desc->ctrl = DESC_EMPTY;
+ ring->buf[i].skb = NULL;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+ ring->curr = 0;
+ ring->dirty = 0;
+ netdev_reset_queue(ag->dev);
+}
+
+static void ag71xx_ring_rx_clean(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ int i;
+
+ if (!ring->buf)
+ return;
+
+ for (i = 0; i < ring->size; i++)
+ if (ring->buf[i].rx_buf) {
+ dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr,
+ ag->rx_buf_size, DMA_FROM_DEVICE);
+ kfree(ring->buf[i].rx_buf);
+ }
+}
+
+static int ag71xx_buffer_offset(struct ag71xx *ag)
+{
+ int offset = NET_SKB_PAD;
+
+ /*
+ * On AR71xx/AR91xx packets must be 4-byte aligned.
+ *
+ * When using builtin AR8216 support, hardware adds a 2-byte header,
+ * so we don't need any extra alignment in that case.
+ */
+ if (!ag71xx_get_pdata(ag)->is_ar724x || ag71xx_has_ar8216(ag))
+ return offset;
+
+ return offset + NET_IP_ALIGN;
+}
+
+static bool ag71xx_fill_rx_buf(struct ag71xx *ag, struct ag71xx_buf *buf,
+ int offset)
+{
+ void *data;
+
+ data = kmalloc(ag->rx_buf_size +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)),
+ GFP_ATOMIC);
+ if (!data)
+ return false;
+
+ buf->rx_buf = data;
+ buf->dma_addr = dma_map_single(&ag->dev->dev, data, ag->rx_buf_size,
+ DMA_FROM_DEVICE);
+ buf->desc->data = (u32) buf->dma_addr + offset;
+ return true;
+}
+
+static int ag71xx_ring_rx_init(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ unsigned int i;
+ int ret;
+ int offset = ag71xx_buffer_offset(ag);
+
+ ret = 0;
+ for (i = 0; i < ring->size; i++) {
+ ring->buf[i].desc->next = (u32) (ring->descs_dma +
+ ring->desc_size * ((i + 1) % ring->size));
+
+ DBG("ag71xx: RX desc at %p, next is %08x\n",
+ ring->buf[i].desc,
+ ring->buf[i].desc->next);
+ }
+
+ for (i = 0; i < ring->size; i++) {
+ if (!ag71xx_fill_rx_buf(ag, &ring->buf[i], offset)) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ ring->buf[i].desc->ctrl = DESC_EMPTY;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+ ring->curr = 0;
+ ring->dirty = 0;
+
+ return ret;
+}
+
+static int ag71xx_ring_rx_refill(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ unsigned int count;
+ int offset = ag71xx_buffer_offset(ag);
+
+ count = 0;
+ for (; ring->curr - ring->dirty > 0; ring->dirty++) {
+ unsigned int i;
+
+ i = ring->dirty % ring->size;
+
+ if (!ring->buf[i].rx_buf &&
+ !ag71xx_fill_rx_buf(ag, &ring->buf[i], offset))
+ break;
+
+ ring->buf[i].desc->ctrl = DESC_EMPTY;
+ count++;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+ DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
+
+ return count;
+}
+
+static int ag71xx_rings_init(struct ag71xx *ag)
+{
+ int ret;
+
+ ret = ag71xx_ring_alloc(&ag->tx_ring);
+ if (ret)
+ return ret;
+
+ ag71xx_ring_tx_init(ag);
+
+ ret = ag71xx_ring_alloc(&ag->rx_ring);
+ if (ret)
+ return ret;
+
+ ret = ag71xx_ring_rx_init(ag);
+ return ret;
+}
+
+static void ag71xx_rings_cleanup(struct ag71xx *ag)
+{
+ ag71xx_ring_rx_clean(ag);
+ ag71xx_ring_free(&ag->rx_ring);
+
+ ag71xx_ring_tx_clean(ag);
+ netdev_reset_queue(ag->dev);
+ ag71xx_ring_free(&ag->tx_ring);
+}
+
+static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
+{
+ switch (ag->speed) {
+ case SPEED_1000:
+ return "1000";
+ case SPEED_100:
+ return "100";
+ case SPEED_10:
+ return "10";
+ }
+
+ return "?";
+}
+
+static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
+{
+ u32 t;
+
+ t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
+ | (((u32) mac[3]) << 8) | ((u32) mac[2]);
+
+ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
+
+ t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
+ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
+}
+
+static void ag71xx_dma_reset(struct ag71xx *ag)
+{
+ u32 val;
+ int i;
+
+ ag71xx_dump_dma_regs(ag);
+
+ /* stop RX and TX */
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
+
+ /*
+ * give the hardware some time to really stop all rx/tx activity
+ * clearing the descriptors too early causes random memory corruption
+ */
+ mdelay(1);
+
+ /* clear descriptor addresses */
+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma);
+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma);
+
+ /* clear pending RX/TX interrupts */
+ for (i = 0; i < 256; i++) {
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
+ }
+
+ /* clear pending errors */
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
+
+ val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
+ if (val)
+ pr_alert("%s: unable to clear DMA Rx status: %08x\n",
+ ag->dev->name, val);
+
+ val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
+
+ /* mask out reserved bits */
+ val &= ~0xff000000;
+
+ if (val)
+ pr_alert("%s: unable to clear DMA Tx status: %08x\n",
+ ag->dev->name, val);
+
+ ag71xx_dump_dma_regs(ag);
+}
+
+#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \
+ MAC_CFG1_SRX | MAC_CFG1_STX)
+
+#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
+
+#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
+ FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
+ FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
+ FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
+ FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
+ FIFO_CFG4_VT)
+
+#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
+ FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
+ FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
+ FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
+ FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
+ FIFO_CFG5_17 | FIFO_CFG5_SF)
+
+static void ag71xx_hw_stop(struct ag71xx *ag)
+{
+ /* disable all interrupts and stop the rx/tx engine */
+ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
+}
+
+static void ag71xx_hw_setup(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ /* setup MAC configuration registers */
+ ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT);
+
+ ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
+ MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
+
+ /* setup max frame length to zero */
+ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0);
+
+ /* setup FIFO configuration registers */
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
+ if (pdata->is_ar724x) {
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2);
+ } else {
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
+ }
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
+}
+
+static void ag71xx_hw_init(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ u32 reset_mask = pdata->reset_bit;
+
+ ag71xx_hw_stop(ag);
+
+ if (pdata->is_ar724x) {
+ u32 reset_phy = reset_mask;
+
+ reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY;
+ reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY);
+
+ ath79_device_reset_set(reset_phy);
+ mdelay(50);
+ ath79_device_reset_clear(reset_phy);
+ mdelay(200);
+ }
+
+ ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
+ udelay(20);
+
+ ath79_device_reset_set(reset_mask);
+ mdelay(100);
+ ath79_device_reset_clear(reset_mask);
+ mdelay(200);
+
+ ag71xx_hw_setup(ag);
+
+ ag71xx_dma_reset(ag);
+}
+
+static void ag71xx_fast_reset(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct net_device *dev = ag->dev;
+ u32 reset_mask = pdata->reset_bit;
+ u32 rx_ds, tx_ds;
+ u32 mii_reg;
+
+ reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC;
+
+ mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG);
+ rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC);
+ tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC);
+
+ ath79_device_reset_set(reset_mask);
+ udelay(10);
+ ath79_device_reset_clear(reset_mask);
+ udelay(10);
+
+ ag71xx_dma_reset(ag);
+ ag71xx_hw_setup(ag);
+
+ /* setup max frame length */
+ ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
+ ag71xx_max_frame_len(ag->dev->mtu));
+
+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds);
+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds);
+ ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg);
+
+ ag71xx_hw_set_macaddr(ag, dev->dev_addr);
+}
+
+static void ag71xx_hw_start(struct ag71xx *ag)
+{
+ /* start RX engine */
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+
+ /* enable interrupts */
+ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
+}
+
+void ag71xx_link_adjust(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ u32 cfg2;
+ u32 ifctl;
+ u32 fifo5;
+
+ if (!ag->link) {
+ ag71xx_hw_stop(ag);
+ netif_carrier_off(ag->dev);
+ if (netif_msg_link(ag))
+ pr_info("%s: link down\n", ag->dev->name);
+ return;
+ }
+
+ if (pdata->is_ar724x)
+ ag71xx_fast_reset(ag);
+
+ cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
+ cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
+ cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
+
+ ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
+ ifctl &= ~(MAC_IFCTL_SPEED);
+
+ fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
+ fifo5 &= ~FIFO_CFG5_BM;
+
+ switch (ag->speed) {
+ case SPEED_1000:
+ cfg2 |= MAC_CFG2_IF_1000;
+ fifo5 |= FIFO_CFG5_BM;
+ break;
+ case SPEED_100:
+ cfg2 |= MAC_CFG2_IF_10_100;
+ ifctl |= MAC_IFCTL_SPEED;
+ break;
+ case SPEED_10:
+ cfg2 |= MAC_CFG2_IF_10_100;
+ break;
+ default:
+ BUG();
+ return;
+ }
+
+ if (pdata->is_ar91xx)
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff);
+ else if (pdata->is_ar724x)
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3);
+ else
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
+
+ if (pdata->set_speed)
+ pdata->set_speed(ag->speed);
+
+ ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
+ ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
+ ag71xx_hw_start(ag);
+
+ netif_carrier_on(ag->dev);
+ if (netif_msg_link(ag))
+ pr_info("%s: link up (%sMbps/%s duplex)\n",
+ ag->dev->name,
+ ag71xx_speed_str(ag),
+ (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
+
+ DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
+
+ DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
+
+ DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
+ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL));
+}
+
+static int ag71xx_open(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ unsigned int max_frame_len;
+ int ret;
+
+ max_frame_len = ag71xx_max_frame_len(dev->mtu);
+ ag->rx_buf_size = max_frame_len + NET_SKB_PAD + NET_IP_ALIGN;
+
+ /* setup max frame length */
+ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len);
+
+ ret = ag71xx_rings_init(ag);
+ if (ret)
+ goto err;
+
+ napi_enable(&ag->napi);
+
+ netif_carrier_off(dev);
+ ag71xx_phy_start(ag);
+
+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
+
+ ag71xx_hw_set_macaddr(ag, dev->dev_addr);
+
+ netif_start_queue(dev);
+
+ return 0;
+
+err:
+ ag71xx_rings_cleanup(ag);
+ return ret;
+}
+
+static int ag71xx_stop(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ unsigned long flags;
+
+ netif_carrier_off(dev);
+ ag71xx_phy_stop(ag);
+
+ spin_lock_irqsave(&ag->lock, flags);
+
+ netif_stop_queue(dev);
+
+ ag71xx_hw_stop(ag);
+ ag71xx_dma_reset(ag);
+
+ napi_disable(&ag->napi);
+ del_timer_sync(&ag->oom_timer);
+
+ spin_unlock_irqrestore(&ag->lock, flags);
+
+ ag71xx_rings_cleanup(ag);
+
+ return 0;
+}
+
+static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ struct ag71xx_desc *desc;
+ dma_addr_t dma_addr;
+ int i;
+
+ i = ring->curr % ring->size;
+ desc = ring->buf[i].desc;
+
+ if (!ag71xx_desc_empty(desc))
+ goto err_drop;
+
+ if (ag71xx_has_ar8216(ag))
+ ag71xx_add_ar8216_header(ag, skb);
+
+ if (skb->len <= 0) {
+ DBG("%s: packet len is too small\n", ag->dev->name);
+ goto err_drop;
+ }
+
+ dma_addr = dma_map_single(&dev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+
+ netdev_sent_queue(dev, skb->len);
+ ring->buf[i].len = skb->len;
+ ring->buf[i].skb = skb;
+ ring->buf[i].timestamp = jiffies;
+
+ /* setup descriptor fields */
+ desc->data = (u32) dma_addr;
+ desc->ctrl = skb->len & ag->desc_pktlen_mask;
+
+ /* flush descriptor */
+ wmb();
+
+ ring->curr++;
+ if (ring->curr == (ring->dirty + ring->size)) {
+ DBG("%s: tx queue full\n", ag->dev->name);
+ netif_stop_queue(dev);
+ }
+
+ DBG("%s: packet injected into TX queue\n", ag->dev->name);
+
+ /* enable TX engine */
+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
+
+ return NETDEV_TX_OK;
+
+err_drop:
+ dev->stats.tx_dropped++;
+
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ int ret;
+
+ switch (cmd) {
+ case SIOCETHTOOL:
+ if (ag->phy_dev == NULL)
+ break;
+
+ spin_lock_irq(&ag->lock);
+ ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
+ spin_unlock_irq(&ag->lock);
+ return ret;
+
+ case SIOCSIFHWADDR:
+ if (copy_from_user
+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGIFHWADDR:
+ if (copy_to_user
+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (ag->phy_dev == NULL)
+ break;
+
+ return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static void ag71xx_oom_timer_handler(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ag71xx *ag = netdev_priv(dev);
+
+ napi_schedule(&ag->napi);
+}
+
+static void ag71xx_tx_timeout(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ if (netif_msg_tx_err(ag))
+ pr_info("%s: tx timeout\n", ag->dev->name);
+
+ schedule_work(&ag->restart_work);
+}
+
+static void ag71xx_restart_work_func(struct work_struct *work)
+{
+ struct ag71xx *ag = container_of(work, struct ag71xx, restart_work);
+
+ if (ag71xx_get_pdata(ag)->is_ar724x) {
+ ag->link = 0;
+ ag71xx_link_adjust(ag);
+ return;
+ }
+
+ ag71xx_stop(ag->dev);
+ ag71xx_open(ag->dev);
+}
+
+static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp)
+{
+ u32 rx_sm, tx_sm, rx_fd;
+
+ if (likely(time_before(jiffies, timestamp + HZ/10)))
+ return false;
+
+ if (!netif_carrier_ok(ag->dev))
+ return false;
+
+ rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM);
+ if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6)
+ return true;
+
+ tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM);
+ rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH);
+ if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) &&
+ ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0)
+ return true;
+
+ return false;
+}
+
+static int ag71xx_tx_packets(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ int sent = 0;
+ int bytes_compl = 0;
+
+ DBG("%s: processing TX ring\n", ag->dev->name);
+
+ while (ring->dirty != ring->curr) {
+ unsigned int i = ring->dirty % ring->size;
+ struct ag71xx_desc *desc = ring->buf[i].desc;
+ struct sk_buff *skb = ring->buf[i].skb;
+ int len = ring->buf[i].len;
+
+ if (!ag71xx_desc_empty(desc)) {
+ if (pdata->is_ar7240 &&
+ ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp))
+ schedule_work(&ag->restart_work);
+ break;
+ }
+
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
+
+ bytes_compl += len;
+ ag->dev->stats.tx_bytes += len;
+ ag->dev->stats.tx_packets++;
+
+ dev_kfree_skb_any(skb);
+ ring->buf[i].skb = NULL;
+
+ ring->dirty++;
+ sent++;
+ }
+
+ DBG("%s: %d packets sent out\n", ag->dev->name, sent);
+
+ if (!sent)
+ return 0;
+
+ netdev_completed_queue(ag->dev, sent, bytes_compl);
+ if ((ring->curr - ring->dirty) < (ring->size * 3) / 4)
+ netif_wake_queue(ag->dev);
+
+ return sent;
+}
+
+static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
+{
+ struct net_device *dev = ag->dev;
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ int offset = ag71xx_buffer_offset(ag);
+ unsigned int pktlen_mask = ag->desc_pktlen_mask;
+ int done = 0;
+
+ DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
+ dev->name, limit, ring->curr, ring->dirty);
+
+ while (done < limit) {
+ unsigned int i = ring->curr % ring->size;
+ struct ag71xx_desc *desc = ring->buf[i].desc;
+ struct sk_buff *skb;
+ int pktlen;
+ int err = 0;
+
+ if (ag71xx_desc_empty(desc))
+ break;
+
+ if ((ring->dirty + ring->size) == ring->curr) {
+ ag71xx_assert(0);
+ break;
+ }
+
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
+
+ pktlen = desc->ctrl & pktlen_mask;
+ pktlen -= ETH_FCS_LEN;
+
+ dma_unmap_single(&dev->dev, ring->buf[i].dma_addr,
+ ag->rx_buf_size, DMA_FROM_DEVICE);
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pktlen;
+
+ skb = build_skb(ring->buf[i].rx_buf, 0);
+ if (!skb) {
+ kfree(ring->buf[i].rx_buf);
+ goto next;
+ }
+
+ skb_reserve(skb, offset);
+ skb_put(skb, pktlen);
+
+ if (ag71xx_has_ar8216(ag))
+ err = ag71xx_remove_ar8216_header(ag, skb, pktlen);
+
+ if (err) {
+ dev->stats.rx_dropped++;
+ kfree_skb(skb);
+ } else {
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_receive_skb(skb);
+ }
+
+next:
+ ring->buf[i].rx_buf = NULL;
+ done++;
+
+ ring->curr++;
+ }
+
+ ag71xx_ring_rx_refill(ag);
+
+ DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
+ dev->name, ring->curr, ring->dirty, done);
+
+ return done;
+}
+
+static int ag71xx_poll(struct napi_struct *napi, int limit)
+{
+ struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct net_device *dev = ag->dev;
+ struct ag71xx_ring *rx_ring;
+ unsigned long flags;
+ u32 status;
+ int tx_done;
+ int rx_done;
+
+ pdata->ddr_flush();
+ tx_done = ag71xx_tx_packets(ag);
+
+ DBG("%s: processing RX ring\n", dev->name);
+ rx_done = ag71xx_rx_packets(ag, limit);
+
+ ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
+
+ rx_ring = &ag->rx_ring;
+ if (rx_ring->buf[rx_ring->dirty % rx_ring->size].rx_buf == NULL)
+ goto oom;
+
+ status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
+ if (unlikely(status & RX_STATUS_OF)) {
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
+ dev->stats.rx_fifo_errors++;
+
+ /* restart RX */
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+ }
+
+ if (rx_done < limit) {
+ if (status & RX_STATUS_PR)
+ goto more;
+
+ status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
+ if (status & TX_STATUS_PS)
+ goto more;
+
+ DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
+ dev->name, rx_done, tx_done, limit);
+
+ napi_complete(napi);
+
+ /* enable interrupts */
+ spin_lock_irqsave(&ag->lock, flags);
+ ag71xx_int_enable(ag, AG71XX_INT_POLL);
+ spin_unlock_irqrestore(&ag->lock, flags);
+ return rx_done;
+ }
+
+more:
+ DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
+ dev->name, rx_done, tx_done, limit);
+ return rx_done;
+
+oom:
+ if (netif_msg_rx_err(ag))
+ pr_info("%s: out of memory\n", dev->name);
+
+ mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
+ napi_complete(napi);
+ return 0;
+}
+
+static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct ag71xx *ag = netdev_priv(dev);
+ u32 status;
+
+ status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
+ ag71xx_dump_intr(ag, "raw", status);
+
+ if (unlikely(!status))
+ return IRQ_NONE;
+
+ if (unlikely(status & AG71XX_INT_ERR)) {
+ if (status & AG71XX_INT_TX_BE) {
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
+ dev_err(&dev->dev, "TX BUS error\n");
+ }
+ if (status & AG71XX_INT_RX_BE) {
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
+ dev_err(&dev->dev, "RX BUS error\n");
+ }
+ }
+
+ if (likely(status & AG71XX_INT_POLL)) {
+ ag71xx_int_disable(ag, AG71XX_INT_POLL);
+ DBG("%s: enable polling mode\n", dev->name);
+ napi_schedule(&ag->napi);
+ }
+
+ ag71xx_debugfs_update_int_stats(ag, status);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void ag71xx_netpoll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ ag71xx_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int ag71xx_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ unsigned int max_frame_len;
+
+ max_frame_len = ag71xx_max_frame_len(new_mtu);
+ if (new_mtu < 68 || max_frame_len > ag->max_frame_len)
+ return -EINVAL;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+static const struct net_device_ops ag71xx_netdev_ops = {
+ .ndo_open = ag71xx_open,
+ .ndo_stop = ag71xx_stop,
+ .ndo_start_xmit = ag71xx_hard_start_xmit,
+ .ndo_do_ioctl = ag71xx_do_ioctl,
+ .ndo_tx_timeout = ag71xx_tx_timeout,
+ .ndo_change_mtu = ag71xx_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = ag71xx_netpoll,
+#endif
+};
+
+static const char *ag71xx_get_phy_if_mode_name(phy_interface_t mode)
+{
+ switch (mode) {
+ case PHY_INTERFACE_MODE_MII:
+ return "MII";
+ case PHY_INTERFACE_MODE_GMII:
+ return "GMII";
+ case PHY_INTERFACE_MODE_RMII:
+ return "RMII";
+ case PHY_INTERFACE_MODE_RGMII:
+ return "RGMII";
+ case PHY_INTERFACE_MODE_SGMII:
+ return "SGMII";
+ default:
+ break;
+ }
+
+ return "unknown";
+}
+
+
+static int ag71xx_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct resource *res;
+ struct ag71xx *ag;
+ struct ag71xx_platform_data *pdata;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ if (pdata->mii_bus_dev == NULL && pdata->phy_mask) {
+ dev_err(&pdev->dev, "no MII bus device specified\n");
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ dev = alloc_etherdev(sizeof(*ag));
+ if (!dev) {
+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ if (!pdata->max_frame_len || !pdata->desc_pktlen_mask)
+ return -EINVAL;
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ ag = netdev_priv(dev);
+ ag->pdev = pdev;
+ ag->dev = dev;
+ ag->msg_enable = netif_msg_init(ag71xx_msg_level,
+ AG71XX_DEFAULT_MSG_ENABLE);
+ spin_lock_init(&ag->lock);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
+ if (!res) {
+ dev_err(&pdev->dev, "no mac_base resource found\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1);
+ if (!ag->mac_base) {
+ dev_err(&pdev->dev, "unable to ioremap mac_base\n");
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ dev->irq = platform_get_irq(pdev, 0);
+ err = request_irq(dev->irq, ag71xx_interrupt,
+ IRQF_DISABLED,
+ dev->name, dev);
+ if (err) {
+ dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
+ goto err_unmap_base;
+ }
+
+ dev->base_addr = (unsigned long)ag->mac_base;
+ dev->netdev_ops = &ag71xx_netdev_ops;
+ dev->ethtool_ops = &ag71xx_ethtool_ops;
+
+ INIT_WORK(&ag->restart_work, ag71xx_restart_work_func);
+
+ init_timer(&ag->oom_timer);
+ ag->oom_timer.data = (unsigned long) dev;
+ ag->oom_timer.function = ag71xx_oom_timer_handler;
+
+ ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT;
+ ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT;
+
+ ag->max_frame_len = pdata->max_frame_len;
+ ag->desc_pktlen_mask = pdata->desc_pktlen_mask;
+
+ ag->stop_desc = dma_alloc_coherent(NULL,
+ sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL);
+
+ if (!ag->stop_desc)
+ goto err_free_irq;
+
+ ag->stop_desc->data = 0;
+ ag->stop_desc->ctrl = 0;
+ ag->stop_desc->next = (u32) ag->stop_desc_dma;
+
+ memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
+
+ netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
+
+ ag71xx_dump_regs(ag);
+
+ ag71xx_hw_init(ag);
+
+ ag71xx_dump_regs(ag);
+
+ err = ag71xx_phy_connect(ag);
+ if (err)
+ goto err_free_desc;
+
+ err = ag71xx_debugfs_init(ag);
+ if (err)
+ goto err_phy_disconnect;
+
+ platform_set_drvdata(pdev, dev);
+
+ err = register_netdev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "unable to register net device\n");
+ goto err_debugfs_exit;
+ }
+
+ pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d, mode:%s\n",
+ dev->name, dev->base_addr, dev->irq,
+ ag71xx_get_phy_if_mode_name(pdata->phy_if_mode));
+
+ return 0;
+
+err_debugfs_exit:
+ ag71xx_debugfs_exit(ag);
+err_phy_disconnect:
+ ag71xx_phy_disconnect(ag);
+err_free_desc:
+ dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc,
+ ag->stop_desc_dma);
+err_free_irq:
+ free_irq(dev->irq, dev);
+err_unmap_base:
+ iounmap(ag->mac_base);
+err_free_dev:
+ kfree(dev);
+err_out:
+ platform_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static int ag71xx_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ if (dev) {
+ struct ag71xx *ag = netdev_priv(dev);
+
+ ag71xx_debugfs_exit(ag);
+ ag71xx_phy_disconnect(ag);
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ iounmap(ag->mac_base);
+ kfree(dev);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ag71xx_driver = {
+ .probe = ag71xx_probe,
+ .remove = ag71xx_remove,
+ .driver = {
+ .name = AG71XX_DRV_NAME,
+ }
+};
+
+static int __init ag71xx_module_init(void)
+{
+ int ret;
+
+ ret = ag71xx_debugfs_root_init();
+ if (ret)
+ goto err_out;
+
+ ret = ag71xx_mdio_driver_init();
+ if (ret)
+ goto err_debugfs_exit;
+
+ ret = platform_driver_register(&ag71xx_driver);
+ if (ret)
+ goto err_mdio_exit;
+
+ return 0;
+
+err_mdio_exit:
+ ag71xx_mdio_driver_exit();
+err_debugfs_exit:
+ ag71xx_debugfs_root_exit();
+err_out:
+ return ret;
+}
+
+static void __exit ag71xx_module_exit(void)
+{
+ platform_driver_unregister(&ag71xx_driver);
+ ag71xx_mdio_driver_exit();
+ ag71xx_debugfs_root_exit();
+}
+
+module_init(ag71xx_module_init);
+module_exit(ag71xx_module_exit);
+
+MODULE_VERSION(AG71XX_DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
new file mode 100644
index 0000000..71ae825
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
@@ -0,0 +1,318 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AG71XX_MDIO_RETRY 1000
+#define AG71XX_MDIO_DELAY 5
+
+static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
+ u32 value)
+{
+ void __iomem *r;
+
+ r = am->mdio_base + reg;
+ __raw_writel(value, r);
+
+ /* flush write */
+ (void) __raw_readl(r);
+}
+
+static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
+{
+ return __raw_readl(am->mdio_base + reg);
+}
+
+static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
+{
+ DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
+ am->mii_bus->name,
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
+ DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
+ am->mii_bus->name,
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
+}
+
+static int ag71xx_mdio_wait_busy(struct ag71xx_mdio *am)
+{
+ int i;
+
+ for (i = 0; i < AG71XX_MDIO_RETRY; i++) {
+ u32 busy;
+
+ udelay(AG71XX_MDIO_DELAY);
+
+ busy = ag71xx_mdio_rr(am, AG71XX_REG_MII_IND);
+ if (!busy)
+ return 0;
+
+ udelay(AG71XX_MDIO_DELAY);
+ }
+
+ pr_err("%s: MDIO operation timed out\n", am->mii_bus->name);
+
+ return -ETIMEDOUT;
+}
+
+int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
+{
+ int err;
+ int ret;
+
+ err = ag71xx_mdio_wait_busy(am);
+ if (err)
+ return 0xffff;
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
+ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
+
+ err = ag71xx_mdio_wait_busy(am);
+ if (err)
+ return 0xffff;
+
+ ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+
+ DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
+
+ return ret;
+}
+
+void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val)
+{
+ DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
+ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
+
+ ag71xx_mdio_wait_busy(am);
+}
+
+static const u32 ar71xx_mdio_div_table[] = {
+ 4, 4, 6, 8, 10, 14, 20, 28,
+};
+
+static const u32 ar7240_mdio_div_table[] = {
+ 2, 2, 4, 6, 8, 12, 18, 26, 32, 40, 48, 56, 62, 70, 78, 96,
+};
+
+static const u32 ar933x_mdio_div_table[] = {
+ 4, 4, 6, 8, 10, 14, 20, 28, 34, 42, 50, 58, 66, 74, 82, 98,
+};
+
+static int ag71xx_mdio_get_divider(struct ag71xx_mdio *am, u32 *div)
+{
+ unsigned long ref_clock, mdio_clock;
+ const u32 *table;
+ int ndivs;
+ int i;
+
+ ref_clock = am->pdata->ref_clock;
+ mdio_clock = am->pdata->mdio_clock;
+
+ if (!ref_clock || !mdio_clock)
+ return -EINVAL;
+
+ if (am->pdata->is_ar9330 || am->pdata->is_ar934x) {
+ table = ar933x_mdio_div_table;
+ ndivs = ARRAY_SIZE(ar933x_mdio_div_table);
+ } else if (am->pdata->is_ar7240) {
+ table = ar7240_mdio_div_table;
+ ndivs = ARRAY_SIZE(ar7240_mdio_div_table);
+ } else {
+ table = ar71xx_mdio_div_table;
+ ndivs = ARRAY_SIZE(ar71xx_mdio_div_table);
+ }
+
+ for (i = 0; i < ndivs; i++) {
+ unsigned long t;
+
+ t = ref_clock / table[i];
+ if (t <= mdio_clock) {
+ *div = i;
+ return 0;
+ }
+ }
+
+ dev_err(&am->mii_bus->dev, "no divider found for %lu/%lu\n",
+ ref_clock, mdio_clock);
+ return -ENOENT;
+}
+
+static int ag71xx_mdio_reset(struct mii_bus *bus)
+{
+ struct ag71xx_mdio *am = bus->priv;
+ u32 t;
+ int err;
+
+ err = ag71xx_mdio_get_divider(am, &t);
+ if (err) {
+ /* fallback */
+ if (am->pdata->is_ar7240)
+ t = MII_CFG_CLK_DIV_6;
+ else if (am->pdata->builtin_switch && !am->pdata->is_ar934x)
+ t = MII_CFG_CLK_DIV_10;
+ else if (!am->pdata->builtin_switch && am->pdata->is_ar934x)
+ t = MII_CFG_CLK_DIV_58;
+ else
+ t = MII_CFG_CLK_DIV_28;
+ }
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
+ udelay(100);
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t);
+ udelay(100);
+
+ if (am->pdata->reset)
+ am->pdata->reset(bus);
+
+ return 0;
+}
+
+static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
+{
+ struct ag71xx_mdio *am = bus->priv;
+
+ if (am->pdata->builtin_switch)
+ return ar7240sw_phy_read(bus, addr, reg);
+ else
+ return ag71xx_mdio_mii_read(am, addr, reg);
+}
+
+static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+ struct ag71xx_mdio *am = bus->priv;
+
+ if (am->pdata->builtin_switch)
+ ar7240sw_phy_write(bus, addr, reg, val);
+ else
+ ag71xx_mdio_mii_write(am, addr, reg, val);
+ return 0;
+}
+
+static int ag71xx_mdio_probe(struct platform_device *pdev)
+{
+ struct ag71xx_mdio_platform_data *pdata;
+ struct ag71xx_mdio *am;
+ struct resource *res;
+ int i;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ return -EINVAL;
+ }
+
+ am = kzalloc(sizeof(*am), GFP_KERNEL);
+ if (!am) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ am->pdata = pdata;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no iomem resource found\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
+ if (!am->mdio_base) {
+ dev_err(&pdev->dev, "unable to ioremap registers\n");
+ err = -ENOMEM;
+ goto err_free_mdio;
+ }
+
+ am->mii_bus = mdiobus_alloc();
+ if (am->mii_bus == NULL) {
+ err = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ am->mii_bus->name = "ag71xx_mdio";
+ am->mii_bus->read = ag71xx_mdio_read;
+ am->mii_bus->write = ag71xx_mdio_write;
+ am->mii_bus->reset = ag71xx_mdio_reset;
+ am->mii_bus->irq = am->mii_irq;
+ am->mii_bus->priv = am;
+ am->mii_bus->parent = &pdev->dev;
+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
+ am->mii_bus->phy_mask = pdata->phy_mask;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ am->mii_irq[i] = PHY_POLL;
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
+
+ err = mdiobus_register(am->mii_bus);
+ if (err)
+ goto err_free_bus;
+
+ ag71xx_mdio_dump_regs(am);
+
+ platform_set_drvdata(pdev, am);
+ return 0;
+
+err_free_bus:
+ mdiobus_free(am->mii_bus);
+err_iounmap:
+ iounmap(am->mdio_base);
+err_free_mdio:
+ kfree(am);
+err_out:
+ return err;
+}
+
+static int ag71xx_mdio_remove(struct platform_device *pdev)
+{
+ struct ag71xx_mdio *am = platform_get_drvdata(pdev);
+
+ if (am) {
+ mdiobus_unregister(am->mii_bus);
+ mdiobus_free(am->mii_bus);
+ iounmap(am->mdio_base);
+ kfree(am);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ag71xx_mdio_driver = {
+ .probe = ag71xx_mdio_probe,
+ .remove = ag71xx_mdio_remove,
+ .driver = {
+ .name = "ag71xx-mdio",
+ }
+};
+
+int __init ag71xx_mdio_driver_init(void)
+{
+ return platform_driver_register(&ag71xx_mdio_driver);
+}
+
+void ag71xx_mdio_driver_exit(void)
+{
+ platform_driver_unregister(&ag71xx_mdio_driver);
+}
diff --git a/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
new file mode 100644
index 0000000..9de77e9
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
@@ -0,0 +1,235 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <***@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <***@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+static void ag71xx_phy_link_adjust(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct phy_device *phydev = ag->phy_dev;
+ unsigned long flags;
+ int status_change = 0;
+
+ spin_lock_irqsave(&ag->lock, flags);
+
+ if (phydev->link) {
+ if (ag->duplex != phydev->duplex
+ || ag->speed != phydev->speed) {
+ status_change = 1;
+ }
+ }
+
+ if (phydev->link != ag->link)
+ status_change = 1;
+
+ ag->link = phydev->link;
+ ag->duplex = phydev->duplex;
+ ag->speed = phydev->speed;
+
+ if (status_change)
+ ag71xx_link_adjust(ag);
+
+ spin_unlock_irqrestore(&ag->lock, flags);
+}
+
+void ag71xx_phy_start(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ if (ag->phy_dev) {
+ phy_start(ag->phy_dev);
+ } else if (pdata->mii_bus_dev && pdata->switch_data) {
+ ag71xx_ar7240_start(ag);
+ } else {
+ ag->link = 1;
+ ag71xx_link_adjust(ag);
+ }
+}
+
+void ag71xx_phy_stop(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ unsigned long flags;
+
+ if (ag->phy_dev)
+ phy_stop(ag->phy_dev);
+ else if (pdata->mii_bus_dev && pdata->switch_data)
+ ag71xx_ar7240_stop(ag);
+
+ spin_lock_irqsave(&ag->lock, flags);
+ if (ag->link) {
+ ag->link = 0;
+ ag71xx_link_adjust(ag);
+ }
+ spin_unlock_irqrestore(&ag->lock, flags);
+}
+
+static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
+{
+ struct device *dev = &ag->pdev->dev;
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ int ret = 0;
+
+ /* use fixed settings */
+ switch (pdata->speed) {
+ case SPEED_10:
+ case SPEED_100:
+ case SPEED_1000:
+ break;
+ default:
+ dev_err(dev, "invalid speed specified\n");
+ ret = -EINVAL;
+ break;
+ }
+
+ dev_dbg(dev, "using fixed link parameters\n");
+
+ ag->duplex = pdata->duplex;
+ ag->speed = pdata->speed;
+
+ return ret;
+}
+
+static int ag71xx_phy_connect_multi(struct ag71xx *ag)
+{
+ struct device *dev = &ag->pdev->dev;
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct phy_device *phydev = NULL;
+ int phy_addr;
+ int ret = 0;
+
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ if (!(pdata->phy_mask & (1 << phy_addr)))
+ continue;
+
+ if (ag->mii_bus->phy_map[phy_addr] == NULL)
+ continue;
+
+ DBG("%s: PHY found at %s, uid=%08x\n",
+ dev_name(dev),
+ dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
+ ag->mii_bus->phy_map[phy_addr]->phy_id);
+
+ if (phydev == NULL)
+ phydev = ag->mii_bus->phy_map[phy_addr];
+ }
+
+ if (!phydev) {
+ dev_err(dev, "no PHY found with phy_mask=%08x\n",
+ pdata->phy_mask);
+ return -ENODEV;
+ }
+
+ ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev),
+ &ag71xx_phy_link_adjust,
+ pdata->phy_if_mode);
+
+ if (IS_ERR(ag->phy_dev)) {
+ dev_err(dev, "could not connect to PHY at %s\n",
+ dev_name(&phydev->dev));
+ return PTR_ERR(ag->phy_dev);
+ }
+
+ /* mask with MAC supported features */
+ if (pdata->has_gbit)
+ phydev->supported &= PHY_GBIT_FEATURES;
+ else
+ phydev->supported &= PHY_BASIC_FEATURES;
+
+ phydev->advertising = phydev->supported;
+
+ dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
+ dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name);
+
+ ag->link = 0;
+ ag->speed = 0;
+ ag->duplex = -1;
+
+ return ret;
+}
+
+static int dev_is_class(struct device *dev, void *class)
+{
+ if (dev->class != NULL && !strcmp(dev->class->name, class))
+ return 1;
+
+ return 0;
+}
+
+static struct device *dev_find_class(struct device *parent, char *class)
+{
+ if (dev_is_class(parent, class)) {
+ get_device(parent);
+ return parent;
+ }
+
+ return device_find_child(parent, class, dev_is_class);
+}
+
+static struct mii_bus *dev_to_mii_bus(struct device *dev)
+{
+ struct device *d;
+
+ d = dev_find_class(dev, "mdio_bus");
+ if (d != NULL) {
+ struct mii_bus *bus;
+
+ bus = to_mii_bus(d);
+ put_device(d);
+
+ return bus;
+ }
+
+ return NULL;
+}
+
+int ag71xx_phy_connect(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ if (pdata->mii_bus_dev == NULL ||
+ pdata->mii_bus_dev->bus == NULL )
+ return ag71xx_phy_connect_fixed(ag);
+
+ ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
+ if (ag->mii_bus == NULL) {
+ dev_err(&ag->pdev->dev, "unable to find MII bus on device '%s'\n",
+ dev_name(pdata->mii_bus_dev));
+ return -ENODEV;
+ }
+
+ /* Reset the mdio bus explicitly */
+ if (ag->mii_bus->reset) {
+ mutex_lock(&ag->mii_bus->mdio_lock);
+ ag->mii_bus->reset(ag->mii_bus);
+ mutex_unlock(&ag->mii_bus->mdio_lock);
+ }
+
+ if (pdata->switch_data)
+ return ag71xx_ar7240_init(ag);
+
+ if (pdata->phy_mask)
+ return ag71xx_phy_connect_multi(ag);
+
+ return ag71xx_phy_connect_fixed(ag);
+}
+
+void ag71xx_phy_disconnect(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ if (pdata->switch_data)
+ ag71xx_ar7240_cleanup(ag);
+ else if (ag->phy_dev)
+ phy_disconnect(ag->phy_dev);
+}
diff --git a/target/linux/ar71xx/files-3.14/drivers/spi/spi-ap83.c b/target/linux/ar71xx/files-3.14/drivers/spi/spi-ap83.c
new file mode 100644
index 0000000..33843a6
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/spi/spi-ap83.c
@@ -0,0 +1,283 @@
+/*
+ * Atheros AP83 board specific SPI Controller driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#define DRV_DESC "Atheros AP83 board SPI Controller driver"
+#define DRV_VERSION "0.1.0"
+#define DRV_NAME "ap83-spi"
+
+#define AP83_SPI_CLK_HIGH (1 << 23)
+#define AP83_SPI_CLK_LOW 0
+#define AP83_SPI_MOSI_HIGH (1 << 22)
+#define AP83_SPI_MOSI_LOW 0
+
+#define AP83_SPI_GPIO_CS 1
+#define AP83_SPI_GPIO_MISO 3
+
+struct ap83_spi {
+ struct spi_bitbang bitbang;
+ void __iomem *base;
+ u32 addr;
+
+ struct platform_device *pdev;
+};
+
+static inline u32 ap83_spi_rr(struct ap83_spi *sp, u32 reg)
+{
+ return __raw_readl(sp->base + reg);
+}
+
+static inline struct ap83_spi *spidev_to_sp(struct spi_device *spi)
+{
+ return spi_master_get_devdata(spi->master);
+}
+
+static inline void setsck(struct spi_device *spi, int val)
+{
+ struct ap83_spi *sp = spidev_to_sp(spi);
+
+ if (val)
+ sp->addr |= AP83_SPI_CLK_HIGH;
+ else
+ sp->addr &= ~AP83_SPI_CLK_HIGH;
+
+ dev_dbg(&spi->dev, "addr=%08x, SCK set to %s\n",
+ sp->addr, (val) ? "HIGH" : "LOW");
+
+ ap83_spi_rr(sp, sp->addr);
+}
+
+static inline void setmosi(struct spi_device *spi, int val)
+{
+ struct ap83_spi *sp = spidev_to_sp(spi);
+
+ if (val)
+ sp->addr |= AP83_SPI_MOSI_HIGH;
+ else
+ sp->addr &= ~AP83_SPI_MOSI_HIGH;
+
+ dev_dbg(&spi->dev, "addr=%08x, MOSI set to %s\n",
+ sp->addr, (val) ? "HIGH" : "LOW");
+
+ ap83_spi_rr(sp, sp->addr);
+}
+
+static inline u32 getmiso(struct spi_device *spi)
+{
+ u32 ret;
+
+ ret = gpio_get_value(AP83_SPI_GPIO_MISO) ? 1 : 0;
+ dev_dbg(&spi->dev, "get MISO: %d\n", ret);
+
+ return ret;
+}
+
+static inline void do_spidelay(struct spi_device *spi, unsigned nsecs)
+{
+ ndelay(nsecs);
+}
+
+static void ap83_spi_chipselect(struct spi_device *spi, int on)
+{
+ struct ap83_spi *sp = spidev_to_sp(spi);
+
+ dev_dbg(&spi->dev, "set CS to %d\n", (on) ? 0 : 1);
+
+ if (on) {
+ ath79_flash_acquire();
+
+ sp->addr = 0;
+ ap83_spi_rr(sp, sp->addr);
+
+ gpio_set_value(AP83_SPI_GPIO_CS, 0);
+ } else {
+ gpio_set_value(AP83_SPI_GPIO_CS, 1);
+ ath79_flash_release();
+ }
+}
+
+#define spidelay(nsecs) \
+ do { \
+ /* Steal the spi_device pointer from our caller. \
+ * The bitbang-API should probably get fixed here... */ \
+ do_spidelay(spi, nsecs); \
+ } while (0)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+#include "spi-bitbang-txrx.h"
+
+static u32 ap83_spi_txrx_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
+}
+
+static u32 ap83_spi_txrx_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
+}
+
+static u32 ap83_spi_txrx_mode2(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits);
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
+}
+
+static u32 ap83_spi_txrx_mode3(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits);
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
+}
+
+static int ap83_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct ap83_spi *sp;
+ struct ap83_spi_platform_data *pdata;
+ struct resource *r;
+ int ret;
+
+ ret = gpio_request(AP83_SPI_GPIO_MISO, "spi-miso");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed for MISO\n");
+ return ret;
+ }
+
+ ret = gpio_request(AP83_SPI_GPIO_CS, "spi-cs");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed for CS\n");
+ goto err_free_miso;
+ }
+
+ ret = gpio_direction_input(AP83_SPI_GPIO_MISO);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set direction of MISO\n");
+ goto err_free_cs;
+ }
+
+ ret = gpio_direction_output(AP83_SPI_GPIO_CS, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set direction of CS\n");
+ goto err_free_cs;
+ }
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "failed to allocate spi master\n");
+ return -ENOMEM;
+ }
+
+ sp = spi_master_get_devdata(master);
+ platform_set_drvdata(pdev, sp);
+
+ pdata = pdev->dev.platform_data;
+
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.chipselect = ap83_spi_chipselect;
+ sp->bitbang.txrx_word[SPI_MODE_0] = ap83_spi_txrx_mode0;
+ sp->bitbang.txrx_word[SPI_MODE_1] = ap83_spi_txrx_mode1;
+ sp->bitbang.txrx_word[SPI_MODE_2] = ap83_spi_txrx_mode2;
+ sp->bitbang.txrx_word[SPI_MODE_3] = ap83_spi_txrx_mode3;
+
+ sp->bitbang.master->bus_num = pdev->id;
+ sp->bitbang.master->num_chipselect = 1;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ ret = -ENOENT;
+ goto err_spi_put;
+ }
+
+ sp->base = ioremap_nocache(r->start, r->end - r->start + 1);
+ if (!sp->base) {
+ ret = -ENXIO;
+ goto err_spi_put;
+ }
+
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (!ret)
+ goto err_unmap;
+
+ dev_info(&pdev->dev, "AP83 SPI adapter at %08x\n", r->start);
+
+ return 0;
+
+err_unmap:
+ iounmap(sp->base);
+err_spi_put:
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(sp->bitbang.master);
+
+err_free_cs:
+ gpio_free(AP83_SPI_GPIO_CS);
+err_free_miso:
+ gpio_free(AP83_SPI_GPIO_MISO);
+ return ret;
+}
+
+static int ap83_spi_remove(struct platform_device *pdev)
+{
+ struct ap83_spi *sp = platform_get_drvdata(pdev);
+
+ spi_bitbang_stop(&sp->bitbang);
+ iounmap(sp->base);
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(sp->bitbang.master);
+
+ return 0;
+}
+
+static struct platform_driver ap83_spi_drv = {
+ .probe = ap83_spi_probe,
+ .remove = ap83_spi_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ap83_spi_init(void)
+{
+ return platform_driver_register(&ap83_spi_drv);
+}
+module_init(ap83_spi_init);
+
+static void __exit ap83_spi_exit(void)
+{
+ platform_driver_unregister(&ap83_spi_drv);
+}
+module_exit(ap83_spi_exit);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx-cpld.c b/target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx-cpld.c
new file mode 100644
index 0000000..a8d5282
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx-cpld.c
@@ -0,0 +1,441 @@
+/*
+ * SPI driver for the CPLD chip on the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ath79/rb4xx_cpld.h>
+
+#define DRV_NAME "spi-rb4xx-cpld"
+#define DRV_DESC "RB4xx CPLD driver"
+#define DRV_VERSION "0.1.0"
+
+#define CPLD_CMD_WRITE_NAND 0x08 /* send cmd, n x send data, send indle */
+#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */
+#define CPLD_CMD_READ_NAND 0x0a /* send cmd, send idle, n x read data */
+#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */
+#define CPLD_CMD_LED5_ON 0x0c /* send cmd */
+#define CPLD_CMD_LED5_OFF 0x0d /* send cmd */
+
+struct rb4xx_cpld {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct gpio_chip chip;
+ unsigned int config;
+};
+
+static struct rb4xx_cpld *rb4xx_cpld;
+
+static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip)
+{
+ return container_of(chip, struct rb4xx_cpld, chip);
+}
+
+static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd)
+{
+ struct spi_transfer t[1];
+ struct spi_message m;
+ unsigned char tx_buf[1];
+ int err;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = tx_buf;
+ t[0].len = sizeof(tx_buf);
+ spi_message_add_tail(&t[0], &m);
+
+ tx_buf[0] = cmd;
+
+ err = spi_sync(cpld->spi, &m);
+ return err;
+}
+
+static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config)
+{
+ struct spi_transfer t[1];
+ struct spi_message m;
+ unsigned char cmd[2];
+ int err;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ cmd[0] = CPLD_CMD_WRITE_CFG;
+ cmd[1] = config;
+
+ err = spi_sync(cpld->spi, &m);
+ return err;
+}
+
+static int __rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, unsigned mask,
+ unsigned value)
+{
+ unsigned int config;
+ int err;
+
+ config = cpld->config & ~mask;
+ config |= value;
+
+ if ((cpld->config ^ config) & 0xff) {
+ err = rb4xx_cpld_write_cfg(cpld, config);
+ if (err)
+ return err;
+ }
+
+ if ((cpld->config ^ config) & CPLD_CFG_nLED5) {
+ err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON :
+ CPLD_CMD_LED5_OFF);
+ if (err)
+ return err;
+ }
+
+ cpld->config = config;
+ return 0;
+}
+
+int rb4xx_cpld_change_cfg(unsigned mask, unsigned value)
+{
+ int ret;
+
+ if (rb4xx_cpld == NULL)
+ return -ENODEV;
+
+ mutex_lock(&rb4xx_cpld->lock);
+ ret = __rb4xx_cpld_change_cfg(rb4xx_cpld, mask, value);
+ mutex_unlock(&rb4xx_cpld->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rb4xx_cpld_change_cfg);
+
+int rb4xx_cpld_read_from(unsigned addr, unsigned char *rx_buf,
+ const unsigned char *verify_buf, unsigned count)
+{
+ const unsigned char cmd[5] = {
+ CPLD_CMD_READ_FAST,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ addr & 0xff,
+ 0
+ };
+ struct spi_transfer t[2] = {
+ {
+ .tx_buf = &cmd,
+ .len = 5,
+ },
+ {
+ .tx_buf = verify_buf,
+ .rx_buf = rx_buf,
+ .len = count,
+ .verify = (verify_buf != NULL),
+ },
+ };
+ struct spi_message m;
+
+ if (rb4xx_cpld == NULL)
+ return -ENODEV;
+
+ spi_message_init(&m);
+ m.fast_read = 1;
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+ return spi_sync(rb4xx_cpld->spi, &m);
+}
+EXPORT_SYMBOL_GPL(rb4xx_cpld_read_from);
+
+#if 0
+int rb4xx_cpld_read(unsigned char *buf, unsigned char *verify_buf,
+ unsigned count)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ unsigned char cmd[2];
+
+ if (rb4xx_cpld == NULL)
+ return -ENODEV;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ /* send command */
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ cmd[0] = CPLD_CMD_READ_NAND;
+ cmd[1] = 0;
+
+ /* read data */
+ t[1].rx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ return spi_sync(rb4xx_cpld->spi, &m);
+}
+#else
+int rb4xx_cpld_read(unsigned char *rx_buf, const unsigned char *verify_buf,
+ unsigned count)
+{
+ static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 };
+ struct spi_transfer t[2] = {
+ {
+ .tx_buf = &cmd,
+ .len = 2,
+ }, {
+ .tx_buf = verify_buf,
+ .rx_buf = rx_buf,
+ .len = count,
+ .verify = (verify_buf != NULL),
+ },
+ };
+ struct spi_message m;
+
+ if (rb4xx_cpld == NULL)
+ return -ENODEV;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+ return spi_sync(rb4xx_cpld->spi, &m);
+}
+#endif
+EXPORT_SYMBOL_GPL(rb4xx_cpld_read);
+
+int rb4xx_cpld_write(const unsigned char *buf, unsigned count)
+{
+#if 0
+ struct spi_transfer t[3];
+ struct spi_message m;
+ unsigned char cmd[1];
+
+ if (rb4xx_cpld == NULL)
+ return -ENODEV;
+
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ /* send command */
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ cmd[0] = CPLD_CMD_WRITE_NAND;
+
+ /* write data */
+ t[1].tx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ /* send idle */
+ t[2].len = 1;
+ spi_message_add_tail(&t[2], &m);
+
+ return spi_sync(rb4xx_cpld->spi, &m);
+#else
+ static const unsigned char cmd = CPLD_CMD_WRITE_NAND;
+ struct spi_transfer t[3] = {
+ {
+ .tx_buf = &cmd,
+ .len = 1,
+ }, {
+ .tx_buf = buf,
+ .len = count,
+ .fast_write = 1,
+ }, {
+ .len = 1,
+ .fast_write = 1,
+ },
+ };
+ struct spi_message m;
+
+ if (rb4xx_cpld == NULL)
+ return -ENODEV;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+ spi_message_add_tail(&t[2], &m);
+ return spi_sync(rb4xx_cpld->spi, &m);
+#endif
+}
+EXPORT_SYMBOL_GPL(rb4xx_cpld_write);
+
+static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
+ int ret;
+
+ mutex_lock(&cpld->lock);
+ ret = (cpld->config >> offset) & 1;
+ mutex_unlock(&cpld->lock);
+
+ return ret;
+}
+
+static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
+
+ mutex_lock(&cpld->lock);
+ __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
+ mutex_unlock(&cpld->lock);
+}
+
+static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return -EOPNOTSUPP;
+}
+
+static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset,
+ int value)
+{
+ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
+ int ret;
+
+ mutex_lock(&cpld->lock);
+ ret = __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
+ mutex_unlock(&cpld->lock);
+
+ return ret;
+}
+
+static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base)
+{
+ int err;
+
+ /* init config */
+ cpld->config = CPLD_CFG_nLED1 | CPLD_CFG_nLED2 | CPLD_CFG_nLED3 |
+ CPLD_CFG_nLED4 | CPLD_CFG_nCE;
+ rb4xx_cpld_write_cfg(cpld, cpld->config);
+
+ /* setup GPIO chip */
+ cpld->chip.label = DRV_NAME;
+
+ cpld->chip.get = rb4xx_cpld_gpio_get;
+ cpld->chip.set = rb4xx_cpld_gpio_set;
+ cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input;
+ cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output;
+
+ cpld->chip.base = base;
+ cpld->chip.ngpio = CPLD_NUM_GPIOS;
+ cpld->chip.can_sleep = 1;
+ cpld->chip.dev = &cpld->spi->dev;
+ cpld->chip.owner = THIS_MODULE;
+
+ err = gpiochip_add(&cpld->chip);
+ if (err)
+ dev_err(&cpld->spi->dev, "adding GPIO chip failed, err=%d\n",
+ err);
+
+ return err;
+}
+
+static int rb4xx_cpld_probe(struct spi_device *spi)
+{
+ struct rb4xx_cpld *cpld;
+ struct rb4xx_cpld_platform_data *pdata;
+ int err;
+
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ dev_dbg(&spi->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ cpld = kzalloc(sizeof(*cpld), GFP_KERNEL);
+ if (!cpld) {
+ dev_err(&spi->dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&cpld->lock);
+ cpld->spi = spi_dev_get(spi);
+ dev_set_drvdata(&spi->dev, cpld);
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ err = spi_setup(spi);
+ if (err) {
+ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
+ goto err_drvdata;
+ }
+
+ err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base);
+ if (err)
+ goto err_drvdata;
+
+ rb4xx_cpld = cpld;
+
+ return 0;
+
+err_drvdata:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(cpld);
+
+ return err;
+}
+
+static int rb4xx_cpld_remove(struct spi_device *spi)
+{
+ struct rb4xx_cpld *cpld;
+
+ rb4xx_cpld = NULL;
+ cpld = dev_get_drvdata(&spi->dev);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(cpld);
+
+ return 0;
+}
+
+static struct spi_driver rb4xx_cpld_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = rb4xx_cpld_probe,
+ .remove = rb4xx_cpld_remove,
+};
+
+static int __init rb4xx_cpld_init(void)
+{
+ return spi_register_driver(&rb4xx_cpld_driver);
+}
+module_init(rb4xx_cpld_init);
+
+static void __exit rb4xx_cpld_exit(void)
+{
+ spi_unregister_driver(&rb4xx_cpld_driver);
+}
+module_exit(rb4xx_cpld_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx.c b/target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx.c
new file mode 100644
index 0000000..56260ff
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/spi/spi-rb4xx.c
@@ -0,0 +1,507 @@
+/*
+ * SPI controller driver for the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#define DRV_NAME "rb4xx-spi"
+#define DRV_DESC "Mikrotik RB4xx SPI controller driver"
+#define DRV_VERSION "0.1.0"
+
+#define SPI_CTRL_FASTEST 0x40
+#define SPI_FLASH_HZ 33333334
+#define SPI_CPLD_HZ 33333334
+
+#define CPLD_CMD_READ_FAST 0x0b
+
+#undef RB4XX_SPI_DEBUG
+
+struct rb4xx_spi {
+ void __iomem *base;
+ struct spi_master *master;
+
+ unsigned spi_ctrl_flash;
+ unsigned spi_ctrl_fread;
+
+ struct clk *ahb_clk;
+ unsigned long ahb_freq;
+
+ spinlock_t lock;
+ struct list_head queue;
+ int busy:1;
+ int cs_wait;
+};
+
+static unsigned spi_clk_low = AR71XX_SPI_IOC_CS1;
+
+#ifdef RB4XX_SPI_DEBUG
+static inline void do_spi_delay(void)
+{
+ ndelay(20000);
+}
+#else
+static inline void do_spi_delay(void) { }
+#endif
+
+static inline void do_spi_init(struct spi_device *spi)
+{
+ unsigned cs = AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1;
+
+ if (!(spi->mode & SPI_CS_HIGH))
+ cs ^= (spi->chip_select == 2) ? AR71XX_SPI_IOC_CS1 :
+ AR71XX_SPI_IOC_CS0;
+
+ spi_clk_low = cs;
+}
+
+static inline void do_spi_finish(void __iomem *base)
+{
+ do_spi_delay();
+ __raw_writel(AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1,
+ base + AR71XX_SPI_REG_IOC);
+}
+
+static inline void do_spi_clk(void __iomem *base, int bit)
+{
+ unsigned bval = spi_clk_low | ((bit & 1) ? AR71XX_SPI_IOC_DO : 0);
+
+ do_spi_delay();
+ __raw_writel(bval, base + AR71XX_SPI_REG_IOC);
+ do_spi_delay();
+ __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
+}
+
+static void do_spi_byte(void __iomem *base, unsigned char byte)
+{
+ do_spi_clk(base, byte >> 7);
+ do_spi_clk(base, byte >> 6);
+ do_spi_clk(base, byte >> 5);
+ do_spi_clk(base, byte >> 4);
+ do_spi_clk(base, byte >> 3);
+ do_spi_clk(base, byte >> 2);
+ do_spi_clk(base, byte >> 1);
+ do_spi_clk(base, byte);
+
+ pr_debug("spi_byte sent 0x%02x got 0x%02x\n",
+ (unsigned)byte,
+ (unsigned char)__raw_readl(base + AR71XX_SPI_REG_RDS));
+}
+
+static inline void do_spi_clk_fast(void __iomem *base, unsigned bit1,
+ unsigned bit2)
+{
+ unsigned bval = (spi_clk_low |
+ ((bit1 & 1) ? AR71XX_SPI_IOC_DO : 0) |
+ ((bit2 & 1) ? AR71XX_SPI_IOC_CS2 : 0));
+ do_spi_delay();
+ __raw_writel(bval, base + AR71XX_SPI_REG_IOC);
+ do_spi_delay();
+ __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
+}
+
+static void do_spi_byte_fast(void __iomem *base, unsigned char byte)
+{
+ do_spi_clk_fast(base, byte >> 7, byte >> 6);
+ do_spi_clk_fast(base, byte >> 5, byte >> 4);
+ do_spi_clk_fast(base, byte >> 3, byte >> 2);
+ do_spi_clk_fast(base, byte >> 1, byte >> 0);
+
+ pr_debug("spi_byte_fast sent 0x%02x got 0x%02x\n",
+ (unsigned)byte,
+ (unsigned char) __raw_readl(base + AR71XX_SPI_REG_RDS));
+}
+
+static int rb4xx_spi_txrx(void __iomem *base, struct spi_transfer *t)
+{
+ const unsigned char *rxv_ptr = NULL;
+ const unsigned char *tx_ptr = t->tx_buf;
+ unsigned char *rx_ptr = t->rx_buf;
+ unsigned i;
+
+ pr_debug("spi_txrx len %u tx %u rx %u\n",
+ t->len,
+ (t->tx_buf ? 1 : 0),
+ (t->rx_buf ? 1 : 0));
+
+ if (t->verify) {
+ rxv_ptr = tx_ptr;
+ tx_ptr = NULL;
+ }
+
+ for (i = 0; i < t->len; ++i) {
+ unsigned char sdata = tx_ptr ? tx_ptr[i] : 0;
+
+ if (t->fast_write)
+ do_spi_byte_fast(base, sdata);
+ else
+ do_spi_byte(base, sdata);
+
+ if (rx_ptr) {
+ rx_ptr[i] = __raw_readl(base + AR71XX_SPI_REG_RDS) & 0xff;
+ } else if (rxv_ptr) {
+ unsigned char c = __raw_readl(base + AR71XX_SPI_REG_RDS);
+ if (rxv_ptr[i] != c)
+ return i;
+ }
+ }
+
+ return i;
+}
+
+static int rb4xx_spi_read_fast(struct rb4xx_spi *rbspi,
+ struct spi_message *m)
+{
+ struct spi_transfer *t;
+ const unsigned char *tx_ptr;
+ unsigned addr;
+ void __iomem *base = rbspi->base;
+
+ /* check for exactly two transfers */
+ if (list_empty(&m->transfers) ||
+ list_is_last(m->transfers.next, &m->transfers) ||
+ !list_is_last(m->transfers.next->next, &m->transfers)) {
+ return -1;
+ }
+
+ /* first transfer contains command and address */
+ t = list_entry(m->transfers.next,
+ struct spi_transfer, transfer_list);
+
+ if (t->len != 5 || t->tx_buf == NULL)
+ return -1;
+
+ tx_ptr = t->tx_buf;
+ if (tx_ptr[0] != CPLD_CMD_READ_FAST)
+ return -1;
+
+ addr = tx_ptr[1];
+ addr = tx_ptr[2] | (addr << 8);
+ addr = tx_ptr[3] | (addr << 8);
+ addr += (unsigned) base;
+
+ m->actual_length += t->len;
+
+ /* second transfer contains data itself */
+ t = list_entry(m->transfers.next->next,
+ struct spi_transfer, transfer_list);
+
+ if (t->tx_buf && !t->verify)
+ return -1;
+
+ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
+ __raw_writel(rbspi->spi_ctrl_fread, base + AR71XX_SPI_REG_CTRL);
+ __raw_writel(0, base + AR71XX_SPI_REG_FS);
+
+ if (t->rx_buf) {
+ memcpy(t->rx_buf, (const void *)addr, t->len);
+ } else if (t->tx_buf) {
+ unsigned char buf[t->len];
+ memcpy(buf, (const void *)addr, t->len);
+ if (memcmp(t->tx_buf, buf, t->len) != 0)
+ m->status = -EMSGSIZE;
+ }
+ m->actual_length += t->len;
+
+ if (rbspi->spi_ctrl_flash != rbspi->spi_ctrl_fread) {
+ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
+ __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL);
+ __raw_writel(0, base + AR71XX_SPI_REG_FS);
+ }
+
+ return 0;
+}
+
+static int rb4xx_spi_msg(struct rb4xx_spi *rbspi, struct spi_message *m)
+{
+ struct spi_transfer *t = NULL;
+ void __iomem *base = rbspi->base;
+
+ m->status = 0;
+ if (list_empty(&m->transfers))
+ return -1;
+
+ if (m->fast_read)
+ if (rb4xx_spi_read_fast(rbspi, m) == 0)
+ return -1;
+
+ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
+ __raw_writel(SPI_CTRL_FASTEST, base + AR71XX_SPI_REG_CTRL);
+ do_spi_init(m->spi);
+
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ int len;
+
+ len = rb4xx_spi_txrx(base, t);
+ if (len != t->len) {
+ m->status = -EMSGSIZE;
+ break;
+ }
+ m->actual_length += len;
+
+ if (t->cs_change) {
+ if (list_is_last(&t->transfer_list, &m->transfers)) {
+ /* wait for continuation */
+ return m->spi->chip_select;
+ }
+ do_spi_finish(base);
+ ndelay(100);
+ }
+ }
+
+ do_spi_finish(base);
+ __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL);
+ __raw_writel(0, base + AR71XX_SPI_REG_FS);
+ return -1;
+}
+
+static void rb4xx_spi_process_queue_locked(struct rb4xx_spi *rbspi,
+ unsigned long *flags)
+{
+ int cs = rbspi->cs_wait;
+
+ rbspi->busy = 1;
+ while (!list_empty(&rbspi->queue)) {
+ struct spi_message *m;
+
+ list_for_each_entry(m, &rbspi->queue, queue)
+ if (cs < 0 || cs == m->spi->chip_select)
+ break;
+
+ if (&m->queue == &rbspi->queue)
+ break;
+
+ list_del_init(&m->queue);
+ spin_unlock_irqrestore(&rbspi->lock, *flags);
+
+ cs = rb4xx_spi_msg(rbspi, m);
+ m->complete(m->context);
+
+ spin_lock_irqsave(&rbspi->lock, *flags);
+ }
+
+ rbspi->cs_wait = cs;
+ rbspi->busy = 0;
+
+ if (cs >= 0) {
+ /* TODO: add timer to unlock cs after 1s inactivity */
+ }
+}
+
+static int rb4xx_spi_transfer(struct spi_device *spi,
+ struct spi_message *m)
+{
+ struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+ spin_lock_irqsave(&rbspi->lock, flags);
+ list_add_tail(&m->queue, &rbspi->queue);
+ if (rbspi->busy ||
+ (rbspi->cs_wait >= 0 && rbspi->cs_wait != m->spi->chip_select)) {
+ /* job will be done later */
+ spin_unlock_irqrestore(&rbspi->lock, flags);
+ return 0;
+ }
+
+ /* process job in current context */
+ rb4xx_spi_process_queue_locked(rbspi, &flags);
+ spin_unlock_irqrestore(&rbspi->lock, flags);
+
+ return 0;
+}
+
+static int rb4xx_spi_setup(struct spi_device *spi)
+{
+ struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ if (spi->mode & ~(SPI_CS_HIGH)) {
+ dev_err(&spi->dev, "mode %x not supported\n",
+ (unsigned) spi->mode);
+ return -EINVAL;
+ }
+
+ if (spi->bits_per_word != 8 && spi->bits_per_word != 0) {
+ dev_err(&spi->dev, "bits_per_word %u not supported\n",
+ (unsigned) spi->bits_per_word);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&rbspi->lock, flags);
+ if (rbspi->cs_wait == spi->chip_select && !rbspi->busy) {
+ rbspi->cs_wait = -1;
+ rb4xx_spi_process_queue_locked(rbspi, &flags);
+ }
+ spin_unlock_irqrestore(&rbspi->lock, flags);
+
+ return 0;
+}
+
+static unsigned get_spi_ctrl(struct rb4xx_spi *rbspi, unsigned hz_max,
+ const char *name)
+{
+ unsigned div;
+
+ div = (rbspi->ahb_freq - 1) / (2 * hz_max);
+
+ /*
+ * CPU has a bug at (div == 0) - first bit read is random
+ */
+ if (div == 0)
+ ++div;
+
+ if (name) {
+ unsigned ahb_khz = (rbspi->ahb_freq + 500) / 1000;
+ unsigned div_real = 2 * (div + 1);
+ pr_debug("rb4xx: %s SPI clock %u kHz (AHB %u kHz / %u)\n",
+ name,
+ ahb_khz / div_real,
+ ahb_khz, div_real);
+ }
+
+ return SPI_CTRL_FASTEST + div;
+}
+
+static int rb4xx_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct rb4xx_spi *rbspi;
+ struct resource *r;
+ int err = 0;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "no memory for spi_master\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ master->bus_num = 0;
+ master->num_chipselect = 3;
+ master->setup = rb4xx_spi_setup;
+ master->transfer = rb4xx_spi_transfer;
+
+ rbspi = spi_master_get_devdata(master);
+
+ rbspi->ahb_clk = clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(rbspi->ahb_clk)) {
+ err = PTR_ERR(rbspi->ahb_clk);
+ goto err_put_master;
+ }
+
+ err = clk_enable(rbspi->ahb_clk);
+ if (err)
+ goto err_clk_put;
+
+ rbspi->ahb_freq = clk_get_rate(rbspi->ahb_clk);
+ if (!rbspi->ahb_freq) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ platform_set_drvdata(pdev, rbspi);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ err = -ENOENT;
+ goto err_clk_disable;
+ }
+
+ rbspi->base = ioremap(r->start, r->end - r->start + 1);
+ if (!rbspi->base) {
+ err = -ENXIO;
+ goto err_clk_disable;
+ }
+
+ rbspi->master = master;
+ rbspi->spi_ctrl_flash = get_spi_ctrl(rbspi, SPI_FLASH_HZ, "FLASH");
+ rbspi->spi_ctrl_fread = get_spi_ctrl(rbspi, SPI_CPLD_HZ, "CPLD");
+ rbspi->cs_wait = -1;
+
+ spin_lock_init(&rbspi->lock);
+ INIT_LIST_HEAD(&rbspi->queue);
+
+ err = spi_register_master(master);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register SPI master\n");
+ goto err_iounmap;
+ }
+
+ return 0;
+
+err_iounmap:
+ iounmap(rbspi->base);
+err_clk_disable:
+ clk_disable(rbspi->ahb_clk);
+err_clk_put:
+ clk_put(rbspi->ahb_clk);
+err_put_master:
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(master);
+err_out:
+ return err;
+}
+
+static int rb4xx_spi_remove(struct platform_device *pdev)
+{
+ struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
+
+ iounmap(rbspi->base);
+ clk_disable(rbspi->ahb_clk);
+ clk_put(rbspi->ahb_clk);
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(rbspi->master);
+
+ return 0;
+}
+
+static struct platform_driver rb4xx_spi_drv = {
+ .probe = rb4xx_spi_probe,
+ .remove = rb4xx_spi_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rb4xx_spi_init(void)
+{
+ return platform_driver_register(&rb4xx_spi_drv);
+}
+subsys_initcall(rb4xx_spi_init);
+
+static void __exit rb4xx_spi_exit(void)
+{
+ platform_driver_unregister(&rb4xx_spi_drv);
+}
+
+module_exit(rb4xx_spi_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files-3.14/drivers/spi/spi-vsc7385.c b/target/linux/ar71xx/files-3.14/drivers/spi/spi-vsc7385.c
new file mode 100644
index 0000000..b712e71
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/drivers/spi/spi-vsc7385.c
@@ -0,0 +1,621 @@
+/*
+ * SPI driver for the Vitesse VSC7385 ethernet switch
+ *
+ * Copyright (C) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/firmware.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/vsc7385.h>
+
+#define DRV_NAME "spi-vsc7385"
+#define DRV_DESC "Vitesse VSC7385 Gbit ethernet switch driver"
+#define DRV_VERSION "0.1.0"
+
+#define VSC73XX_BLOCK_MAC 0x1
+#define VSC73XX_BLOCK_2 0x2
+#define VSC73XX_BLOCK_MII 0x3
+#define VSC73XX_BLOCK_4 0x4
+#define VSC73XX_BLOCK_5 0x5
+#define VSC73XX_BLOCK_SYSTEM 0x7
+
+#define VSC73XX_SUBBLOCK_PORT_0 0
+#define VSC73XX_SUBBLOCK_PORT_1 1
+#define VSC73XX_SUBBLOCK_PORT_2 2
+#define VSC73XX_SUBBLOCK_PORT_3 3
+#define VSC73XX_SUBBLOCK_PORT_4 4
+#define VSC73XX_SUBBLOCK_PORT_MAC 6
+
+/* MAC Block registers */
+#define VSC73XX_MAC_CFG 0x0
+#define VSC73XX_ADVPORTM 0x19
+#define VSC73XX_RXOCT 0x50
+#define VSC73XX_TXOCT 0x51
+#define VSC73XX_C_RX0 0x52
+#define VSC73XX_C_RX1 0x53
+#define VSC73XX_C_RX2 0x54
+#define VSC73XX_C_TX0 0x55
+#define VSC73XX_C_TX1 0x56
+#define VSC73XX_C_TX2 0x57
+#define VSC73XX_C_CFG 0x58
+
+/* MAC_CFG register bits */
+#define VSC73XX_MAC_CFG_WEXC_DIS (1 << 31)
+#define VSC73XX_MAC_CFG_PORT_RST (1 << 29)
+#define VSC73XX_MAC_CFG_TX_EN (1 << 28)
+#define VSC73XX_MAC_CFG_SEED_LOAD (1 << 27)
+#define VSC73XX_MAC_CFG_FDX (1 << 18)
+#define VSC73XX_MAC_CFG_GIGE (1 << 17)
+#define VSC73XX_MAC_CFG_RX_EN (1 << 16)
+#define VSC73XX_MAC_CFG_VLAN_DBLAWR (1 << 15)
+#define VSC73XX_MAC_CFG_VLAN_AWR (1 << 14)
+#define VSC73XX_MAC_CFG_100_BASE_T (1 << 13)
+#define VSC73XX_MAC_CFG_TX_IPG(x) (((x) & 0x1f) << 6)
+#define VSC73XX_MAC_CFG_MAC_RX_RST (1 << 5)
+#define VSC73XX_MAC_CFG_MAC_TX_RST (1 << 4)
+#define VSC73XX_MAC_CFG_BIT2 (1 << 2)
+#define VSC73XX_MAC_CFG_CLK_SEL(x) ((x) & 0x3)
+
+/* ADVPORTM register bits */
+#define VSC73XX_ADVPORTM_IFG_PPM (1 << 7)
+#define VSC73XX_ADVPORTM_EXC_COL_CONT (1 << 6)
+#define VSC73XX_ADVPORTM_EXT_PORT (1 << 5)
+#define VSC73XX_ADVPORTM_INV_GTX (1 << 4)
+#define VSC73XX_ADVPORTM_ENA_GTX (1 << 3)
+#define VSC73XX_ADVPORTM_DDR_MODE (1 << 2)
+#define VSC73XX_ADVPORTM_IO_LOOPBACK (1 << 1)
+#define VSC73XX_ADVPORTM_HOST_LOOPBACK (1 << 0)
+
+/* MII Block registers */
+#define VSC73XX_MII_STAT 0x0
+#define VSC73XX_MII_CMD 0x1
+#define VSC73XX_MII_DATA 0x2
+
+/* System Block registers */
+#define VSC73XX_ICPU_SIPAD 0x01
+#define VSC73XX_ICPU_CLOCK_DELAY 0x05
+#define VSC73XX_ICPU_CTRL 0x10
+#define VSC73XX_ICPU_ADDR 0x11
+#define VSC73XX_ICPU_SRAM 0x12
+#define VSC73XX_ICPU_MBOX_VAL 0x15
+#define VSC73XX_ICPU_MBOX_SET 0x16
+#define VSC73XX_ICPU_MBOX_CLR 0x17
+#define VSC73XX_ICPU_CHIPID 0x18
+#define VSC73XX_ICPU_GPIO 0x34
+
+#define VSC73XX_ICPU_CTRL_CLK_DIV (1 << 8)
+#define VSC73XX_ICPU_CTRL_SRST_HOLD (1 << 7)
+#define VSC73XX_ICPU_CTRL_BOOT_EN (1 << 3)
+#define VSC73XX_ICPU_CTRL_EXT_ACC_EN (1 << 2)
+#define VSC73XX_ICPU_CTRL_CLK_EN (1 << 1)
+#define VSC73XX_ICPU_CTRL_SRST (1 << 0)
+
+#define VSC73XX_ICPU_CHIPID_ID_SHIFT 12
+#define VSC73XX_ICPU_CHIPID_ID_MASK 0xffff
+#define VSC73XX_ICPU_CHIPID_REV_SHIFT 28
+#define VSC73XX_ICPU_CHIPID_REV_MASK 0xf
+#define VSC73XX_ICPU_CHIPID_ID_7385 0x7385
+#define VSC73XX_ICPU_CHIPID_ID_7395 0x7395
+
+#define VSC73XX_CMD_MODE_READ 0
+#define VSC73XX_CMD_MODE_WRITE 1
+#define VSC73XX_CMD_MODE_SHIFT 4
+#define VSC73XX_CMD_BLOCK_SHIFT 5
+#define VSC73XX_CMD_BLOCK_MASK 0x7
+#define VSC73XX_CMD_SUBBLOCK_MASK 0xf
+
+#define VSC7385_CLOCK_DELAY ((3 << 4) | 3)
+#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3)
+
+#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \
+ VSC73XX_ICPU_CTRL_BOOT_EN | \
+ VSC73XX_ICPU_CTRL_EXT_ACC_EN)
+
+#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \
+ VSC73XX_ICPU_CTRL_BOOT_EN | \
+ VSC73XX_ICPU_CTRL_CLK_EN | \
+ VSC73XX_ICPU_CTRL_SRST)
+
+#define VSC7385_ADVPORTM_MASK (VSC73XX_ADVPORTM_IFG_PPM | \
+ VSC73XX_ADVPORTM_EXC_COL_CONT | \
+ VSC73XX_ADVPORTM_EXT_PORT | \
+ VSC73XX_ADVPORTM_INV_GTX | \
+ VSC73XX_ADVPORTM_ENA_GTX | \
+ VSC73XX_ADVPORTM_DDR_MODE | \
+ VSC73XX_ADVPORTM_IO_LOOPBACK | \
+ VSC73XX_ADVPORTM_HOST_LOOPBACK)
+
+#define VSC7385_ADVPORTM_INIT (VSC73XX_ADVPORTM_EXT_PORT | \
+ VSC73XX_ADVPORTM_ENA_GTX | \
+ VSC73XX_ADVPORTM_DDR_MODE)
+
+#define VSC7385_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \
+ VSC73XX_MAC_CFG_MAC_RX_RST | \
+ VSC73XX_MAC_CFG_MAC_TX_RST)
+
+#define VSC73XX_MAC_CFG_INIT (VSC73XX_MAC_CFG_TX_EN | \
+ VSC73XX_MAC_CFG_FDX | \
+ VSC73XX_MAC_CFG_GIGE | \
+ VSC73XX_MAC_CFG_RX_EN)
+
+#define VSC73XX_RESET_DELAY 100
+
+struct vsc7385 {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct vsc7385_platform_data *pdata;
+};
+
+static int vsc7385_is_addr_valid(u8 block, u8 subblock)
+{
+ switch (block) {
+ case VSC73XX_BLOCK_MAC:
+ switch (subblock) {
+ case 0 ... 4:
+ case 6:
+ return 1;
+ }
+ break;
+
+ case VSC73XX_BLOCK_2:
+ case VSC73XX_BLOCK_SYSTEM:
+ switch (subblock) {
+ case 0:
+ return 1;
+ }
+ break;
+
+ case VSC73XX_BLOCK_MII:
+ case VSC73XX_BLOCK_4:
+ case VSC73XX_BLOCK_5:
+ switch (subblock) {
+ case 0 ... 1:
+ return 1;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static inline u8 vsc7385_make_addr(u8 mode, u8 block, u8 subblock)
+{
+ u8 ret;
+
+ ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
+ ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
+ ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
+
+ return ret;
+}
+
+static int vsc7385_read(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
+ u32 *value)
+{
+ u8 cmd[4];
+ u8 buf[4];
+ struct spi_transfer t[2];
+ struct spi_message m;
+ int err;
+
+ if (!vsc7385_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = sizeof(buf);
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
+ cmd[1] = reg;
+ cmd[2] = 0;
+ cmd[3] = 0;
+
+ mutex_lock(&vsc->lock);
+ err = spi_sync(vsc->spi, &m);
+ mutex_unlock(&vsc->lock);
+
+ if (err)
+ return err;
+
+ *value = (((u32) buf[0]) << 24) | (((u32) buf[1]) << 16) |
+ (((u32) buf[2]) << 8) | ((u32) buf[3]);
+
+ return 0;
+}
+
+
+static int vsc7385_write(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
+ u32 value)
+{
+ u8 cmd[2];
+ u8 buf[4];
+ struct spi_transfer t[2];
+ struct spi_message m;
+ int err;
+
+ if (!vsc7385_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = sizeof(buf);
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
+ cmd[1] = reg;
+
+ buf[0] = (value >> 24) & 0xff;
+ buf[1] = (value >> 16) & 0xff;
+ buf[2] = (value >> 8) & 0xff;
+ buf[3] = value & 0xff;
+
+ mutex_lock(&vsc->lock);
+ err = spi_sync(vsc->spi, &m);
+ mutex_unlock(&vsc->lock);
+
+ return err;
+}
+
+static inline int vsc7385_write_verify(struct vsc7385 *vsc, u8 block,
+ u8 subblock, u8 reg, u32 value,
+ u32 read_mask, u32 read_val)
+{
+ struct spi_device *spi = vsc->spi;
+ u32 t;
+ int err;
+
+ err = vsc7385_write(vsc, block, subblock, reg, value);
+ if (err)
+ return err;
+
+ err = vsc7385_read(vsc, block, subblock, reg, &t);
+ if (err)
+ return err;
+
+ if ((t & read_mask) != read_val) {
+ dev_err(&spi->dev, "register write error\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static inline int vsc7385_set_clock_delay(struct vsc7385 *vsc, u32 val)
+{
+ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_CLOCK_DELAY, val);
+}
+
+static inline int vsc7385_get_clock_delay(struct vsc7385 *vsc, u32 *val)
+{
+ return vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_CLOCK_DELAY, val);
+}
+
+static inline int vsc7385_icpu_stop(struct vsc7385 *vsc)
+{
+ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
+ VSC73XX_ICPU_CTRL_STOP);
+}
+
+static inline int vsc7385_icpu_start(struct vsc7385 *vsc)
+{
+ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
+ VSC73XX_ICPU_CTRL_START);
+}
+
+static inline int vsc7385_icpu_reset(struct vsc7385 *vsc)
+{
+ int rc;
+
+ rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_ADDR,
+ 0x0000);
+ if (rc)
+ dev_err(&vsc->spi->dev,
+ "could not reset microcode, err=%d\n", rc);
+
+ return rc;
+}
+
+static int vsc7385_upload_ucode(struct vsc7385 *vsc)
+{
+ struct spi_device *spi = vsc->spi;
+ const struct firmware *firmware;
+ char *ucode_name;
+ unsigned char *dp;
+ unsigned int curVal;
+ int i;
+ int diffs;
+ int rc;
+
+ ucode_name = (vsc->pdata->ucode_name) ? vsc->pdata->ucode_name
+ : "vsc7385_ucode.bin";
+ rc = request_firmware(&firmware, ucode_name, &spi->dev);
+ if (rc) {
+ dev_err(&spi->dev, "request_firmware failed, err=%d\n",
+ rc);
+ return rc;
+ }
+
+ rc = vsc7385_icpu_stop(vsc);
+ if (rc)
+ goto out;
+
+ rc = vsc7385_icpu_reset(vsc);
+ if (rc)
+ goto out;
+
+ dev_info(&spi->dev, "uploading microcode...\n");
+
+ dp = (unsigned char *) firmware->data;
+ for (i = 0; i < firmware->size; i++) {
+ rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_SRAM, *dp++);
+ if (rc) {
+ dev_err(&spi->dev, "could not load microcode, err=%d\n",
+ rc);
+ goto out;
+ }
+ }
+
+ rc = vsc7385_icpu_reset(vsc);
+ if (rc)
+ goto out;
+
+ dev_info(&spi->dev, "verifying microcode...\n");
+
+ dp = (unsigned char *) firmware->data;
+ diffs = 0;
+ for (i = 0; i < firmware->size; i++) {
+ rc = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_SRAM, &curVal);
+ if (rc) {
+ dev_err(&spi->dev, "could not read microcode %d\n",
+ rc);
+ goto out;
+ }
+
+ if (curVal > 0xff) {
+ dev_err(&spi->dev, "bad val read: %04x : %02x %02x\n",
+ i, *dp, curVal);
+ rc = -EIO;
+ goto out;
+ }
+
+ if ((curVal & 0xff) != *dp) {
+ diffs++;
+ dev_err(&spi->dev, "verify error: %04x : %02x %02x\n",
+ i, *dp, curVal);
+
+ if (diffs > 4)
+ break;
+ }
+ dp++;
+ }
+
+ if (diffs) {
+ dev_err(&spi->dev, "microcode verification failed\n");
+ rc = -EIO;
+ goto out;
+ }
+
+ dev_info(&spi->dev, "microcode uploaded\n");
+
+ rc = vsc7385_icpu_start(vsc);
+
+out:
+ release_firmware(firmware);
+ return rc;
+}
+
+static int vsc7385_setup(struct vsc7385 *vsc)
+{
+ struct vsc7385_platform_data *pdata = vsc->pdata;
+ u32 t;
+ int err;
+
+ err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_CLOCK_DELAY,
+ VSC7385_CLOCK_DELAY,
+ VSC7385_CLOCK_DELAY_MASK,
+ VSC7385_CLOCK_DELAY);
+ if (err)
+ goto err;
+
+ err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_MAC,
+ VSC73XX_SUBBLOCK_PORT_MAC, VSC73XX_ADVPORTM,
+ VSC7385_ADVPORTM_INIT,
+ VSC7385_ADVPORTM_MASK,
+ VSC7385_ADVPORTM_INIT);
+ if (err)
+ goto err;
+
+ err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
+ VSC73XX_MAC_CFG, VSC7385_MAC_CFG_RESET);
+ if (err)
+ goto err;
+
+ t = VSC73XX_MAC_CFG_INIT;
+ t |= VSC73XX_MAC_CFG_TX_IPG(pdata->mac_cfg.tx_ipg);
+ t |= VSC73XX_MAC_CFG_CLK_SEL(pdata->mac_cfg.clk_sel);
+ if (pdata->mac_cfg.bit2)
+ t |= VSC73XX_MAC_CFG_BIT2;
+
+ err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
+ VSC73XX_MAC_CFG, t);
+ if (err)
+ goto err;
+
+ return 0;
+
+err:
+ return err;
+}
+
+static int vsc7385_detect(struct vsc7385 *vsc)
+{
+ struct spi_device *spi = vsc->spi;
+ u32 t;
+ u32 id;
+ u32 rev;
+ int err;
+
+ err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_MBOX_VAL, &t);
+ if (err) {
+ dev_err(&spi->dev, "unable to read mailbox, err=%d\n", err);
+ return err;
+ }
+
+ if (t == 0xffffffff) {
+ dev_dbg(&spi->dev, "assert chip reset\n");
+ if (vsc->pdata->reset)
+ vsc->pdata->reset();
+
+ }
+
+ err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_CHIPID, &t);
+ if (err) {
+ dev_err(&spi->dev, "unable to read chip id, err=%d\n", err);
+ return err;
+ }
+
+ id = (t >> VSC73XX_ICPU_CHIPID_ID_SHIFT) & VSC73XX_ICPU_CHIPID_ID_MASK;
+ switch (id) {
+ case VSC73XX_ICPU_CHIPID_ID_7385:
+ case VSC73XX_ICPU_CHIPID_ID_7395:
+ break;
+ default:
+ dev_err(&spi->dev, "unsupported chip, id=%04x\n", id);
+ return -ENODEV;
+ }
+
+ rev = (t >> VSC73XX_ICPU_CHIPID_REV_SHIFT) &
+ VSC73XX_ICPU_CHIPID_REV_MASK;
+ dev_info(&spi->dev, "VSC%04X (rev. %d) switch found\n", id, rev);
+
+ return 0;
+}
+
+static int vsc7385_probe(struct spi_device *spi)
+{
+ struct vsc7385 *vsc;
+ struct vsc7385_platform_data *pdata;
+ int err;
+
+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n");
+
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ dev_err(&spi->dev, "no platform data specified\n");
+ return -ENODEV;
+ }
+
+ vsc = kzalloc(sizeof(*vsc), GFP_KERNEL);
+ if (!vsc) {
+ dev_err(&spi->dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&vsc->lock);
+ vsc->pdata = pdata;
+ vsc->spi = spi_dev_get(spi);
+ dev_set_drvdata(&spi->dev, vsc);
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ err = spi_setup(spi);
+ if (err) {
+ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
+ goto err_drvdata;
+ }
+
+ err = vsc7385_detect(vsc);
+ if (err) {
+ dev_err(&spi->dev, "no chip found, err=%d\n", err);
+ goto err_drvdata;
+ }
+
+ err = vsc7385_upload_ucode(vsc);
+ if (err)
+ goto err_drvdata;
+
+ err = vsc7385_setup(vsc);
+ if (err)
+ goto err_drvdata;
+
+ return 0;
+
+err_drvdata:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(vsc);
+ return err;
+}
+
+static int vsc7385_remove(struct spi_device *spi)
+{
+ struct vsc7385_data *vsc;
+
+ vsc = dev_get_drvdata(&spi->dev);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(vsc);
+
+ return 0;
+}
+
+static struct spi_driver vsc7385_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = vsc7385_probe,
+ .remove = vsc7385_remove,
+};
+
+static int __init vsc7385_init(void)
+{
+ return spi_register_driver(&vsc7385_driver);
+}
+module_init(vsc7385_init);
+
+static void __exit vsc7385_exit(void)
+{
+ spi_unregister_driver(&vsc7385_driver);
+}
+module_exit(vsc7385_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <***@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+
diff --git a/target/linux/ar71xx/files-3.14/include/linux/nxp_74hc153.h b/target/linux/ar71xx/files-3.14/include/linux/nxp_74hc153.h
new file mode 100644
index 0000000..20b8845
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/include/linux/nxp_74hc153.h
@@ -0,0 +1,24 @@
+/*
+ * NXP 74HC153 - Dual 4-input multiplexer defines
+ *
+ * Copyright (C) 2010 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _NXP_74HC153_H
+#define _NXP_74HC153_H
+
+#define NXP_74HC153_DRIVER_NAME "nxp-74hc153"
+
+struct nxp_74hc153_platform_data {
+ unsigned gpio_base;
+ unsigned gpio_pin_s0;
+ unsigned gpio_pin_s1;
+ unsigned gpio_pin_1y;
+ unsigned gpio_pin_2y;
+};
+
+#endif /* _NXP_74HC153_H */
diff --git a/target/linux/ar71xx/files-3.14/include/linux/platform/ar934x_nfc.h b/target/linux/ar71xx/files-3.14/include/linux/platform/ar934x_nfc.h
new file mode 100644
index 0000000..4a4e751
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/include/linux/platform/ar934x_nfc.h
@@ -0,0 +1,38 @@
+/*
+ * Platform data definition for the built-in NAND controller of the
+ * Atheros AR934x SoCs
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _AR934X_NFC_PLATFORM_H
+#define _AR934X_NFC_PLATFORM_H
+
+#define AR934X_NFC_DRIVER_NAME "ar934x-nfc"
+
+struct mtd_info;
+struct mtd_partition;
+
+enum ar934x_nfc_ecc_mode {
+ AR934X_NFC_ECC_SOFT = 0,
+ AR934X_NFC_ECC_HW,
+};
+
+struct ar934x_nfc_platform_data {
+ const char *name;
+ struct mtd_partition *parts;
+ int nr_parts;
+
+ bool swap_dma;
+ enum ar934x_nfc_ecc_mode ecc_mode;
+
+ void (*hw_reset)(bool active);
+ void (*select_chip)(int chip_no);
+ int (*scan_fixup)(struct mtd_info *mtd);
+};
+
+#endif /* _AR934X_NFC_PLATFORM_H */
diff --git a/target/linux/ar71xx/files-3.14/include/linux/platform_data/gpio-latch.h b/target/linux/ar71xx/files-3.14/include/linux/platform_data/gpio-latch.h
new file mode 100644
index 0000000..0450e67
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/include/linux/platform_data/gpio-latch.h
@@ -0,0 +1,14 @@
+#ifndef _GPIO_LATCH_H_
+#define _GPIO_LATCH_H_
+
+#define GPIO_LATCH_DRIVER_NAME "gpio-latch"
+
+struct gpio_latch_platform_data {
+ int base;
+ int num_gpios;
+ int *gpios;
+ int le_gpio_index;
+ bool le_active_low;
+};
+
+#endif /* _GPIO_LATCH_H_ */
diff --git a/target/linux/ar71xx/files-3.14/include/linux/platform_data/rb91x_nand.h b/target/linux/ar71xx/files-3.14/include/linux/platform_data/rb91x_nand.h
new file mode 100644
index 0000000..5f17fb8
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/include/linux/platform_data/rb91x_nand.h
@@ -0,0 +1,16 @@
+#ifndef _RB91X_NAND_H_
+#define _RB91X_NAND_H_
+
+#define RB91X_NAND_DRIVER_NAME "rb91x-nand"
+
+struct rb91x_nand_platform_data {
+ int gpio_nce; /* chip enable, active low */
+ int gpio_ale; /* address latch enable */
+ int gpio_cle; /* command latch enable */
+ int gpio_rdy;
+ int gpio_read;
+ int gpio_nrw; /* read/write enable, active low */
+ int gpio_nle; /* latch enable, active low */
+};
+
+#endif /* _RB91X_NAND_H_ */
\ No newline at end of file
diff --git a/target/linux/ar71xx/files-3.14/include/linux/spi/vsc7385.h b/target/linux/ar71xx/files-3.14/include/linux/spi/vsc7385.h
new file mode 100644
index 0000000..1072ad7
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/include/linux/spi/vsc7385.h
@@ -0,0 +1,19 @@
+/*
+ * Platform data definition for the Vitesse VSC7385 ethernet switch driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+struct vsc7385_platform_data {
+ void (*reset)(void);
+ char *ucode_name;
+ struct {
+ u32 tx_ipg:5;
+ u32 bit2:1;
+ u32 clk_sel:3;
+ } mac_cfg;
+};
diff --git a/target/linux/ar71xx/files-3.14/net/dsa/mv88e6063.c b/target/linux/ar71xx/files-3.14/net/dsa/mv88e6063.c
new file mode 100644
index 0000000..5638a9f
--- /dev/null
+++ b/target/linux/ar71xx/files-3.14/net/dsa/mv88e6063.c
@@ -0,0 +1,294 @@
+/*
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
+ * Copyright (c) 2009 Gabor Juhos <***@openwrt.org>
+ *
+ * This driver was base on: net/dsa/mv88e6060.c
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "dsa_priv.h"
+
+#define REG_BASE 0x10
+#define REG_PHY(p) (REG_BASE + (p))
+#define REG_PORT(p) (REG_BASE + 8 + (p))
+#define REG_GLOBAL (REG_BASE + 0x0f)
+#define NUM_PORTS 7
+
+static int reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+ return mdiobus_read(ds->master_mii_bus, addr, reg);
+}
+
+#define REG_READ(addr, reg) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_read(ds, addr, reg); \
+ if (__ret < 0) \
+ return __ret; \
+ __ret; \
+ })
+
+
+static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ return mdiobus_write(ds->master_mii_bus, addr, reg, val);
+}
+
+#define REG_WRITE(addr, reg, val) \
+ ({ \
+ int __ret; \
+ \
+ __ret = reg_write(ds, addr, reg, val); \
+ if (__ret < 0) \
+ return __ret; \
+ })
+
+static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
+{
+ int ret;
+
+ ret = mdiobus_read(bus, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ ret &= 0xfff0;
+ if (ret == 0x1530)
+ return "Marvell 88E6063";
+ }
+
+ return NULL;
+}
+
+static int mv88e6063_switch_reset(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ /*
+ * Set all ports to the disabled state.
+ */
+ for (i = 0; i < NUM_PORTS; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /*
+ * Wait for transmit queues to drain.
+ */
+ msleep(2);
+
+ /*
+ * Reset the switch.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+
+ /*
+ * Wait up to one second for reset to complete.
+ */
+ for (i = 0; i < 1000; i++) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0x8000) == 0x0000)
+ break;
+
+ msleep(1);
+ }
+ if (i == 1000)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6063_setup_global(struct dsa_switch *ds)
+{
+ /*
+ * Disable discarding of frames with excessive collisions,
+ * set the maximum frame size to 1536 bytes, and mask all
+ * interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+
+ /*
+ * Enable automatic address learning, set the address
+ * database size to 1024 entries, and set the default aging
+ * time to 5 minutes.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+
+ return 0;
+}
+
+static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+
+ /*
+ * Do not force flow control, disable Ingress and Egress
+ * Header tagging, disable VLAN tunneling, and set the port
+ * state to Forwarding. Additionally, if this is the CPU
+ * port, enable Ingress and Egress Trailer tagging mode.
+ */
+ REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
+
+ /*
+ * Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the CPU port.
+ */
+ REG_WRITE(addr, 0x06,
+ ((p & 0xf) << 12) |
+ (dsa_is_cpu_port(ds, p) ?
+ ds->phys_port_mask :
+ (1 << ds->dst->cpu_port)));
+
+ /*
+ * Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ return 0;
+}
+
+static int mv88e6063_setup(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ ret = mv88e6063_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise atu */
+
+ ret = mv88e6063_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < NUM_PORTS; i++) {
+ ret = mv88e6063_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+ REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+ REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+ return 0;
+}
+
+static int mv88e6063_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port <= NUM_PORTS)
+ return REG_PHY(port);
+ return -1;
+}
+
+static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr;
+
+ addr = mv88e6063_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_read(ds, addr, regnum);
+}
+
+static int
+mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+ int addr;
+
+ addr = mv88e6063_port_to_phy_addr(port);
+ if (addr == -1)
+ return 0xffff;
+
+ return reg_write(ds, addr, regnum, val);
+}
+
+static void mv88e6063_poll_link(struct dsa_switch *ds)
+{
+ int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ struct net_device *dev;
+ int uninitialized_var(port_status);
+ int link;
+ int speed;
+ int duplex;
+ int fc;
+
+ dev = ds->ports[i];
+ if (dev == NULL)
+ continue;
+
+ link = 0;
+ if (dev->flags & IFF_UP) {
+ port_status = reg_read(ds, REG_PORT(i), 0x00);
+ if (port_status < 0)
+ continue;
+
+ link = !!(port_status & 0x1000);
+ }
+
+ if (!link) {
+ if (netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+ continue;
+ }
+
+ speed = (port_status & 0x0100) ? 100 : 10;
+ duplex = (port_status & 0x0200) ? 1 : 0;
+ fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
+
+ if (!netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+ "flow control %sabled\n", dev->name,
+ speed, duplex ? "full" : "half",
+ fc ? "en" : "dis");
+ netif_carrier_on(dev);
+ }
+ }
+}
+
+static struct dsa_switch_driver mv88e6063_switch_driver = {
+ .tag_protocol = htons(ETH_P_TRAILER),
+ .probe = mv88e6063_probe,
+ .setup = mv88e6063_setup,
+ .set_addr = mv88e6063_set_addr,
+ .phy_read = mv88e6063_phy_read,
+ .phy_write = mv88e6063_phy_write,
+ .poll_link = mv88e6063_poll_link,
+};
+
+static int __init mv88e6063_init(void)
+{
+ register_switch_driver(&mv88e6063_switch_driver);
+ return 0;
+}
+module_init(mv88e6063_init);
+
+static void __exit mv88e6063_cleanup(void)
+{
+ unregister_switch_driver(&mv88e6063_switch_driver);
+}
+module_exit(mv88e6063_cleanup);
diff --git a/target/linux/ar71xx/patches-3.14/100-MIPS-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch b/target/linux/ar71xx/patches-3.14/100-MIPS-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch
new file mode 100644
index 0000000..ecced79
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.14/100-MIPS-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch
@@ -0,0 +1,31 @@
+